Articles
Articles
-
Techno-Economic Design And Integration of Sustainable Hybrid PV/Wind/Diesel Turbine Generation Into The Nigerian Power System
- Information
- Views: 175 hit(s) Pub. Date: 29 December 2023
AUTHOR(S): Simeon Ebahe Okachi, James Eko Akpama, Eunice Ijeoma Ene, Milliscent Ededet Orok, Asibong Icha -
Controlling the Polarization of Segnetoelectrics While Increasing the Specific Power and Specific Energy of the Powertrain to Increase the Idle Speed and Reduce the Charging Time of Electric Vehicles
- Information
- Views: 209 hit(s) Pub. Date: 02 October 2023
AUTHOR(S):V. I. Zubtsov -
Telemetry of Coal Miners Using Smart Jacket
- Information
- Views: 357 hit(s) Pub. Date: 01 August 2023
AUTHOR(S):Vanitha U., Aakaash V. S., Arvinth R. A., Ashwin T., Bhagavathidharshan B. -
Agribot - Multipurpose Agricultural Robot
- Information
- Views: 278 hit(s) Pub. Date: 03 July 2023
AUTHOR(S): P. Sampath Krishna Reddy, G. Jethin Reddy, V. Rohan, K. Vinay Kumar -
Electromagnetic Interference in Printed Circuit Board Design
- Information
- Views: 482 hit(s) Pub. Date: 03 May 2023
AUTHOR(S):Sena Yildiz, Ozlem Coskun -
Designing and Simulating AND Logic Gate with a Simple and Symmetrical Structure
- Information
- Views: 435 hit(s) Pub. Date: 23 December 2022
AUTHOR(S): Mehdi Rezaeenia, Fariborz Parandin -
Tool HLCCAD for Blended Learning the Fundamentals of Digital Electronics
- Information
- Views: 472 hit(s) Pub. Date: 02 December 2022
AUTHOR(S): M. S. Dolinsky -
MPPT Based on a Novel Multi-swarm PSO with Factor Selection Strategy for PV Applications
- Information
- Views: 421 hit(s) Pub. Date: 07 October 2022
AUTHOR(S):Chiheb Ben Regaya , Mahbouba Brahmi, Hichem Hamdi, Abderrahmen Zaafouri -
Optimization of Electronic Automobile Urgent Cabin Climate Control System (EAUCCCS)
- Information
- Views: 399 hit(s) Pub. Date: 06 October 2022
AUTHOR(S):Suleiman Q. Abu-Ein -
A Design and Analysis of Op Amp Twin-T Band Reject Notch Filter
- Information
- Views: 609 hit(s) Pub. Date: 29 June 2022
AUTHOR(S):Ananda M, Kalpana A. B. -
Design and Simulation of an All Optical Two Channel Filter Based on Photonic Crystals
- Information
- Views: 525 hit(s) Pub. Date: 20 June 2022
AUTHOR(S):Naser Mahtabi, Farsad Heidari, Mehdi Rezaeenia -
Electrical Parameter Optimization for a Battery Electric Vehicle
- Information
- Views: 521 hit(s) Pub. Date: 05 May 2022
AUTHOR(S):Rakshitha R, Usha Surendra -
Comparison Analysis between Various Boost Chopper Configurations
- Information
- Views: 520 hit(s) Pub. Date: 08 February 2022
AUTHOR(S):Abdel-Karim Daud, Sameer Khader -
Analysis of Wind Driven Doubly Fed Induction Generator under Transient Conditions
- Information
- Views: 590 hit(s) Pub. Date: 28 December 2021
AUTHOR(S):Milkias Berhanu Tuka, Salem Molla Endale -
Two-threshold ON/OFF thyristors, switchable by the input signal level
- Information
- Views: 738 hit(s) Pub. Date: 09 December 2021
AUTHOR(S):M. A. Shustov -
Improving the Efficiency of Electric Transport Drives by Controlling the Polarization of Segmentelectrics
- Information
- Views: 559 hit(s) Pub. Date: 31 October 2021
AUTHOR(S):V. I. Zubtsov, Е. V. Zubtsova -
Design of Secure Image Cipher for Cryptographic Applications
- Information
- Views: 612 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):Vinaya Dhavalagi -
Analysis of Silicon Mach Zehnder Modulator with Plus-Shaped PN Junction Phase Shifter design for Data Centre Applications
- Information
- Views: 520 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):R. G. Jesuwanth Sugesh, A. Sivasubramanian -
Grayscale Image Authentication with Data Repair Capability
- Information
- Views: 584 hit(s) Pub. Date: 21 September 2021
AUTHOR(S):Arjun Nichal, Bhalchandra Godbole -
Chip 222 - Alternative 555. PWM Generator With Independent Frequency Control
- Information
- Views: 1346 hit(s) Pub. Date: 06 September 2021
AUTHOR(S): M. A. Shustov -
Implementation of DWT and Regression Learning Based ANN for Forecast of Solar PV Output
- Information
- Views: 677 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Jyotsana Pandey, Aaditya Khare -
Performance Analysis of Utility Scale Photovoltaic Systems Integrated into an Islanded Nigeria Electric Power Grid
- Information
- Views: 625 hit(s) Pub. Date: 10 May 2021
AUTHOR(S):S. I. Ibuodinma, O. J. Onojo, L. O Uzoechi -
New Non-Invasive Hardware and Software Ingetrated Method to Diagnose Motors Fautls Via Remote Access
- Information
- Views: 700 hit(s) Pub. Date: 18 February 2021
AUTHOR(S):Muhammad Aman Sheikh, Sheikh Tahir Bakhsh, Muhammad Tahir, M.irfan -
Linearization Techniques to Overcome Nonlinear Effects of RF Power Amplifier in Mobile Communication
- Information
- Views: 720 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Puneeth S., Rangaraju H. G. -
RHBD Charge Pump PLL based 2.4 GHz Frequency Synthesizer
- Information
- Views: 890 hit(s) Pub. Date: 23 December 2020
AUTHOR(S):Varsha Prasad, S. Sandya -
Performance Evaluation of Ethernet for Supporting the Vehicle Body and the Multimedia Domains ant its comparison to FlexRay Bus
- Information
- Views: 761 hit(s) Pub. Date: 26 November 2020
AUTHOR(S):Azer Hasnaoui, Ikbel Mejri, Manel Takrouni, Tahar Ezzeddine, Salem Hasnaoui -
Electronic Device Design for Energy Harvesting of Indoor and Outdoor Light Sources for Multiple Low Power Usage
- Information
- Views: 1015 hit(s) Pub. Date: 13 July 2020
AUTHOR(S): Stelios Kouridakis, Panagiotis Giakoumakis -
Survey About the Data Acquisition System Used for Cryogenic Process With Configuration of the Simulation System in LabVIEW Software
- Information
- Views: 970 hit(s) Pub. Date: 13 July 2020
AUTHOR(S): Carmen Maria Moraru, Iuliana Stefan, Ciprian Bucur, Ovidiu Balteanu -
Neural Network Based State Observer with Unknown Terms for Actuator Fault Approximation
- Information
- Views: 980 hit(s) Pub. Date: 09 July 2020
AUTHOR(S):Satish Gummadi Saalma -
Robust Integral Terminal Sliding Mode Control for Quadrotor UAV with External Disturbances
- Information
- Views: 961 hit(s) Pub. Date: 14 May 2020
AUTHOR(S):Moussa Labbadi, Mohamed Cherkaoui -
Simulation and Optimization of High Power IMPATT Diodes
- Information
- Views: 992 hit(s) Pub. Date: 10 April 2020
AUTHOR(S):Alexander Zemliak, Fernando Reyes, Eugene Machusky -
Testability Analysis and its Application to Hardware Security
- Information
- Views: 1094 hit(s) Pub. Date: 23 March 2020
AUTHOR(S):Sreeja Rajendran, Mary Lourde R -
Improving Input Tracking and Noise Reduction of Buck/boost DC-DC Converter Using Adaptive Feedforward and Feedback Controllers
- Information
- Views: 1117 hit(s) Pub. Date: 18 December 2019
AUTHOR(S): Ali I Hamad, Mohammad A Obeidat -
A TG based 2-Stage High Frequency Rectifier with Current Booster Designed Using 45nm CMOS process for Low Power RF Energy Harvesting Application
- Information
- Views: 1192 hit(s) Pub. Date: 02 December 2019
AUTHOR(S):Manash Pratim Sarma, Kandarpa Kumar Sarma -
Modelling and Analysis Systems in State Space
- Information
- Views: 1312 hit(s) Pub. Date: 23 August 2019
AUTHOR(S):Corneliu Buzduga, Calin Ciufudean, Vlad Valentin -
Robust H8 State Feedback plus State-Derivative Feedback Controller Design for Uncertain T-S Fuzzy Systems
- Information
- Views: 1402 hit(s) Pub. Date: 18 December 2018
AUTHOR(S):Santi Ruangsang, Wudhichai Assawinchaichote -
Spatial Gesture Interaction System
- Information
- Views: 1440 hit(s) Pub. Date: 23 May 2018
AUTHOR(S): Yang-Keun Ahn, Kwang-Soon Choi, Young-Choong Park -
Multi-Sensor Real-Time Motion Tracking System
- Information
- Views: 1598 hit(s) Pub. Date: 23 May 2018
AUTHOR(S): Yang-Keun Ahn, Kwang-Soon Choi, Young-Choong Park -
Design and Simulation of low actuation voltage Cantilever RF MEMS switches suitable for Reconfigurable antenna applications
- Information
- Views: 1741 hit(s) Pub. Date: 12 April 2018
AUTHOR(S): Raji George, C.R.S Kumar, S.A Gangal -
Highly Efficient step-up Boost-Flyback Coupled Magnetic Integrated Converter for Photovoltaic Energy
- Information
- Views: 1848 hit(s) Pub. Date: 29 March 2018
AUTHOR(S): Vu Thai Giang, Vo Thanh Vinh, Nguyen The Vinh -
Comparison of D Flip-Flops Using Variability and Delay Analysis for Sigma Delta ADC
- Information
- Views: 1945 hit(s) Pub. Date: 19 January 2018
AUTHOR(S): Yogita Gajare, Arti Khaparde -
Electronic Circuit Design For Ensuring Safety Of Business in Band Systems
- Information
- Views: 1731 hit(s) Pub. Date: 11 January 2018
AUTHOR(S): Onur Ari, Ozlem Cosku, Adnan Kaya -
Realization of sinusoidal oscillators using operational Transresistance Amplifier (OTRA)
- Information
- Views: 1716 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Chandra Shaker Pittala, Srinivasulu Avireni -
CMOS Customization of Comparator
- Information
- Views: 1823 hit(s) Pub. Date: 20 December 2017
AUTHOR(S): Umesh Kumar, Ashish Mishra -
Electronic Navigational Chart in Aid of Generation of Multi-Dimensional Radar Display
- Information
- Views: 1660 hit(s) Pub. Date: 12 December 2017
AUTHOR(S): Mariusz Waz, Krzysztof Naus -
IoT Based Oyster Output Management System
- Information
- Views: 1812 hit(s) Pub. Date: 08 December 2017
AUTHOR(S): Yeong-Yil Yang, Young-Ho Choi, Young-Sik Park, Jong-Cheol Lee -
Comparison of Different Strategies for Analog Circuit Optimization
- Information
- Views: 1676 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Alexander Zemliak, Evgeny Machussky -
Application of Maximum Principle for Time Minimization of Circuit Design Process
- Information
- Views: 1612 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Alexander Zemliak -
Study of Different Optimization Strategies on Basis of Lyapunov Function
- Information
- Views: 1629 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Alexander Zemliak, Fernando Reyes -
Approach to Estimate the Parameters of the Melded Cast-Iron Conveyance within the Electromagnetic Pumps
- Information
- Views: 1694 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Ioan Enescu -
Neuromorphic Convolutional Recurrent Neural Network for Road Safety or Safety Near the Road
- Information
- Views: 1715 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Woo-Sup Han, Il Song Han -
A BLDC Controller Based on Dedicated System-In-Package
- Information
- Views: 2154 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Florin Ravigan, Niculae Boteanu, Marius Dumitriu, Ionut Zglimbea -
An FPGA Implementation of an LMS Self-Adjusting Adaptive Noise Cancellation System for Audio Processing
- Information
- Views: 1938 hit(s) Pub. Date: 30 August 2017
AUTHOR(S): Nian Zhang, Tam Le, Sasan Haghani -
Optimal Control for Energy Harvesting: Electrical Model and Measurements
- Information
- Views: 1589 hit(s) Pub. Date: 21 June 2017
AUTHOR(S): Andrés García, Luciano Pons -
Methods and Techniques Used in Industrial Engineering to Solve Typical Issues
- Information
- Views: 1872 hit(s) Pub. Date: 21 June 2017
AUTHOR(S): Ioan Ghimbaseanu -
Design and Evaluation of a Single-Phase Modular Multilevel Inverter
- Information
- Views: 1878 hit(s) Pub. Date: 21 June 2017
AUTHOR(S): Jose Araque Gallardo, Jorge Luis Diaz, Aldo Pardo -
Particle Swarm Optimization to Minimize THD in Multilevel Inverters
- Information
- Views: 1523 hit(s) Pub. Date: 21 June 2017
AUTHOR(S): Jose Araque Gallardo, Jorge Luis Diaz, Aldo Pardo -
Strategies for Reducing Crosstalk in CNT Interconnects
- Information
- Views: 1774 hit(s) Pub. Date: 07 March 2017
AUTHOR(S): P. S. Mallick, P. Uma Sathyakam -
Studies for the More Effective Protection of MV/LV Substations against Lightning Overvoltages
- Information
- Views: 1735 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Christos A. Christodoulou, Vasiliki Vita, Lambros Ekonomou -
Terahertz Responsivity Calculation of Unipolar Diodes Based on Transistor Channels Model
- Information
- Views: 1799 hit(s) Pub. Date: 24 January 2017
AUTHOR(S): Abdel Majid. Mammeri, F. Z. Mahi, H. Marinchio, C. Palermo, L. Varani -
Diagnosis of Rotor Failures Current Power Induction Motors by Spectral Analysis Methods
- Information
- Views: 1906 hit(s) Pub. Date: 13 December 2016
AUTHOR(S): Alicia Tinnirello, Eduardo Gago, Lucas D’ Alessandro, Paola Szekieta -
FPGA Based Implementation of Distributed Minority and Majority Voting Based Redundancy for Mission and Safety-Critical Applications
- Information
- Views: 1684 hit(s) Pub. Date: 28 November 2016
AUTHOR(S): P. Balasubramanian, Nikos Mastorakis -
Performance Analysis of 20 nm Pentagonal and Trapezoidal NanoWire Transistor with Si and Ge Channel
- Information
- Views: 1821 hit(s) Pub. Date: 24 October 2016
AUTHOR(S): Sandeep Singh Gill, Jaidev Kaushik, Navneet Kaur -
Aspects Concerning the Speed Control of Low Power Induction Motors Used for Medical Equipment
- Information
- Views: 1749 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Ion Vlad, Sorin Enache, Monica A. Enache, Ionut D. Smarandescu -
Investigating Negative Capacitance Shunt Circuit for Broadband Vibration Damping and Utilizing ACO for Optimization
- Information
- Views: 2044 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Azni N. Wahid, Asan G. A. Muthalif, Khairul A. M. Nor -
Fuzzy Controller for Adjust the Indoor Temperature and Preservation the Buildings
- Information
- Views: 1833 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Daniel Popescu, Calin Ciufudean -
Design & Material Characterization for 3D Printing Sensor
- Information
- Views: 1953 hit(s) Pub. Date: 20 September 2016
AUTHOR(S): Kavya, Arivarasi A., Anand Kumar R., Jegatha Nambi Krishnan -
Modelling and 3D printing of Packaging for Water Quality Sensor
- Information
- Views: 1876 hit(s) Pub. Date: 20 September 2016
AUTHOR(S): Shibani Nasser, Arivarasi A., Kapil Bansal, Anand Kumar R. -
Detection of Counterfeit Electrolytic Capacitors in Power Electrical Systems
- Information
- Views: 1838 hit(s) Pub. Date: 20 September 2016
AUTHOR(S): Michal Frivaldsky, Andrej Kanovsky, Pavol Spanik -
Development of an Affordable Automated Guided Cart for Material Handling Tasks
- Information
- Views: 1847 hit(s) Pub. Date: 20 September 2016
AUTHOR(S): T. P. Ferreira, I. A. Gorlach -
The Text Input System Using Spatial Fingertip Tracking Method
- Information
- Views: 1825 hit(s) Pub. Date: 20 September 2016
AUTHOR(S): Yang-Keun Ahn, Kwang-Soon Choi, Young-Choong Park -
Fast Overlapped Block Motion Estimation for Frame Rate Up Conversion
- Information
- Views: 1908 hit(s) Pub. Date: 17 August 2016
AUTHOR(S): Yonghoon Kim, Jechang Jeong -
Semiconductor Component Genuineness Evaluation Methods
- Information
- Views: 1746 hit(s) Pub. Date: 17 August 2016
AUTHOR(S): Neumann Petr, Houser Josef, Navratil Milan, Kresalek Vojtech, Adamek Milan -
Line Voltages THD Optimization on a Multilevel Inverter for PV Systems
- Information
- Views: 1816 hit(s) Pub. Date: 17 August 2016
AUTHOR(S): Luis David Pabon, Jorge Luis Diaz Rodriguez, Aldo Pardo Garcia -
Platform for The Research Of Energy Quality in Cascaded Multilevel Power Converters
- Information
- Views: 1828 hit(s) Pub. Date: 17 August 2016
AUTHOR(S): Luis David Pabon, Edison Andres Caicedo, Jorge Luis Diaz Rodriguez, Aldo Pardo Garcia -
Sapphire Laser Doped with Ti:Al2O3 Titanium Ions Shaped with the Advanced Multi-Criteria Analysis
- Information
- Views: 1839 hit(s) Pub. Date: 08 July 2016
AUTHOR(S):Girdu Constantin Cristinel, Buzatu Constantin -
Rapid Prototyping for Optimal Control of Electrical Drives
- Information
- Views: 2081 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Lorand Bogdanffy, Emil Pop, Ionut-Alin Popa -
Direct Power Control with Space Vector Modulation and Fuzzy DC- Voltage Control- PWM Rectifier
- Information
- Views: 2023 hit(s) Pub. Date: 31 May 2016
AUTHOR(S):H. Denoun, A. Fekik, N. Benamrouche. N. Benyahia, M. Zaouia, A. Badji -
Study on Analogical Reasoning Methodologies For Developing Analogical Learning Systems
- Information
- Views: 1917 hit(s) Pub. Date: 17 March 2016
AUTHOR(S): Abdel-Badeeh M. Salem, Mohamed Gawish -
Impact of the Horizontal and Vertical Electromagnetic Waves on Oscillations of the Surface of Horizontal Plane Film Flow
- Information
- Views: 1863 hit(s) Pub. Date: 17 March 2016
AUTHOR(S): Ivan V. Kazachkov -
The Usage of Machine Learning Paradigms on Protein Secondary Structure Prediction
- Information
- Views: 2053 hit(s) Pub. Date: 17 March 2016
AUTHOR(S): Hanan Hendy, Wael Khalifa, Mohamed Roushdy, Abdel-Badeeh M. Salem -
Electromagnetic Analysis of a Dielectric Rod Loaded by Metasurface
- Information
- Views: 1890 hit(s) Pub. Date: 16 March 2016
AUTHOR(S): A. M. Saleh, K. R. Mahmoud, I. I. Ibrahim, A. M. Attiya -
Segment-Based Task Scheduling for Thermal Optimization of Stacked Memory Architecture
- Information
- Views: 2176 hit(s) Pub. Date: 12 February 2016
AUTHOR(S): Wei-Kai Cheng, Ting-Wei Hsu, Ruey-Yeu Wang -
A High Performance D-Flip Flop Design with Low Power Clocking System using MTCMOS Technique
- Information
- Views: 2484 hit(s) Pub. Date: 12 February 2016
AUTHOR(S): Paanshul Dobriyal, Karna Sharma, Manan Sethi, Geetanjali Sharma -
NBI Suppression in Non-Linear UWB Channels using Second Order CPP-ANF
- Information
- Views: 2240 hit(s) Pub. Date: 12 February 2016
AUTHOR(S): Farhana Begum, Manash Pratim Sarma, Kandarpa Kumar Sarma -
Input Current Shaping of Single Phase Matrix Converter by Designing lc Filter With Closed Loop Technique
- Information
- Views: 2208 hit(s) Pub. Date: 12 February 2016
AUTHOR(S): Byamakesh Nayak, Rupa Mishra -
A Fully Optimized Ultra Wideband Mixer in 65nm CMOS Technology
- Information
- Views: 2174 hit(s) Pub. Date: 12 February 2016
AUTHOR(S): Rajesh Khatri, D. K. Mishra
Editorial Board
Editor-in-Chief
Prof. Kandarpa Kumar Sarma, Department of Electronics and Communication Technology, Gauhati University, Guwahati-781014, Assam, India
Members of the Editorial Board
Prof. Pierre Borne, IEEE France Section Chair, IEEE Fellow, Ec Centr de Lille, France
Prof. James Lam, IEEE Fellow, IET Fellow, IMA Fellow, The University of Hong Kong, Hong Kong
Prof. Bimal Kumar Bose (Life Fellow IEEE), The University of Tennessee, Knoxville, USA
Prof. Narsingh Deo, IEEE Fellow, ACM Fellow, AAAS Fellow, ICA Fellow, Orlando, Florida, USA
Prof. Wasfy B. Mikhael, IEEE Fellow, Vice President IEEE Circuits and Systems, University of Central Florida, Orlando, USA
Prof. Yuriy S. Shmaliy, IEEE Fellow, Universidad de Guanajuato, Mexico.
Prof. Theodore B. Trafalis, University of Oklahoma, USA
Prof. Kamisetty Rao, IEEE Fellow, University of Texas at Arlington, USA
Prof. D. Subbaram Naidu, IEEE Fellow, Idaho State University, USA
Prof. Tadeusz Kaczorek, IEEE Fellow, Warsaw University of Technology, Poland
Prof. Demetri Terzopoulos, IEEE Fellow, ACM Fellow, University of California, Los Angeles
Prof. Nikos Mastorakis, Technical University of Sofia, Bulgaria
Prof. Georgios B. Giannakis, IEEE Fellow, University of Minnesota, USA
Prof. Abraham Bers, IEEE Fellow, MIT, USA
Prof. Nikolaos G. Bourbakis, IEEE Fellow, Wright State University, USA
Prof. Lei Xu, IEEE Fellow, Chinese University of Hong Kong, Hong Kong
Prof. Sidney Burrus, IEEE Fellow, Rice University, USA
Prof. Biswa N. Datta, IEEE Fellow, Northern Illinois University, USA
Prof. Jiri Hrebicek, Masaryk University, Brno, Czech Republic
Prof. Panagiotis Agathoklis, University of Victoria, British Columbia, Canada
Prof. Ryszard S. Choras, University of Technology & Life Sciences, Bydgoszcz, Poland
Prof. Athanassios Manikas, Imperial College, University of London, UK
Prof. Valeri Mladenov, Technical University of Sofia, Bulgaria
Prof. Imre Rudas, Obuda University, Budapest, Hungary
Prof. Vladimir Vasek, Tomas Bata University, Zlin, Czech Republic
Aims and Scope
Aims and Scope
The International Journal of Circuits and Electronics is an open access journal. The goal of this journal is to provide a platform for academicians, researchers and practitioners all over the world to promote, share, and discuss various new issues and developments in all areas of Circuits and Electronics. Manuscripts are subject to a rigorous and fair peer-review process. Accepted papers will appear online within 3-4 weeks after their submission. The journal publishes papers including but not limited to the following topics:
Fundamental Theory, Network Theory and Applications, Nanostructures and nanotechnologies, Molecular Electronics, Molecular Computing, DNA Computing, Circuits and Networks inspired from Biology, Microelectronics, Microcircuits, Analog, Digital, Mixed-Mode Circuits, Electronics: Components, Devices, Systems, Silicon Devices: Technology, Modeling, Reliability, Optoelectronic Devices, Laser and Optical Systems, Thin Film Technologies, Very Large Scale Integration Systems (VLSI), Hardware/Software Codesign Very Large Scale Integration Systems (VLSI), Digital Filters, High Level Synthesis, Amplifiers, Nonlinear Circuits, Sensors, Physical Design, Time-Frequency and Wavelet Applications, Modelling and Simulation, CAD Tools, Circuits and Electronics for Data Conversion and S-D Modulation, Prototype Devices and Measurement, Circuits and Systems for Control and Robotics, Electron Devices for Power Technology, High Voltages and Electric Machines, Device Physics, Physical Design, High-Level Synthesis and Testing, Non-Linear Circuits, Formal Verification, Semiconductors, Superconductivity Circuits, Computer-Aided Design, Instrumentation, Instrument-Computer Interface, Military Electronics, Electronics for Space exploration, Consumer Electronics, Circuits in Power Technology, Electron Devices for Video Technology, Circuits for Antennas Technology, Electron Devices and Systems for Radar and Sonar Systems, Circuit Models, Electrical and Electronic Measurement, Circuits for Industrial Applications, Circuit models for Electromagnetic Fields, Electronics for Signal Processing and other Applications, Neural Networks, Numerical Analysis and Circuits, Logic Synthesis, Automatic Control, Robotics, Dynamical Systems, Stochastic Systems, Simulation, Neural Networks, Fuzzy Systems, Evolutionary Computation, Fuzzy Logic and Circuits Design, Circuit Implementation for Fuzzy Systems, Multidimensional Circuits and Systems, Circuit Modelling and Scientific Computing with Applications in Science and Engineering. Systems Theory, Dynamical Systems, Control Systems, Control Engineering, Soft Computing, Simulation, Modelling, Robotics, Artificial Intelligence, Fuzzy Systems, Neural Networks, Genetic Algorithms, Knowledge Modelling, Decision Support Systems, Hierarchical Control Systems, Aerospace Systems, Lightwave Engineering, Stochastic Systems, Non-linear Systems, Telecommunication Systems, Information Systems, Multivariable systems, Hybrid Systems, Multirate Systems, Speech and Image Processing Systems, Discrete Event Dynamic Systems, Manufacturing Systems, Decentralised Systems, Remote Sensing, Microelectromechanical Systems. Human-Machine Systems, Image compression. Scientific visualization. Applications and Special Topics. Mathematical Theory of Control, Stability, Observability, Controlability, Factorizability, Reachability. Linear Control, Non-Linear Control. Optimal Control, Robust Control. Computational Intelligence. Neural Control, Fuzzy Control, Genetic Control, Hybrid (Neural-Fuzzy-Evolutionary) Methodologies, Intelligent Control, Stochastic Control, Discrete Control, Hierarchical Control, Large Scale Systems, Adaptive Control. Predictive Control, Process Control, H-infinity Control. Multivariable Control, Multidimensional Control, Multivariable Systems, Discrete Event Systems. Re-configurable Systems, Real-Time Control. Industrial Control, Control for Electric Machines. Control for Power Systems, Fault Detection. Simulation, Optimization, Identification. Estimation, Kalman Filtering, Robotics. Robotic Networks, Mechatronics, Artificial Intelligence, Circuits, Devices and Systems for Automation and Control. Electronics for Control, Electrical and Electronic Measurement, Signal Processing for Control, Human-Machine Systems and Cybernetics. Modeling and Simulation, Computer Networks for Control, Internet Control, Microprocessors, Computer Architecture for Control. Software tools for Control, CAD/CAM systems, Applications and Special Topics, Others.
Special Issues
Special Issues
1. Open Special Issues
At the moment we have no open Special Issue
2. Special Issue Guidelines: Every proposal for special issue must be sent to us and should include the following
The journal for which the Special Issue is intended
* A suggested title for the Special Issue
* Proposed Aims and Scope
* A list of Guest Editors who will join the Lead Guest Editor in managing the Special Issue, including their names, emails, affiliations, and a short biography (one paragraph) of each of the Guest Editors
* A proposed timeline and schedule which includes:
* Deadline for submission (6 months from the initial Call-for-Papers)
* First round of review (3 months after submission deadline)
* Tentative publication date (3 months after the first round of review)
All proposals are subject to approval by the journal following a discussion of the proposed Special Issue among the journals Editorial Board. If approved, a Call-for-Papers for the Special Issue will be issued and posted online.
Each proposal will be evaluated by three independent experts according to the following Criteria
* Relevance to the Journal
* Scientific - Technical Originality,
* Scientific content And advances beyond the State-Of-The-Art
* Potential Impact and tnterest for the readers
The Guest Editors cannot act as reviewers for the Special Issues manuscripts. This is to ensure a high-quality, fair, and unbiased peer-review process of every manuscript submitted to the journal, since any manuscript must be recommended by one or more (usually two or more) external reviewers and the Guest Editor before acceptance for publication.
The name of the Guest Editor recommending the manuscript for publication is published with the manuscript to indicate and acknowledge their invaluable contribution to the peer-review process and the indispensability of their contributions to the running of the journals.
The peer-review process is single blinded; that is, the reviewers know who the authors of the manuscript are, but the authors do not have access to the information of who the peer reviewers are. Every journal published by Hindawi has an acknowledgment page for the researchers who have performed the peer-review process for at least one manuscript in the past year. Without the significant contributions made by these researchers, the publication of the journal would not be possible.
3. Published Special Issues
At the moment we have no open Special Issue
Time for Publication
Time for Publication
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
Indexes
Indexes
Web of Science (Clarivate Analytics)
There are 455 citations for articles published in this journal, which increase by 39% compared to citations as of December 2021.
Google Scholar
There are 1961 citations for articles published in this Journal as of December 2023 based on the statistics from Google Scholar.
The 2-year Google-based Journal Impact Factor (2-GJIF) is 1.52.
This journal is indexed by the following indexes - databases:
Index Copernicus
Cosmos Impactfactors
Google Scholar
International Institute Of Organized Research (I2OR)
ROAD
Polish Scholarly Bibliography (PBN)
Research Bible
JURN
Scientific Indexing Services (SIS)
Eurasian Scientific Journal Index
EBSCO
Academic Journals Database
AiritiLibrary
Autoritetslister for serier og forlag
Base Search
CALIS
ChaoXing Periodicals
Chemical Abstracts Service (CAS)
Citefactor
CNKI SCHOLAR
Cnplinker
COPAC
CQVIP
DTU Findit
Elektronische Zeitschriftenbibliothek(EZB)
GETIT@YALE(Yale University Library)
Harvard Library E-Journals
Infotrieve
i-Scholar
JournalSeek
JournalTOCs
MIAR
National Science and Technology Library(NSTL)
National Science Library, Chinese Academy of Sciences (NSLC)
Open Access Journals Search Engine(OAJSE)
Open Access Library
Open J-Gate
PUBDB DESY Publication Database
Research Bible
ResearchGate
SciFinder
SciLit
SHERPA/RoMEO
Stanford University Libraries
Système Universitaire de Documentation (Sudoc)
Technische Informationsbibliothek (TIB)
The Library of Congress
Ulrich’s Periodicals Directory
WanFang
World Journal Clout Index (2021 STM)
Worldcat
Zeitschriftendatenbank (ZDB)
Review Process
Review Process
IARAS sends each paper to 3 independent reviewers, experts in the area of the paper. So, each paper will be evaluated by three independent experts according to the following Criteria
1) Relevance to the Journal
2) Scientific - Technical Originality, Potential Impact and Interest for the audience
3) Scientific/Technical Content and Advances beyond The State-Of-The-Art
4) Quality of the Presentation, clarity of the Content
5) Comments for the authors
The reviewers are going to indicate their familiarity with the paper's subject, evaluate the paper along the aforementioned criteria. Finally, the Editor-in-Chief or a Member of the Editorial Board will decide whether a paper will be accepted or not.
Our Score System will classify the papers as follows
* Publish as it is
* Consider after Minor Changes
* Consider after Major Changes
* Reject
If the Editor recommends Publish as it is the manuscript will undergo a final check by the journals editorial office in order to ensure that the manuscript and its review process adhere to the journals guidelines and policies. Once this is done, the authors will be notified of the manuscripts acceptance, and the manuscript will appear in the Articles in Press section of the journals website.
If the Editor recommends Consider after Minor Changes, the authors are notified to prepare and submit a final copy of their manuscript with the required minor changes suggested by the reviewers. The Editor reviews the revised manuscript after the minor changes have been made by the authors. Once the Editor is satisfied with the final manuscript, the manuscript can be accepted.
If the Editor recommends Consider after Major Changes, the recommendation is communicated to the authors. The authors are expected to revise their manuscripts in accordance with the changes recommended by the reviewers and to submit their revised manuscript in a timely manner. Once the revised manuscript is submitted, the Editor can then make an editorial recommendation which can be Publish Unaltered, Consider after Minor Changes, or Reject.
If the Editor recommends rejecting the manuscript, the rejection is immediate. Also, if the majority of the reviewers recommend rejecting the manuscript, the rejection is immediate.
All journals published by IARAS are committed to publishing only original material, i.e., material that has neither been published elsewhere, nor is under review elsewhere. IARAS as a participant of CrossCheck uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. Manuscripts that are found to have been plagiarized from a manuscript by other authors, whether published or unpublished, will incur plagiarism sanctions.
Publication Ethics and Publication Malpractice Statement
Publication Ethics and Publication Malpractice Statement
STATEMENT: IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct. ΙARAS follows strictly these GUIDELINES ON GOOD PUBLICATION PRACTICE (from COPE): https://publicationethics.org/files/u7141/1999pdf13.pdf The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow") 1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals. 19). All sources of financial support for the project should be disclosed. 21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..Terms of Collaboration
2). After the Review process is completed by the Assoc. Editor and the Reviewers, it is no longer allowed for the authors to withdraw their paper.
3). PEER REVIEW: All submitted papers are subject to strict peer-review process by at least three international reviewers that are experts in the area of the particular paper. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. The possible decisions include acceptance, acceptance with revisions, or rejection.
4). If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted.
5). Rejected articles will not be re-reviewed.
6). Articles may be rejected without review if they are obviously not suitable for publication.
7). The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism.
8). The reviewers evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.
9). The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
10). Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.
11). Peer review assists the publisher in making editorial decisions and through the editorial communications with the experts form the scientific board ant the author may also assist the author in improving the paper.
12). Manuscripts received for review are treated as confidential documents and are reviewed by anonymous staff.
13). A reviewer should also call to the publisher's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.
14). Authors of contributions and studies research should present an accurate account of the work performed as well as an objective discussion of its significance.
15). A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable.
16). The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
17). Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
18). Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
20). Authors should make themselves aware of the paper processing charges and registration fees of the publication they submit a paper to by reading the respective sections.
Editorial Workflow
Editorial Workflow
*MANAGEMENT: Our Editor-in-Chief manages this Journal. Receives the articles from IARAS,
checks them, rejects those that are not appropriate and forwards to reviewers whatever he believes that deserves an evaluation via the system of peer review.
Co-Editors-in-Chief have an Advisory Role.
* OWNERSHIP: IARAS Publications Ltd.Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is single blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and decisions letters of manuscripts are sent within 4 weeks.
The editors of this journal take the responsibility to enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal take such publishing ethics issues very seriously and are trained to proceed in such cases with a zero tolerance policy.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Authors wishing to publish their papers in the Journal are asked to abide to the following rules:
a) Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission.
b) Authors should accurately present their research findings and include an objective discussion of the significance of their findings.
c) Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work.
d) Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication.
f) Simultaneous submission of manuscripts to more than one journal is not tolerated.
Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted).
g) If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken.
h) Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license.
* Plagiarism, data fabrication and image manipulation are not tolerated.
* Plagiarism is not acceptable in IARAS submissions.
* Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source.
Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited.
If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
Acceptance Rate
Acceptance Rate
International Journal of Circuits and Electronics currently has an acceptance rate of 26%.
Publication Fees
Publication Fees
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader Food and Nutrition Science - An International Journal: Except the fees, IARAS does not have any other source of Revenue. 310 105 EUR /paper until December 31, 2024
will ever have to buy a subscription or pay any pay-per-view fees to access articles in the electronic version of the journal.
There is hence no revenue at IARAS neither from the sale of subscriptions to the electronic version of the journal nor from pay-per-view fees.
Yet, the online publication process does involve costs including those pertaining to setup and maintenance of the publication infrastructure, routine operation of the journal, processing of manuscripts through peer-reviews, editing, publishing, maintaining the scholarly record, and archiving. To cover these costs, the journals depends on Publication Fees. Publication Fees are due when a manuscript has been accepted for publication.310 105 EUR /paper until December 31, 2024
International Journal of Agricultural Science: 310 105 EUR /paper until December 31, 2024
International Journal of Applied Physics: 310 105 EUR /paper until December 31, 2024
International Journal of Biochemistry Research: 310 105 EUR /paper until December 31, 2024
International Journal of Biology and Biomedicine: 310 105 EUR /paper until December 31, 2024
International Journal of Chemistry and Chemical Engineering Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Circuits and Electronics: 310 105 EUR /paper until December 31, 2024
International Journal of Communications: 310 105 EUR /paper until December 31, 2024
International Journal of Computers: 310 105 EUR /paper until December 31, 2024
International Journal of Control Systems and Robotics: 310 105 EUR /paper until December 31, 2024
International Journal of Cultural Heritage: 310 105 EUR /paper until December 31, 2024
International Journal of Economics and Management Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Education and Learning Systems: 310 105 EUR /paper until December 31, 2024
Journal of Electromagnetics: 310 105 EUR /paper until December 31, 2024
International Journal of Environmental Science: 310 105 EUR /paper until December 31, 2024
International Journal of Instrumentation and Measurement: 310 105 EUR /paper until December 31, 2024
International Journal of Internet of Things and Web Services: 310 105 EUR /paper until December 31, 2024
International Journal of Mathematical and Computational Methods: 310 105 EUR /paper until December 31, 2024
International Journal of Mechanical Engineering: 310 105 EUR /paper until December 31, 2024
International Journal of Medical Physiology: 310 105 EUR /paper until December 31, 2024
International Journal of Power Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Renewable Energy Sources: 310 105 EUR /paper until December 31, 2024
International Journal of Signal Processing: 310 105 EUR /paper until December 31, 2024
International Journal of Theoretical and Applied Mechanics: 310 105 EUR /paper until December 31, 2024
International Journal of Tourism: 310 105 EUR /paper until December 31, 2024
International Journal of Transportation Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Veterinary Medicine: 310 105 EUR /paper until December 31, 2024
IARAS does not have subscriptions, does not have advertising revenue, does not sell reprints, and does not have any other institutional or organizational support.
Publishing fees or waiver status should not influence editorial decision making.
Sometimes, excellent papers might be published without fees, especially if the comments from the three Reviewers are that the article does not need corrections and can be published "as it is" or if the authors have special financial difficulties.
IARAS does not have Direct Marketing Activities
Reviewers Acknowledgment
Reviewers Acknowledgment
So far for the "International Journal of Circuits and Electronics"
we have used the following Reviewers
Adamou-Mitiche Amel Baha Houda
Mohammad Al-Amri
Alexander N. Pisarchik
Baburao Kodavati Baburao Kodavati
Boja Catalin
Cristian Fosalau
Chandrasekaran Subramaniam
Zengshi Chen
Christos Volos
Petr Cika
Carlos Manuel Travieso-gonzález
Dheeraj Joshi
Diariy R. Sulaiman
Vinod D.s.
Arjuna Marzuki
Kei Eguchi
Ragab Abdulaziz El Sehiemy
Francesco Zirilli
Farhad Mehran
Mokhtari Fouad
Francisco David Moya Chaves
Ghanshyam Singh
Gulden Kokturk
Huseyin Ince
Lahcene Hadj Abderrahmane
Harjit Pal Singh
Hazem El-bakry
Mohd Helmy Abd Wahab
Hemalatha.M
Hassan Elsayed Ahmad Ibrahim
Hime Aguiar
Hwee San Lim
Ismail Saritas
Jacek Kolodziej
Jamal Dargham
Jan Ochodnicky
Joao Carmo
Chi,chieh-tsung Bruce
Kostantinos Kalovrektis
Lyudmila Zinchenko
Mozafaredin Ferdosian Tehrani
N.mahendran Nagalingam
Mário Cesar Do Espirito Santo Ramos
Minhui Yan
Mostafa Mostafa Abutaleb
Mihai Timis,mihai
Nitish Gupta
P.Palanivel
Digital Preservation
IARAS is partnering with Portico to preserve collections from its Digital Archives products. Digital Preservation
IARAS’s Portico participation means that there will be uninterrupted access to the historical content in these collections.
IARAS launched its Digital Archives in 2016 as part of an ongoing initiative to digitize important primary documents of historical source materials used by scholars and students.
EBSCO will be taking part in Portico’s D-Collection Preservation Service which preserves digitized historic collections on behalf of participating publishers.
This service is solely supported by publishers that have committed their collections to the archive and more than 120 d-collections are preserved in Portico today.
Contact Information
Contact Information
*Neofit Rilski 61, Sofia 1000, BULGARIA Αnnexes: ENSEIRB rue A Schweitzer 33400, Talence, FRANCE Metohiu 45, Nicosia, 1101, CYPRUS
Email: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.
Submit a Manuscript
Submit a Manuscript
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission Current e-mail addresses must be provided for all suggested reviewers. Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission If for some technical reason online submission is not successful, the author can submit the manuscript to This email address is being protected from spambots. You need JavaScript enabled to view it.