Articles
Articles
-
Engineering Laser Systems for Defence Applications
- Information
- Views: 344 hit(s) Pub. Date: 02 April 2024
AUTHOR(S):Ana-Maria Bratu, Cristina Popa, Mioara Petrus, Mihaela Bojan -
Virtual Development of Maximum Torque per Ampere by ANFIS with PI-Based Induction Motor Drive
- Information
- Views: 132 hit(s) Pub. Date: 22 December 2023
AUTHOR(S): G. Madhusudhana Rao -
A Fuzzy Controller for a Dynamically Multivariable Nonlinear Coupling System
- Information
- Views: 385 hit(s) Pub. Date: 01 August 2023
AUTHOR(S): M. H. Saleh, Eman Serag, Tarek Anwar, Mohamed Adel Mandour, Mohamed Abdel Azzem -
Using Artificial Intelligence to Generate Real-time Augmented Reality Content in Book Publishing
- Information
- Views: 390 hit(s) Pub. Date: 28 April 2023
AUTHOR(S):Volodymyr Yakymiv, Lidiia Piskozub, Yosyf Piskozub -
Designing The Stirrer Machine by PI-Controller Using Simulink Design Optimization for Checking Step Response Characteristics
- Information
- Views: 357 hit(s) Pub. Date: 30 December 2022
AUTHOR(S): Natthapon Donjaroennona, Suphatchakan Nuchkumb, Uthen Leeton -
Designing of Cascade Controller by Using the Bees Algorithm
- Information
- Views: 622 hit(s) Pub. Date: 17 November 2022
AUTHOR(S):Murat Sahin, Goksel Kizir -
Study the Behaviors of the Modified Duffing Equation by PPF Control Under the Primary and Internal Resonance Case
- Information
- Views: 446 hit(s) Pub. Date: 05 October 2022
AUTHOR(S):Yaser Amer, Hanan Abd Elrahman, Mansour Abd El-Salamr -
On Special Problems of Robustness in Control Systems
- Information
- Views: 634 hit(s) Pub. Date: 20 January 2022
AUTHOR(S):L. Keviczky, Cs. Bányász -
Computational Techniques for the issue of Variation Problem
- Information
- Views: 605 hit(s) Pub. Date: 14 January 2022
AUTHOR(S):Ashish Dhamanda -
Analysis and Supervision of a Flexible Manufacturing System
- Information
- Views: 707 hit(s) Pub. Date: 23 October 2021
AUTHOR(S):Mohamed Fathi Karoui, Aymen Lachheb, Rania Ben Mahjoub, Mohamed Najeh Lakhoua -
Online Performance Appraising System During COVID-19
- Information
- Views: 662 hit(s) Pub. Date: 21 September 2021
AUTHOR(S): Hanady Al-Zagheer, Samer Barakat -
Tracking of COVID-19 Symptoms using Blockchain Digital Ledger
- Information
- Views: 598 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):Samer Barakat, Hanady Al-Zagheer -
Cipher Design to Secure Images for Cryptographic Applications
- Information
- Views: 675 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):Vinaya Dhavalagi, Punya Prabha V, Chethana Gosal S -
Gradient And Texture Driven Based Sub-Histogram Modulation For Medical Image Enhancement
- Information
- Views: 551 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):Vidyasaraswathi H. N., Hanumantharaju Mc -
Formulization of Cost Estimation in Optimizing Constellation Satellite, Launch Vehicle and Launch Place
- Information
- Views: 639 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):Saeid Kohani, Peng Zong -
Prototyping an IoT-enabled Autonomous Unmanned Ground Vehicle Using SLAM
- Information
- Views: 796 hit(s) Pub. Date: 28 July 2021
AUTHOR(S):Ghulam E. Mustafa Abro, Mujaheed Saleh Abdullahi, Jayasankari Ganasan, Sumayema Kabir Ricky -
Adaptive Second Order Sliding Mode Controller for 2-Dof Serial Flexible Link
- Information
- Views: 739 hit(s) Pub. Date: 10 May 2021
AUTHOR(S):Elias D. Birhan, Beteley Teka -
Agricultural Robots for a Sustainable Green Environment : A Review
- Information
- Views: 892 hit(s) Pub. Date: 20 April 2021
AUTHOR(S):Baskaran S., Ramesh Kumar T., Venkatasa Prabu D., Meenakshi Priya B. -
Design and Implementation of Myoelectric Controlled Arm
- Information
- Views: 746 hit(s) Pub. Date: 07 April 2021
AUTHOR(S):Tariq M. Younes, Mohammad A. Alkhedher, Abdel-Hamid Soliman, Aiman Al Alawin -
Mathematics and ICT Bring New Intelligent Traffic Light Control System
- Information
- Views: 820 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Bernadette Pesamino, Marika Karawalevu, Vineshwar Pillay, Mansour Assaf, Bibhya Sharma, Sandeep Kumar, Avinesh Prasad,Vishal Chand -
Modeling, Simulation and Fault Diagnosis of a Doubly Fed Induction Generator using Bond Graph
- Information
- Views: 781 hit(s) Pub. Date: 27 November 2020
AUTHOR(S):A. T. Boum, D. G. Tatchou Djesseu -
Controllers Comparison to Balancing and Trajectory tracking a Two Wheeled Mobile Robot
- Information
- Views: 947 hit(s) Pub. Date: 17 November 2020
AUTHOR(S):Ahmed J. Abougarair -
Applying Human-Robot Interaction Technology in Retail and Service Businesses
- Information
- Views: 925 hit(s) Pub. Date: 17 November 2020
AUTHOR(S):Woongyeol Joe, So-Young Song -
Prediction of The Dust Concentration in Coal Mine by Fuzzy Fault Tree Analysis
- Information
- Views: 854 hit(s) Pub. Date: 17 November 2020
AUTHOR(S):Gülnaz Daloğlu, Kemal Keski̇n -
Ant Colony Optimization Algorithm Based on Optimal PID Parameters for a Robotic Arm
- Information
- Views: 1191 hit(s) Pub. Date: 14 May 2020
AUTHOR(S):Sid Ahmed Dahmane, Abdelwahab Azzedine, Abdelkader Megueni -
Examining a Mixed Inverse Approach for Stable Control of a Rover
- Information
- Views: 1033 hit(s) Pub. Date: 30 March 2020
AUTHOR(S):Bo Zhang, Jeffrey Uhlmann -
Proportional-Integral Field Oriented Control of Induction Motor with Fuzzy Logic Gains adaptation
- Information
- Views: 1142 hit(s) Pub. Date: 29 December 2019
AUTHOR(S): Chiheb Ben Regaya, Fethi Farhani, Abderrahmen Zaafouri, Abdelkader Chaari -
Design and Analysis of Different Tuning Strategies of PI Controller for Distillation Column
- Information
- Views: 1004 hit(s) Pub. Date: 29 December 2019
AUTHOR(S): E.Kesavan, K.A.Mohamed Junaid, B.Jaison -
Recognizing the Activity Daily Living (ADL) of Subject Independent
- Information
- Views: 1171 hit(s) Pub. Date: 29 December 2019
AUTHOR(S): Y.J.Kee, M.N.Shah Zainudin -
Design of Stable Controller for Rössler Chaotic System
- Information
- Views: 1079 hit(s) Pub. Date: 29 December 2019
AUTHOR(S): Saikat Gope, Sarbani Chakraborty -
Decoupled Integral LQR Controller with Anti-windup Compensator for MIMO Two Rotor Aerodynamical System (TRAS)
- Information
- Views: 1059 hit(s) Pub. Date: 29 December 2019
AUTHOR(S): Saeed Al-Haddad, Herman Wahid -
Comparative Analysis of the Hydrogenerator Technical State Estimation Models in Fuzzy-Information Conditions
- Information
- Views: 1005 hit(s) Pub. Date: 29 December 2019
AUTHOR(S):Mykola V. Kosterev, Volodymyr V. Litvinov, Volodymyr V. Litvinov -
Improve the Accuracy of Short-term Forecasting Algorithms by Standardized Load Profile and Support Regression Vector: Case Study Vietnam
- Information
- Views: 1079 hit(s) Pub. Date: 29 December 2019
AUTHOR(S): Nguyen Tuan Dung, Nguyen Thanh Phuong -
Adaptive Field-Oriented Control with MRAC Regulator for the Permanent Magnet Synchronous Motor
- Information
- Views: 1193 hit(s) Pub. Date: 27 December 2019
AUTHOR(S):Ahmed Chouya, Mohamed Chenafa, Abdellah Mansouri -
Robust Trajectory Tracking Control of Omni-Wheeled Mobile Robots
- Information
- Views: 994 hit(s) Pub. Date: 27 December 2019
AUTHOR(S):Aleksandr Andreev, Olga Peregudova, Katherine Sutyrkina -
Intelligent Prediction of Initial Setting Time for Cement Pastes by Using Artificial Neural Network
- Information
- Views: 1038 hit(s) Pub. Date: 27 December 2019
AUTHOR(S):Pinar Akpinar, Mariya A. Abubakar -
Mechanical Geometry of a Self-adaptive Prehensor with 2 or more Fingers
- Information
- Views: 1066 hit(s) Pub. Date: 27 December 2019
AUTHOR(S):Cezar-Ioan Frincu, Ioan Stroe -
Comparison of Artificial Neural Network Controller and PID Controller in on Line of Real Time Industrial Temperature Process Control
- Information
- Views: 1262 hit(s) Pub. Date: 11 December 2019
AUTHOR(S):Abdulgani Albagul, Hafed Efheij, Beleid Alsharif -
A Neuro-fuzzy Artificial Intelligence System
- Information
- Views: 1282 hit(s) Pub. Date: 02 December 2019
AUTHOR(S):Jelenka Savkovic Stevanovic -
Finite Control Set – Model Predictive Control of a Nine Level Packed U Cell Grid Connected Multilevel Inverter
- Information
- Views: 1236 hit(s) Pub. Date: 26 November 2019
AUTHOR(S): Alaa’Abuqubaita, Sameer Khader, Abdel Karim Daud, Hamza Makhamreh -
Analysis, Review and Development of a Conceptual Model, based on Class Diagrams as a Component of UML, Focused on Industrial Automation
- Information
- Views: 1543 hit(s) Pub. Date: 14 May 2019
AUTHOR(S):Erik F. Méndez Garcés, Gabriela M. Mafla, Francisco Reyes -
RIDR Model for Crowd Management using RFID Technology
- Information
- Views: 1767 hit(s) Pub. Date: 22 February 2019
AUTHOR(S):Hossam Eladly -
Estimating of Analysis Results for Structures with Linear Base Isolation Systems using Artificial Neural Network Model
- Information
- Views: 1524 hit(s) Pub. Date: 04 December 2018
AUTHOR(S):Melda Yucel, Seda Öncü-Davas, Sinan Melih Nigdeli, Gebrail Bekdas, Selçuk Sevgen -
Design of an Augmented Automatic Choosing Control by Weighted Gradient Optimization Automatic Choosing Functions for Nonlinear Systems
- Information
- Views: 1373 hit(s) Pub. Date: 22 November 2018
AUTHOR(S):Toshinori Nawata -
Integration of Low-Cost Vision System with the Fanuc M-1ia Robot for Sorting and Assembly Operations
- Information
- Views: 1715 hit(s) Pub. Date: 25 September 2018
AUTHOR(S):L. Van Der Westhuizen, I. A. Gorlach -
How Should a Robot Caregiver for Elderly People Be?
- Information
- Views: 1684 hit(s) Pub. Date: 25 August 2018
AUTHOR(S): Melissa Ferretti, Giovanna Morgavi, Gianmarco Veruggio -
Application of Nonlinear Autoregressive Neural Network with Exogen for Modeling Demographic Dynamics in Large Urban Agglomeration
- Information
- Views: 1736 hit(s) Pub. Date: 12 April 2018
AUTHOR(S): Dmitry Tarasov, Alexander Sergeev, Ashat Sydikhov -
Aggressive and Peaceful Strategies in Cellular Resource Space
- Information
- Views: 1768 hit(s) Pub. Date: 23 January 2018
AUTHOR(S): Valentine Zavertanyy, Aleksandr Makarenko -
Balancing Control of Two Wheeled Mobile Robot Based on Decoupling Controller
- Information
- Views: 2251 hit(s) Pub. Date: 22 January 2018
AUTHOR(S): Ahmed J. Abougarair, Elfituri S. Elahemer -
Nonlinear Disturbance Observer Based Control of a 7DoF Exoskeleton Robot for Arm Movements
- Information
- Views: 1831 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Houda Barbouch, Abderraouf Khemiri, Nahla Khraief, Safya Belghith -
Inner Feedback Robust Control Design of a Laboratory Heat Exchanger
- Information
- Views: 1830 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Libor Pekař, Roman Prokop -
Stability Analysis of Photovoltaic Systems Using Krasovskii’s Method Based on The Second Method Of Liapunov
- Information
- Views: 1804 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Anbarasi Mp, Jovitha Jerome -
A Signal Identification Model for MIMO Design
- Information
- Views: 1784 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): A.Vimala, P.Karthigaikumar, Y.Camy Joshya -
Intelligent Wireless Fire Extinguishing Robot
- Information
- Views: 2417 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Akib Islam, P.Sathya -
A Mathematic Model on Differential Game based Flight-Path Angle Control Guidance Law
- Information
- Views: 1824 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Xing-Yuan Xu, Yun-peng Liang, Yuan-li Cai -
Electric Vehicle Speed Control using Three Phase Inverter operated by DSP-based Space Vector Pulse Width Modulation Technique
- Information
- Views: 1763 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Saidi Hamza, Noureddinemansour, Midounabdelhamid -
The Identification of impulsive noise in HFC networks use Wavelets
- Information
- Views: 1777 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Suzene Fausto, Aldo Artur Belardi -
Adaptive Neuro-Fuzzy Scheduled Load Frequency Controller for Multi Source Multi Area System Interconnected via Asynchronous Tie-line
- Information
- Views: 1861 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): K.R.M. Vijaya Chandrakala, S. Balamurugan -
Trajectory Control of a Variable Loaded Servo System by using Fuzzy Iterative Learning PID Control
- Information
- Views: 1747 hit(s) Pub. Date: 29 December 2017
AUTHOR(S): Omer Aydogdu, Mehmet Latif Levent -
Robust Pss-pid Based Ga Optimization For Turboalternator
- Information
- Views: 1738 hit(s) Pub. Date: 29 December 2017
AUTHOR(S): Amina Derrar, Abdelatif Naceri, Djamel El Dine Ghouraf -
New Approach in Admission Control Realisation
- Information
- Views: 1918 hit(s) Pub. Date: 12 December 2017
AUTHOR(S): Erik Chromy, Marek Holiencin, Ivan Baronak, Ladislav Behan -
Optimization of Filtering Properties of the Control System with the Smith Predictor
- Information
- Views: 1620 hit(s) Pub. Date: 12 December 2017
AUTHOR(S): Gennadii Samsonov, German Michalconok -
Nonlinear quadratic dynamic matrix control of a fluidized catalytic cracking unit
- Information
- Views: 1861 hit(s) Pub. Date: 01 December 2017
AUTHOR(S): A.T. Boum, D. Bingong, J.P. Corriou -
Speed control of switched reluctance motor using genetic algorithm and ant colony based on optimizing PID controller
- Information
- Views: 1834 hit(s) Pub. Date: 28 November 2017
AUTHOR(S): Hassan El-sayed Ahmed Ibrahim, Mohamed Said Sayed Ahmed, Khaled Mohamed Awad -
Simulations of Average Simplified Predictive Control
- Information
- Views: 1711 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Samer Mansour, Jalal Karam -
A Microcontroller Implementation of Fractional Order Controller
- Information
- Views: 2349 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Aymen Rhouma, Hafsi Sami -
Robust Predictive Controller Based on an Uncertain Fractional Order Model
- Information
- Views: 1708 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Aymen Rhouma, Sami Hafsi -
Pruning in Detection of Multiple Routes for Required Throughput in Wireless Multihop Networks
- Information
- Views: 1534 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Hiroaki Higaki -
Backstepping approach and Bio Inspired model based hybrid sliding-mode tracking control for Airship
- Information
- Views: 1947 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Tami Y., Melbous A., Guessoum A. -
An Augmented Automatic Choosing Control Designed by Extremizing a Combination of Hamiltonian and Lyapunov Functions for Nonlinear Systems
- Information
- Views: 1570 hit(s) Pub. Date: 15 November 2017
AUTHOR(S): Toshinori Nawata -
Integrated Control of the Manufacturing System
- Information
- Views: 1673 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Daschievici Luiza, Ghelase Daniela, Ioana Diaconescu -
A Fuzzy Inference Systems Approach for Risk Evaluation of Dairy Products Manufacturing Systems
- Information
- Views: 1740 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Dayo S. Ogunyale, Rene V. Mayorga -
Development of a Robot Cell with a Vision System
- Information
- Views: 1523 hit(s) Pub. Date: 25 September 2017
AUTHOR(S): E. Liebenberg, I. A. Gorlach -
Optimized Fuzzy Control of a Two-Wheeled Mobile Pendulum System
- Information
- Views: 1615 hit(s) Pub. Date: 25 September 2017
AUTHOR(S): Ákos Odry, István Kecskés, Ervin Burkus, Zoltán Király, Péter Odry -
A Multi-Interface Meter Concentration Unit to Improve Residential Energy Efficiency Awareness
- Information
- Views: 1653 hit(s) Pub. Date: 29 August 2017
AUTHOR(S): Baycan Vural, Eser Takmaz, Oguzhan Urhan -
Usage of Simulation for Testing of Process Control Systems in Mining
- Information
- Views: 1686 hit(s) Pub. Date: 17 August 2017
AUTHOR(S): V.V. Okolnishnikov, S.V. Rudometov, S.R. Shakirov, S.S. Zhuravlev -
An Application of Fuzzy Numbers to Assessment of Human Activities
- Information
- Views: 1610 hit(s) Pub. Date: 25 July 2017
AUTHOR(S): Michael Gr. Voskoglou -
A Study on the Analysis of Static and Dynamic Characteristic of Fusion Reducer Module
- Information
- Views: 1696 hit(s) Pub. Date: 21 June 2017
AUTHOR(S): Joo Han Kim, Myungsung Lee -
Energy Efficient Fuzzy Logic Control of Indoor Air-Conditioning in Real Time
- Information
- Views: 1784 hit(s) Pub. Date: 21 June 2017
AUTHOR(S): Snejana Yordanova -
Controller design of the multivariable process control system
- Information
- Views: 1756 hit(s) Pub. Date: 19 June 2017
AUTHOR(S): Niyonsaba Therence, Uwizeyimana Providence, Ntaryamira Evariste, Akimana Rachelle -
On the Effect of the Lambda Parameter on Performance and Stability Indexes in DMC Control
- Information
- Views: 1809 hit(s) Pub. Date: 15 May 2017
AUTHOR(S): Jose Manuel Lopez-Guede, Ana Boyano, Igor Ansoategui, Ekaitz Zulueta, Jose Antonio Ramos-Hernanz -
Intelligent Feedback Mobile Robot Control System Using Multiprocessor
- Information
- Views: 1712 hit(s) Pub. Date: 24 April 2017
AUTHOR(S): Mahmoud Mohammad Al-Suod, A. O. Ushakenko -
Warning System and Storing Method of Perilous environment for a Teleoperated Robot Operator
- Information
- Views: 1670 hit(s) Pub. Date: 24 March 2017
AUTHOR(S): Hitoshi Kono -
Two stages nonlinear systems identification
- Information
- Views: 1734 hit(s) Pub. Date: 08 March 2017
AUTHOR(S): Adil Brouri -
An Intelligent Robust Control of Wheeled Mobile Robot in Restricted Environment
- Information
- Views: 2022 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Mohammed A. H. Ali, Musa Mailah, Wan Azhar B. Yussof, Zamzuri Bin Hamedon, Zulkili B. M. Yussof -
Self-Augmenting Knowledge Base for Informed Decision Making
- Information
- Views: 1755 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Les Sztandera -
Delay-Dependent H8 Performance for Neutral System with Interval Time-Varying Delays
- Information
- Views: 1787 hit(s) Pub. Date: 13 December 2016
AUTHOR(S): Sirada Pinjai, Kanit Mukdasai -
Robust Exponential Stability of a Class of Uncertain Lur’e Systems of Neutral Type Bywirtinger-Based Integral Inequality
- Information
- Views: 1788 hit(s) Pub. Date: 13 December 2016
AUTHOR(S): Nuntawan Jinati, Saovalak Vunpoang, Orathai Saradee, Wajaree Weera -
A Robot and Precision Greenhouse Farming
- Information
- Views: 1986 hit(s) Pub. Date: 25 October 2016
AUTHOR(S): Jiftah Ben Asher, Arkadi Zilbeman, Benayhu Bar Yosef, Eran Gitler -
Design of Neural Predictor for Performance Analysis of Experimental Automated System in Oral Photography of Dental Treatment
- Information
- Views: 1705 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Cem A. Gürgan, Sahin Yildirim -
Force Analysis of a Modified Mechanism System Using Artificial Neural Networks
- Information
- Views: 1700 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Sahin Yildirim -
Exploration of the K Parameter in Hand-Written Digit Recognition by K-Nearest Neighbor Algorithm
- Information
- Views: 1983 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Ivaylo Penev, Milena Karova, Mariana Todorova -
Logical Formalization of Human Intuitive Mental Imagery for Spatiotemporal Language Understanding
- Information
- Views: 1907 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Rojanee Khummongkol, Masao Yokota -
Track Fusion Performance of Multi-Track Integration System with a Test Vessel
- Information
- Views: 1747 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Kwantae Cho, Juyoung Kim, Byung-Gil Lee -
Method for Optimizing the Number and Precision of Interval-Valued Parameters in a Multi-Object System
- Information
- Views: 1798 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Amaury Caballero, Kang Yen, Jose L. Abreu, Aldo Pardo -
HIL Simulation as Rapid Prototyping Method in Control Engineering
- Information
- Views: 1999 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Lorand Bogdanffy, Emil Pop, Gabriel Ilcea -
Design of Neural Network Based Fuzzy Inference System for Speed Control of Heavy Duty Vehicles with Electronic Throttle Control System
- Information
- Views: 1844 hit(s) Pub. Date: 22 April 2016
AUTHOR(S):Ikbal Eski, Sahin Yildirim -
A Flexible Generalized Minimum Variance Controller for MIMO Time-Varying Systems
- Information
- Views: 1566 hit(s) Pub. Date: 13 April 2016
AUTHOR(S):Zheng Li -
The Continuous-Time Hinfinity Model Matching Problem: 1 DOF Static State Feedback with Integral Control Approach
- Information
- Views: 1796 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Murat Akin, Tankut Acarman -
Evaluation of Geographical Information System and Intelligent Prediction of Solar Energy
- Information
- Views: 1857 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Hayder H. Abbas, Adnan Khashman -
Modeling Using Neural Networks: Application to a Linear Incremental Machine
- Information
- Views: 1884 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Rawia Rahali, Walid Amri, Abdessattar Ben Amor -
Dominant-Dynamics-Based Reduced Order Modeling Using Genetic Algorithm
- Information
- Views: 1831 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Adnan M. Al-Smadi, Othman M. Al-Smadi, Mais W. Marji -
New Fuzzy Aggregations. Part III: Application of New FPOWA Operators in the Problem of Political Management
- Information
- Views: 2150 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Gia Sirbiladze, Otar Badagadze, Gvantsa Tsulaia -
New Fuzzy Aggregations. Part II: Associated Probabilities in the Aggregations of the POWA
- Information
- Views: 2013 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Gia Sirbiladze, Otar Badagadze, Gvantsa Tsulaia -
New Fuzzy Aggregations. Part I: General Decision Making System and its Information Structure
- Information
- Views: 2009 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Gia Sirbiladze, Otar Badagadze, Gvantsa Tsulaia -
Extended Relay Feedback Identification and Anisochronic Control
- Information
- Views: 2045 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): Milan Hofreiter, Pavel Trnka, Martin Huncovsky, Petr Siegel -
Process Control Application of an Alternative Two Degrees of Freedom Data-Driven VRFT Controller
- Information
- Views: 2055 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): Jose David Rojas, Orlando Arrieta, Ramon Vilanova -
Information Identification Models in Variable Structure Control Systems
- Information
- Views: 1993 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): Natalia N. Bakhtadze, Ekaterina A. Sakrutina -
Controllers Comparison to Stabilize a Two-Wheeled Inverted Pendulum: PID, LQR and Sliding Mode Control
- Information
- Views: 2366 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): Juan Villacres, Michelle Viscaino, Marco Herrera, Oscar Camacho -
Nontraditional Approach to Satellite Attitude Estimation
- Information
- Views: 2320 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): Chingiz Hajiyev, Demet Cilden -
A New Delay-Dependent Absolute Stability of Lur’ e Systems for Neutral Type with Time-Varying Delays
- Information
- Views: 2103 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): Wajaree Weera, Piyapong Niamsup -
To Develop a New Arcless and Power-Saving Power Relay with Hybrid Contacts
- Information
- Views: 2337 hit(s) Pub. Date: 15 February 2016
AUTHOR(S): Chieh-Tsung Chi
Editorial Board
Editor-in-Chief
Prof. George Vachtsevanos, Georgia Institute of Technology, Atlanta, Georgia, USA
Members of the Editorial Board
Prof. Wasfy B. Mikhael, IEEE Fellow, Vice President IEEE Circuits and Systems,University of Central Florida, Orlando, USA |
Prof. Pierre Borne, IEEE France Section Chair, IEEE Fellow, IEEE/SMC Past President, Ecole Centrale de Lille, France |
Prof. Daniel Kammen, University of California, Berkeley, USA |
Prof. David A. Johnson, University of Waterloo, CanadaProf. D. Subbaram Naidu, IEEE Fellow, Idaho State University, USA |
Prof. Panos M. Pardalos, Distinguished Professor of Industrial and Systems Engineering, University of Florida, USA |
Prof. Jan Awrejcewicz, Technical University of Lodz, Lodz, Poland |
Prof. Imre J. Rudas, Obuda University, Budapest, Hungary |
Prof. Carla Pinto, Polytechnic of Porto, Porto, Portugal |
Prof. Hung-Yuan Chung, National Central University, Taiwan |
Prof. Dimitrios A. Karras, Sterea Hellas Institute of Technology, Greece |
Prof. Elbrous M. Jafarov, Istanbul Technical University, Istanbul, Turkey |
Prof. Tadeusz Kaczorek, IEEE Fellow, Warsaw University of Technology, Poland |
Prof. Yuriy S. Shmaliy (IEEE Fellow), Universidad de Guanajuato, MEXICO |
Aims and Scope
Aims and Scope
The International Journal of Control Systems and Robotics is an open access journal. The goal of this journal is to provide a platform for academicians, researchers and practitioners all over the world to promote, share, and discuss various new issues and developments in all areas of Control Systems and Robotics. Manuscripts are subject to a rigorous and fair peer-review process. Accepted papers will appear online within 3-4 weeks after their submission. The journal publishes papers including but not limited to the following topics:
:
Circuits and Electronics for Control, Electrical and Electronic Measurement, Large Scale Systems, Hierarchical Control, Hybrid Systems, Digital Control, Fuzzy Systems and Fuzzy Control, Neural Networks and Neural Control, Genetic Algorithms and Evolutionary Control, Intelligent Control, Non-linear Systems and Non-Linear Automatic Control, Sliding Mode Control, Differential Geometry methods in non-linear control, Adaptive Control, Robust Control, Optimal Control, Stochastic Control, Satellite Systems Control, Industrial Control, CAD/CAM systems, Manufacturing Systems Control, Man-Machine Interaction, Cybernetics, Chemical processes control, Multivariable Control, Multirate Control, Parallel and Distributed Systems, Decentralized Control, Real-time Control, Human-Machine Systems and Cybernetics, Modeling, Simulation, Optimization Problems in Control Engineering, Decision Support Systems, Failure of Systems, Fault Tolerance, Diagnostics, Machine Learning, Knowledge Acquisition, Virtual Reality for Automation, Microprocessors, Embedded Systems, Geometric modeling and Fractals, Financial Aspects in Control Engineering, Control of Large Systems via Internet, Control Education, Automation in Biology, Automation in Medicine, Automation in Chemical Engineering, Machines and Mechanical Engineering, Control in Agriculture, Control in Business, Management and Economics, Control in Social Sciences, Applications in Astronomy (telescopes), Signal Processing Systems for Control, Application in Underwater Systems and Oceanic Engineering, Unmanned Vehicles, Artificial Man, Philosophical Aspects of Control, Instrumentation and Measurement, Sensors, Data and Knowledge Acquisition, Industrial Measurement, Electronics, VLSI for Manufacturing Systems, Supervision, Diagnosis and Man-Machine Interaction,, Flexible Structures, Modeling and Model Reduction, Production Planning, Scheduling and CIME, Quintitative methods, Transportation Systems, Environmental Engineering, Water and Gas Systems, Decision Support Systems, Large Scale manufacturing processes, Industrial Control, Complex Systems, Chemical Industry, Oil Industry, Car Industry, Mechatronics, Power Systems, Aerospace and Naval Applications, Modelling, analysis and simulation, Kinematics, Dynamics and Control of robots, Robotics materials, Robotics languages, Human-Robot Interfaces, Motion and path planning, Manipulation and Grasping, Legged and Whiled Robots, Discrete Event Dynamics Systems, Petri Nets, Distributed Robotics Systems, Cellular and Biologically Inspired Robots, Sensor Design, Integration and Fusion, Personal and Service Robots, Space and underwater Robots, Teleoperation, Telerobotics, Network Robotics, Nanotechnologies in Robotics, Communication problems in robotics, Mechatronics, Electronics for robotics systems, Complex architectures, Neural Networks, Fuzzy logic and Evolutionary Computation in Robots, Robot Vision, Man-machine systems, Cybernetics, Bio-cybernetics, Artificial life, Remote sensing, Industrial Applications
Special Issues
Special Issues
1. Open Special Issues
At the moment we have no open Special Issue2. Special Issue Guidelines: Every proposal for special issue must be sent to us and should include the following
The journal for which the Special Issue is intended
* A suggested title for the Special Issue
* Proposed Aims and Scope
* A list of Guest Editors who will join the Lead Guest Editor in managing the Special Issue, including their names, emails, affiliations, and a short biography (one paragraph) of each of the Guest Editors
* A proposed timeline and schedule which includes:
* Deadline for submission (6 months from the initial Call-for-Papers)
* First round of review (3 months after submission deadline)
* Tentative publication date (3 months after the first round of review)
All proposals are subject to approval by the journal following a discussion of the proposed Special Issue among the journals Editorial Board. If approved, a Call-for-Papers for the Special Issue will be issued and posted online.
Each proposal will be evaluated by three independent experts according to the following Criteria
* Relevance to the Journal
* Scientific - Technical Originality,
* Scientific content And advances beyond the State-Of-The-Art
* Potential Impact and tnterest for the readers
The Guest Editors cannot act as reviewers for the Special Issues manuscripts. This is to ensure a high-quality, fair, and unbiased peer-review process of every manuscript submitted to the journal, since any manuscript must be recommended by one or more (usually two or more) external reviewers and the Guest Editor before acceptance for publication.
The name of the Guest Editor recommending the manuscript for publication is published with the manuscript to indicate and acknowledge their invaluable contribution to the peer-review process and the indispensability of their contributions to the running of the journals.
The peer-review process is single blinded; that is, the reviewers know who the authors of the manuscript are, but the authors do not have access to the information of who the peer reviewers are. Every journal published by Hindawi has an acknowledgment page for the researchers who have performed the peer-review process for at least one manuscript in the past year. Without the significant contributions made by these researchers, the publication of the journal would not be possible.
3. Published Special Issues
At the moment we have no open Special IssueTime for Publication
Time for Publication
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
Indexes
Indexes
Web of Science (Clarivate Analytics)
There are 675 citations for articles published in this journal, which increase by 45% compared to citations as of December 2021.
Google Scholar
There are 2421 citations for articles published in this Journal as of December 2023 based on the statistics from Google Scholar.
The 2-year Google-based Journal Impact Factor (2-GJIF) is 1.93.
This journal is indexed by the following indexes - databases:
Index Copernicus
Cosmos Impactfactors
Google Scholar
International Institute Of Organized Research (I2OR)
ROAD
Polish Scholarly Bibliography (PBN)
Research Bible
JURN
Scientific Indexing Services (SIS)
Eurasian Scientific Journal Index
EBSCO
Academic Journals Database
AiritiLibrary
Autoritetslister for serier og forlag
Base Search
CALIS
ChaoXing Periodicals
Chemical Abstracts Service (CAS)
Citefactor
CNKI SCHOLAR
Cnplinker
COPAC
CQVIP
DTU Findit
Elektronische Zeitschriftenbibliothek(EZB)
GETIT@YALE(Yale University Library)
Harvard Library E-Journals
Infotrieve
i-Scholar
JournalSeek
JournalTOCs
MIAR
National Science and Technology Library(NSTL)
National Science Library, Chinese Academy of Sciences (NSLC)
Open Access Journals Search Engine(OAJSE)
Open Access Library
Open J-Gate
PUBDB DESY Publication Database
Research Bible
ResearchGate
SciFinder
SciLit
SHERPA/RoMEO
Stanford University Libraries
Système Universitaire de Documentation (Sudoc)
Technische Informationsbibliothek (TIB)
The Library of Congress
Ulrich’s Periodicals Directory
WanFang
World Journal Clout Index (2021 STM)
Worldcat
Zeitschriftendatenbank (ZDB)
Review Process
Review Process
IARAS sends each paper to 3 independent reviewers, experts in the area of the paper. So, each paper will be evaluated by three independent experts according to the following Criteria
1) Relevance to the Journal
2) Scientific - Technical Originality, Potential Impact and Interest for the audience
3) Scientific/Technical Content and Advances beyond The State-Of-The-Art
4) Quality of the Presentation, clarity of the Content
5) Comments for the authors
The reviewers are going to indicate their familiarity with the paper's subject, evaluate the paper along the aforementioned criteria. Finally, the Editor-in-Chief or a Member of the Editorial Board will decide whether a paper will be accepted or not.
Our Score System will classify the papers as follows
* Publish as it is
* Consider after Minor Changes
* Consider after Major Changes
* Reject
If the Editor recommends Publish as it is the manuscript will undergo a final check by the journals editorial office in order to ensure that the manuscript and its review process adhere to the journals guidelines and policies. Once this is done, the authors will be notified of the manuscripts acceptance, and the manuscript will appear in the Articles in Press section of the journals website.
If the Editor recommends Consider after Minor Changes, the authors are notified to prepare and submit a final copy of their manuscript with the required minor changes suggested by the reviewers. The Editor reviews the revised manuscript after the minor changes have been made by the authors. Once the Editor is satisfied with the final manuscript, the manuscript can be accepted.
If the Editor recommends Consider after Major Changes, the recommendation is communicated to the authors. The authors are expected to revise their manuscripts in accordance with the changes recommended by the reviewers and to submit their revised manuscript in a timely manner. Once the revised manuscript is submitted, the Editor can then make an editorial recommendation which can be Publish Unaltered, Consider after Minor Changes, or Reject.
If the Editor recommends rejecting the manuscript, the rejection is immediate. Also, if the majority of the reviewers recommend rejecting the manuscript, the rejection is immediate.
All journals published by IARAS are committed to publishing only original material, i.e., material that has neither been published elsewhere, nor is under review elsewhere. IARAS as a participant of CrossCheck uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. Manuscripts that are found to have been plagiarized from a manuscript by other authors, whether published or unpublished, will incur plagiarism sanctions.
Publication Ethics and Publication Malpractice Statement
Publication Ethics and Publication Malpractice Statement
STATEMENT:
IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct. ΙARAS follows strictly these GUIDELINES ON GOOD PUBLICATION PRACTICE (from COPE): https://publicationethics.org/files/u7141/1999pdf13.pdf
The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow")
Terms of Collaboration
1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals.
2). After the Review process is completed by the Assoc. Editor and the Reviewers, it is no longer allowed for the authors to withdraw their paper.
3). PEER REVIEW: All submitted papers are subject to strict peer-review process by at least three international reviewers that are experts in the area of the particular paper. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. The possible decisions include acceptance, acceptance with revisions, or rejection.
4). If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted.
5). Rejected articles will not be re-reviewed.
6). Articles may be rejected without review if they are obviously not suitable for publication.
7). The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism.
8). The reviewers evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.
9). The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
10). Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.
11). Peer review assists the publisher in making editorial decisions and through the editorial communications with the experts form the scientific board ant the author may also assist the author in improving the paper.
12). Manuscripts received for review are treated as confidential documents and are reviewed by anonymous staff.
13). A reviewer should also call to the publisher's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.
14). Authors of contributions and studies research should present an accurate account of the work performed as well as an objective discussion of its significance.
15). A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable.
16). The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
17). Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
18). Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
19). All sources of financial support for the project should be disclosed.
20). Authors should make themselves aware of the paper processing charges and registration fees of the publication they submit a paper to by reading the respective sections.
21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..
Editorial Workflow
Editorial Workflow
*MANAGEMENT: Our Editor-in-Chief manages this Journal. Receives the articles from IARAS,
checks them, rejects those that are not appropriate and forwards to reviewers whatever he believes that deserves an evaluation via the system of peer review.
Co-Editors-in-Chief have an Advisory Role.
* OWNERSHIP: IARAS Publications Ltd.
Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is single blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and decisions letters of manuscripts are sent within 4 weeks.
The editors of this journal take the responsibility to enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal take such publishing ethics issues very seriously and are trained to proceed in such cases with a zero tolerance policy.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Authors wishing to publish their papers in the Journal are asked to abide to the following rules:
a) Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission.
b) Authors should accurately present their research findings and include an objective discussion of the significance of their findings.
c) Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work.
d) Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication.
f) Simultaneous submission of manuscripts to more than one journal is not tolerated.
Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted).
g) If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken.
h) Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license.
* Plagiarism, data fabrication and image manipulation are not tolerated.
* Plagiarism is not acceptable in IARAS submissions.
* Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source.
Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited.
If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
Acceptance Rate
Acceptance Rate
International Journal of Control Systems and Robotics currently has an acceptance rate of 30%.
Publication Fees
Publication Fees
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader Food and Nutrition Science - An International Journal: Except the fees, IARAS does not have any other source of Revenue. 310 105 EUR /paper until December 31, 2024
will ever have to buy a subscription or pay any pay-per-view fees to access articles in the electronic version of the journal.
There is hence no revenue at IARAS neither from the sale of subscriptions to the electronic version of the journal nor from pay-per-view fees.
Yet, the online publication process does involve costs including those pertaining to setup and maintenance of the publication infrastructure, routine operation of the journal, processing of manuscripts through peer-reviews, editing, publishing, maintaining the scholarly record, and archiving. To cover these costs, the journals depends on Publication Fees. Publication Fees are due when a manuscript has been accepted for publication.310 105 EUR /paper until December 31, 2024
International Journal of Agricultural Science: 310 105 EUR /paper until December 31, 2024
International Journal of Applied Physics: 310 105 EUR /paper until December 31, 2024
International Journal of Biochemistry Research: 310 105 EUR /paper until December 31, 2024
International Journal of Biology and Biomedicine: 310 105 EUR /paper until December 31, 2024
International Journal of Chemistry and Chemical Engineering Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Circuits and Electronics: 310 105 EUR /paper until December 31, 2024
International Journal of Communications: 310 105 EUR /paper until December 31, 2024
International Journal of Computers: 310 105 EUR /paper until December 31, 2024
International Journal of Control Systems and Robotics: 310 105 EUR /paper until December 31, 2024
International Journal of Cultural Heritage: 310 105 EUR /paper until December 31, 2024
International Journal of Economics and Management Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Education and Learning Systems: 310 105 EUR /paper until December 31, 2024
Journal of Electromagnetics: 310 105 EUR /paper until December 31, 2024
International Journal of Environmental Science: 310 105 EUR /paper until December 31, 2024
International Journal of Instrumentation and Measurement: 310 105 EUR /paper until December 31, 2024
International Journal of Internet of Things and Web Services: 310 105 EUR /paper until December 31, 2024
International Journal of Mathematical and Computational Methods: 310 105 EUR /paper until December 31, 2024
International Journal of Mechanical Engineering: 310 105 EUR /paper until December 31, 2024
International Journal of Medical Physiology: 310 105 EUR /paper until December 31, 2024
International Journal of Power Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Renewable Energy Sources: 310 105 EUR /paper until December 31, 2024
International Journal of Signal Processing: 310 105 EUR /paper until December 31, 2024
International Journal of Theoretical and Applied Mechanics: 310 105 EUR /paper until December 31, 2024
International Journal of Tourism: 310 105 EUR /paper until December 31, 2024
International Journal of Transportation Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Veterinary Medicine: 310 105 EUR /paper until December 31, 2024
IARAS does not have subscriptions, does not have advertising revenue, does not sell reprints, and does not have any other institutional or organizational support.
Publishing fees or waiver status should not influence editorial decision making.
Sometimes, excellent papers might be published without fees, especially if the comments from the three Reviewers are that the article does not need corrections and can be published "as it is" or if the authors have special financial difficulties.
IARAS does not have Direct Marketing Activities
Reviewers Acknowledgment
Reviewers Acknowledgment
So far for the "International Journal of Control Systems and Robotics"
we have used the following Reviewers
Ioana Adrian
Abbas Karimi
Andrzej Zak
Valentina E. Balas
Calin Ciufudean
Zengshi Chen
Christos Volos
Chandrasekaran Manoharan
Bahaa Kazem
Vinod D.S.
Dimitrios Ventzas
Aboubekeur Hamdi-Cherif
Eustache Muteba Ayumba
Francesco Zirilli
Mokhtari Fouad
Hassan Elsayed Ahmad Ibrahim
Hime Aguiar
Hamidreza Hoshyarmanesh
Ioan Doroftei
Ismail Saritas
Krishnan Jayaraman
Kavikumar Jacob Kavikumar
Kostantinos Kaloveraktis
Kok Mun Ng
Lungu Mihai Aureliu
Michael H.schwarz
Ankit Patel
Mohd Ashraf Ahmad
Mohamed Zahran
Mostafa Mostafa Abutaleb
Mihai Timis
Mufti Mahmud
Musa Mailah
Albert Alexander
Prof Harry Coomar Shumsher Rughooputh
Rabie A. Ramadan Rabie
Dr. Rakesh K. Arya
Saheeb Ahmed Kayani
Shahram Javadi
Silviu Nastac
Sasikumar Subramanian
Vipul Arvindbhai Shah
Yogesh Kumar
Montri Phothisonothai
Bogdan Zak
Mandana Norouzi
Muhaidheen M
Cheng Yee Low
Prof. Dhaval Vyas
Ruzlaini Ghoni
Roman Prokop
Chintan Modi
Chenwen Zheng
Muhammet Koksal
Mohamed Hussein
Hishamuddin Jamaluddin
Mohamed Ahmed
Mohammad Mehrmohammadi
Krishna Kumar Sharma
Imre J. Rudas
Matteo Nunziati
Saurabh Kwatra
Kenneth Revett
Daniel Amariei
Vasile Cojocaru
Hung-Jen Yang
Jozef Novak-Marcincin
Payam Porkar
Inácio Fonseca
Collin Howe Hing Tang
Rawid Banchuin
Hamid Eghbalpour
Constantin Udriste
Syed Saad Azhar Ali
Bronislav Chramcov
Muhammad Naufal Mansor
Vehbi Neziri
Carlos E. Formigoni
Nikolaos Doukas
K.E.Ch. Vidyasagar
Digital Preservation
IARAS is partnering with Portico to preserve collections from its Digital Archives products. Digital Preservation
IARAS’s Portico participation means that there will be uninterrupted access to the historical content in these collections.
IARAS launched its Digital Archives in 2016 as part of an ongoing initiative to digitize important primary documents of historical source materials used by scholars and students.
EBSCO will be taking part in Portico’s D-Collection Preservation Service which preserves digitized historic collections on behalf of participating publishers.
This service is solely supported by publishers that have committed their collections to the archive and more than 120 d-collections are preserved in Portico today.
Contact Information
Contact Information
*Neofit Rilski 61, Sofia 1000, BULGARIA
Αnnexes: ENSEIRB rue A Schweitzer 33400, Talence, FRANCE Metohiu 45, Nicosia, 1101, CYPRUS
Email: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.
Submit a Manuscript
Submit a Manuscript
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission
Current e-mail addresses must be provided for all suggested reviewers.
Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission
If for some technical reason online submission is not successful, the author can submit the manuscript to This email address is being protected from spambots. You need JavaScript enabled to view it.