Charge and Health Status Estimation of a Lithium Ion Battery in an Electric Vehicle Using Cell Balancing IOT Modelling Techniques
AUTHOR(S): Rakshitha Ravi, Usha Surendra
- Views: 23 hit(s) Pub. Date: 06 April 2021
AUTHOR(S): Komina Amevoin, Lakpo Koku Agboyi, Mondjonnesso Gomina, Kokouvi Kounoutchi, Kokou Hadah Bassimbako, Bassï Essohouna Bodjona, Fantche...
- Views: 21 hit(s) Pub. Date: 30 March 2021
Local Si-allophane Rich Soil Adsorbent for Phosphate Removal From Synthetic Wastewater: Equilibrium, Kinetic, Thermodynamic and Co-ions Studies
AUTHOR(S):Cornelius Tsamo, Miss Tjilha Etienne Hervé, Abba Paltahe, Djorwe Bonga
- Views: 304 hit(s) Pub. Date: 29 July 2020
The Influence Of Social Media Advertising, E-Marketing And Product Quality On The Process of Purchasing Nature Cosmetics
AUTHOR(S):Lusiah, Hendra, Wan Suryani, Errie Margery
- Views: 483 hit(s) Pub. Date: 08 June 2020
Surface Sorption of Divalent Manganese Ion from Water by Biomass of Date Palm Seeds: Kinetic Studies
AUTHOR(S):Mohammed A. Al-Anber , Idrees F. Al-Momani, Wala’ Al-Qaisi
- Views: 316 hit(s) Pub. Date: 20 March 2020
AUTHOR(S):José Rato Nunes, José Telo Da Gama, João Carvalho, António Lopezpiñeiro, David Peña, Luis Loures
- Views: 384 hit(s) Pub. Date: 29 December 2019
Synthesis, Characterization and Physico-chemical Properties of Novel Mixed Ligand Platinum(Ii) Complexes with Nitrogen and Sulfur Atoms
AUTHOR(S):Dilgam Tagiyev, Asmet Azizova, Mirsalim Asadov
- Views: 391 hit(s) Pub. Date: 29 December 2019
Mathematical Modeling of the Hardware Design of the Catalytic Process of Hydrocarbon Processing at the Design Stage
AUTHOR(S):Salim Asadov, Ali Akhundov, Dilgam Tagiyev
- Views: 392 hit(s) Pub. Date: 29 December 2019
Electrochemical Behaviors of Negative and Positive Plates Leadacid Battery in the Presence of Polyaniline Hydro-Soluble in 0.5 M H2SO4 Medium
AUTHOR(S): Naima Boudieb, Moussa Bounoughaz, Zohra Ghebache, Fahim Hamidouche
- Views: 394 hit(s) Pub. Date: 29 December 2019
Investigation of Possibilities for Prediction of Automobile Bio-Oils Parameters by Color Image Analysis
AUTHOR(S):Zlatin Zlatev, Eleonora Kirilova, Tsvetelina Georgieva, Plamen Daskalov
- Views: 606 hit(s) Pub. Date: 11 July 2019
Preparation and Characterization of PES-based Membranes : Impact of the Factors Using a Central Composite an Experimental Design
AUTHOR(S):Nathalie Kobbe Dama, Anthony Szymczyk, Antoine Arfao Tamsa, Jean Bosco Tchatchueng
- Views: 900 hit(s) Pub. Date: 26 February 2019
AUTHOR(S):Lucica Anghelescu, Mihai Cruceru, Bruno Valentim, Bogdan Diaconu
- Views: 689 hit(s) Pub. Date: 18 December 2018
AUTHOR(S):Emilia Neag, Maria-Alexandra Hoaghia, Anamaria Török, Erika Levei, Marin Senila, Cecilia Roman
- Views: 788 hit(s) Pub. Date: 22 November 2018
AUTHOR(S): Pierre Hansen, Mustapha Aouchiche, Gilles Caporossi, Alain Hertz, Cherif Sellal
- Views: 1098 hit(s) Pub. Date: 22 March 2018
Effect of Phosphorus Addition on the MoS2 Phase Morphology and Performance of Sulfided Mo/Al2O3 Catalysts in HDO of Rapeseed Oil
AUTHOR(S): Evgeniya N. Vlasova, Vera P. Pakharukova, Galina A. Bukhtiyarova, Irina V. Deliy, Pavel V. Aleksandrov, Aleksander A. Porsin, Evgeny Yu...
- Views: 1152 hit(s) Pub. Date: 22 March 2018
AUTHOR(S): Claudia Dragan, Cristian Pantilimon, Andra Predescu, George Coman, Ecaterina Matei, Cristian Predescu
- Views: 1143 hit(s) Pub. Date: 13 February 2018
AUTHOR(S): P. Jimbert, M. Iturrondobeitia, R. Fernandez-Martinez, J. I. Barbero, M. Serna, D. Eguizabal, A. Arteaga
- Views: 1191 hit(s) Pub. Date: 18 January 2018
Effect of polymer matrix type on electromagnetic radiation shielding performances of PbO reinforced / polyethylene, isophytalic polyester and bisphenol A vinylester based composites
AUTHOR(S): Gul Asiye Aycik, Ezgi Eren Belgin
- Views: 1190 hit(s) Pub. Date: 16 January 2018
AUTHOR(S): Lacatusu Anca Rovena, Burtan Lavinia, Coronado M., Preda Claudia, Lacatusu R
- Views: 1132 hit(s) Pub. Date: 01 December 2017
Suitable of High Compression Ratio, Injection Duration and Ignition Timing on CB150R Engine for High Performance and Low Emissions with Pure Bioethanol Fuelled
AUTHOR(S): Marth En Paloboran, Gayuh Agung Pamuji, Bambang Sudarmanta, I Nyoman Sutantra, Darmawang
- Views: 1179 hit(s) Pub. Date: 29 November 2017
New Approach to Chemical Activation of Plant Biomass for Producing Activated Carbons with High Surface Area and Capacitance Performance
AUTHOR(S): Zulkhair Mansurov, Vladimir Pavlenko
- Views: 1087 hit(s) Pub. Date: 13 November 2017
AUTHOR(S): Andra Predescu, Ecaterina Matei, Cristian Predescu, Andrei Berbecaru, Claudia Dragan, Cristian Pantilimon
- Views: 1101 hit(s) Pub. Date: 08 May 2017
A Reliable and Computationally Fast Model to Simulate Non-Linear Soil Consolidation in Saturated Clays
AUTHOR(S): Cánovas M., García-Ros G., Alhama I.
- Views: 1054 hit(s) Pub. Date: 08 May 2017
AUTHOR(S): Mansurov Z. A., Nazhipkyzy M., Temirgaliyeva T. S.
- Views: 1271 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Adnan Mujezinovic, Irfan Turkovic, Alija Muharemovic, Sanja Martinez, Slobodan Milojkovic
- Views: 1425 hit(s) Pub. Date: 03 October 2016
AUTHOR(S): Cheng-Tung Chou, Yu-Jen Chen, Chien-Shun Chang, Hong-Sung Yang, Ming-Wei Yang, Ssu-Hung Tu, Zong-Yu Zhuang
- Views: 1409 hit(s) Pub. Date: 20 September 2016
Concerning the Impact of a Submerged Body on Particle Movement in a Fluidized Bed in Terms of Body-Bed Heat Transfer
AUTHOR(S):Rafail Isemin, Sergey Kuzmin, Oleg Milovanov, Dmitry Klimov, Aleksandr Mikhalev, Natalia Muratova
- Views: 1359 hit(s) Pub. Date: 15 June 2016
Conductivity Improvement of Chitosan Membranes through Modification with Lithium for Lithium Polymer Battery Application
AUTHOR(S):S. N. Asnin, Wahab, Dian Permana, L. O. Ahmad, S. H. Sabarwati, L. O. A. N. Ramadhan
- Views: 1339 hit(s) Pub. Date: 13 May 2016
AUTHOR(S):Lukas Kano Mangalla, R. Pangara, Aditya Rahman, Yulius B. Pasolon
- Views: 1110 hit(s) Pub. Date: 13 May 2016
Performance of Modified Fly Ash-Bricks with Sago Husk as Filler for Non-Structural Element in Housing
AUTHOR(S):Kurniati Ornam, Masykur Kimsan, La Ode Ngkoimani, Jahidin
- Views: 1254 hit(s) Pub. Date: 13 May 2016
AUTHOR(S): Niina Katajapuu, Patric Granholm, Mie Hiramatsu, Eri Ishihara, Junichi Hirayama, Paula Pitkäkangas, Pekka Qvist, Mika Luimula
- Views: 1407 hit(s) Pub. Date: 06 May 2016
AUTHOR(S): Srikandi Novianti, Ilman Nuran Zaini, Anissa Nurdiawati, Kunio Yoshikawa
- Views: 1406 hit(s) Pub. Date: 27 April 2016
Technologies and Devices for Granulation Method of Amorphous Materials’ Production Based on Parametric Film Flow Decay
AUTHOR(S): Ivan V. Kazachkov
- Views: 1260 hit(s) Pub. Date: 17 March 2016
Prof. Manijeh Razeghi, Center for Quantum Devices, EECS Dept., Northwestern University 2220 Campus Drive, Evanston, IL 60208-0893, USA
Members of the Editorial Board
Prof. Jun Zhang, College of Chemistry and Chemical Engineering Inner Mongolia University, Hohhot 010021, P. R. China
Prof. Ellis D. Verink Jr., Professor Emeritus, Dept. of Materials Science and Engineering, University of Florida, Gainesville FL, USA
Prof. Vesselin Dimitrov, Department of Silicate Technology, University of Chemical Technology and Metallurgy, Sofia, Bulgaria
Prof. Takeshi Fukuda, Saitama University, Sakura-ku, Saitama 338-8570, Japan
Prof. Seong Ihl Woo, Korea Advanced Institute of Science and Technology, Korea
Prof. David N. Seidman, Northwestern University Evanston, IL 60208-3108, USA
Prof. Davorin Kralj, Faculty of Chemistry and Chemical Engineering, University of Maribor, Maribor, Slovenia
Dr. Sukhvinder Badwal, FTSE, FAIE Chief Research Scientist, CSIRO Energy Technology Private Bag 33, Clayton South 3169 Victoria, Australia
Dr. Stefano Bellucci, Frascati National Laboratory (LNF), National Institute of Nuclear Physics (INFN), Via Enrico Fermi, 40 - 00044 Frascati (RM), Italy
Aims and Scope
The "International Journal of Chemistry and Chemical Engineering Systems" is an open access journal. The goal of this journal is to provide a platform for academicians, researchers and practitioners all over the world to promote, share, and discuss various new issues and developments in all areas of Chemistry and Chemical Engineering. Manuscripts are subject to a rigorous and fair peer-review process. Accepted papers will appear online within 3-4 weeks after their submission. The journal publishes papers including but not limited to the following topics:
CHEMISTRY Analytical chemistry, Organic Chemistry and Applications, Biochemistry, Medicinal chemistry, Neurochemistry, Materials chemistry, organometallic chemistry, Materials chemistry, Nuclear chemistry, Physical chemistry, chemical thermodynamics, chemical kinetics, electrochemistry, statistical mechanics, spectroscopy, and more recently, astrochemistry, quantum chemistry and theoretical chemistry, computational chemistry, condensed matter physics and molecular physics, agrochemistry, astrochemistry (and cosmochemistry), atmospheric chemistry, chemical engineering, chemical biology, chemo-informatics, electrochemistry, environmental chemistry, femtochemistry, flavor chemistry, flow chemistry, geochemistry, green chemistry, histochemistry, history of chemistry, hydrogenation chemistry, immunochemistry, marine chemistry, materials science, mathematical chemistry, mechanochemistry, medicinal chemistry, molecular biology, molecular mechanics, nanotechnology, natural product chemistry, oenology, organometallic chemistry, petrochemistry, pharmacology, photochemistry, physical organic chemistry, phytochemistry, polymer chemistry, radiochemistry, solid-state chemistry, sonochemistry, supramolecular chemistry, surface chemistry, synthetic chemistry, thermochemistry, chemistry in chemical industry CHEMICAL ENGINEERING: Reaction engineering, catalysis and kinetics, Distillation and absorption, Extraction and leaching, Membrane separations, Adsorption and ion exchange, Filtration, sedimentation, centrifugation, hydrocyclons, Phase equilibrium and fluid properties, Fluid flow and multiphase systems, Mixing, Fluidization, Heat transfer processes and equipment, Drying and evaporation, Computer aided process engineering, Particulate solids, Pharmaceutical engineering, Environmental engineering, Electrochemical engineering, Safety in chemical industry, Supercritical fluid applications, Thermodynamics and transport properties, Food processing and technology, Micro- and mesoporous materials, Biotechnology, Process intensification and miniaturisation, Electromembrane processes and integrated membrane systems, Analytical Chemistry, Advanced materials processing, Biochemical and bio-molecular engineering, Bioengineering and biomedical engineering, Biological and Medicinal Chemistry, Biotechnology, Catalysis, Chemical Education, Chemical engineering education, Chemical reaction engineering, Chemical engineering equipment design and process design, Economics and Business Management, Environment, Inorganic Chemistry, Macromolecular Science and Engineering, Materials Chemistry, Organic Chemistry, Physical, Theoretical and Computational Chemistry, Process Safety Management, Rubber, Surface Science, Systems and Control, Green Chemistry Forum, Energy and environment, Food process technology and engineering, Forest product processing, Milk product processing, Industrial collaboration, Industrial drying, Mining and metals, Nanomaterials, Particle technology, Process system, instrumentation and control, Product engineering and product development, Separation and purification, Transport phenomena (heat, mass transfer and fluid flows), Mathematical modeling in chemical engineering, Chemical engineering education, Others.
1. Open Special IssuesAt the moment we have no open Special Issue
2. Special Issue Guidelines: Every proposal for special issue must be sent to us and should include the following
The journal for which the Special Issue is intended * A suggested title for the Special Issue * Proposed Aims and Scope * A list of Guest Editors who will join the Lead Guest Editor in managing the Special Issue, including their names, emails, affiliations, and a short biography (one paragraph) of each of the Guest Editors * A proposed timeline and schedule which includes: * Deadline for submission (6 months from the initial Call-for-Papers) * First round of review (3 months after submission deadline) * Tentative publication date (3 months after the first round of review) All proposals are subject to approval by the journal following a discussion of the proposed Special Issue among the journals Editorial Board. If approved, a Call-for-Papers for the Special Issue will be issued and posted online. Each proposal will be evaluated by three independent experts according to the following Criteria * Relevance to the Journal * Scientific - Technical Originality, * Scientific content And advances beyond the State-Of-The-Art * Potential Impact and tnterest for the readers The Guest Editors cannot act as reviewers for the Special Issues manuscripts. This is to ensure a high-quality, fair, and unbiased peer-review process of every manuscript submitted to the journal, since any manuscript must be recommended by one or more (usually two or more) external reviewers and the Guest Editor before acceptance for publication. The name of the Guest Editor recommending the manuscript for publication is published with the manuscript to indicate and acknowledge their invaluable contribution to the peer-review process and the indispensability of their contributions to the running of the journals. The peer-review process is single blinded; that is, the reviewers know who the authors of the manuscript are, but the authors do not have access to the information of who the peer reviewers are. Every journal published by Hindawi has an acknowledgment page for the researchers who have performed the peer-review process for at least one manuscript in the past year. Without the significant contributions made by these researchers, the publication of the journal would not be possible.
3. Published Special IssuesAt the moment we have no open Special Issue
Time for Publication
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
Web of Science (Clarivate Analytics)
There are 3 citations for articles published in the journal International Journal of Chemistry and Chemical Engineering Systems as of December 2020,
Please click the following link to see the screenshot1, screenshot2.
International Institute Of Organized Research (I2OR)
Polish Scholarly Bibliography (PBN)
Scientific Indexing Services (SIS)
Eurasian Scientific Journal Index
IARAS sends each paper to 3 independent reviewers, experts in the area of the paper. So, each paper will be evaluated by three independent experts according to the following Criteria
1) Relevance to the Journal
2) Scientific - Technical Originality, Potential Impact and Interest for the audience
3) Scientific/Technical Content and Advances beyond The State-Of-The-Art
4) Quality of the Presentation, clarity of the Content
5) Comments for the authors
The reviewers are going to indicate their familiarity with the paper's subject, evaluate the paper along the aforementioned criteria. Finally, the Editor-in-Chief or a Member of the Editorial Board will decide whether a paper will be accepted or not.
Our Score System will classify the papers as follows
* Publish as it is
* Consider after Minor Changes
* Consider after Major Changes
If the Editor recommends Publish as it is the manuscript will undergo a final check by the journals editorial office in order to ensure that the manuscript and its review process adhere to the journals guidelines and policies. Once this is done, the authors will be notified of the manuscripts acceptance, and the manuscript will appear in the Articles in Press section of the journals website.
If the Editor recommends Consider after Minor Changes, the authors are notified to prepare and submit a final copy of their manuscript with the required minor changes suggested by the reviewers. The Editor reviews the revised manuscript after the minor changes have been made by the authors. Once the Editor is satisfied with the final manuscript, the manuscript can be accepted.
If the Editor recommends Consider after Major Changes, the recommendation is communicated to the authors. The authors are expected to revise their manuscripts in accordance with the changes recommended by the reviewers and to submit their revised manuscript in a timely manner. Once the revised manuscript is submitted, the Editor can then make an editorial recommendation which can be Publish Unaltered, Consider after Minor Changes, or Reject.
If the Editor recommends rejecting the manuscript, the rejection is immediate. Also, if the majority of the reviewers recommend rejecting the manuscript, the rejection is immediate.
All journals published by IARAS are committed to publishing only original material, i.e., material that has neither been published elsewhere, nor is under review elsewhere. IARAS as a participant of CrossCheck uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. Manuscripts that are found to have been plagiarized from a manuscript by other authors, whether published or unpublished, will incur plagiarism sanctions.
Publication Ethics and Publication Malpractice Statement
STATEMENT: IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct. The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow") 1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals. 19). All sources of financial support for the project should be disclosed. 21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..
Terms of Collaboration
2). After the Review process is completed by the Assoc. Editor and the Reviewers, it is no longer allowed for the authors to withdraw their paper.
3). PEER REVIEW: All submitted papers are subject to strict peer-review process by at least three international reviewers that are experts in the area of the particular paper. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. The possible decisions include acceptance, acceptance with revisions, or rejection.
4). If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted.
5). Rejected articles will not be re-reviewed.
6). Articles may be rejected without review if they are obviously not suitable for publication.
7). The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism.
8). The reviewers evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.
9). The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
10). Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.
11). Peer review assists the publisher in making editorial decisions and through the editorial communications with the experts form the scientific board ant the author may also assist the author in improving the paper.
12). Manuscripts received for review are treated as confidential documents and are reviewed by anonymous staff.
13). A reviewer should also call to the publisher's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.
14). Authors of contributions and studies research should present an accurate account of the work performed as well as an objective discussion of its significance.
15). A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable.
16). The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
17). Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
18). Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
20). Authors should make themselves aware of the paper processing charges and registration fees of the publication they submit a paper to by reading the respective sections.
IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct.
The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow")
1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals.
19). All sources of financial support for the project should be disclosed.
21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..
Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is single blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and decisions letters of manuscripts are sent within 4 weeks.
The editors of this journal take the responsibility to enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal take such publishing ethics issues very seriously and are trained to proceed in such cases with a zero tolerance policy.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Authors wishing to publish their papers in the Journal are asked to abide to the following rules:
a) Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission.
b) Authors should accurately present their research findings and include an objective discussion of the significance of their findings.
c) Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work.
d) Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication.
f) Simultaneous submission of manuscripts to more than one journal is not tolerated.
Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted).
g) If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken.
h) Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license.
* Plagiarism, data fabrication and image manipulation are not tolerated.
* Plagiarism is not acceptable in IARAS submissions.
* Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source.
Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited.
If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
International Journal of Chemistry and Chemical Engineering Systems currently has an acceptance rate of 29%.
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader Food and Nutrition Science - An International Journal: 150 EUR/paper (*) (*) 150 EUR/paper is the publication fee if you use Bank Deposit.
will ever have to buy a subscription or pay any pay-per-view fees to access articles in the electronic version of the journal.
There is hence no revenue at IARAS neither from the sale of subscriptions to the electronic version of the journal nor from pay-per-view fees.
Yet, the online publication process does involve costs including those pertaining to setup and maintenance of the publication infrastructure, routine operation of the journal, processing of manuscripts through peer-reviews, editing, publishing, maintaining the scholarly record, and archiving. To cover these costs, the journals depends on Publication Fees. Publication Fees are due when a manuscript has been accepted for publication.
International Journal of Agricultural Science: 150 EUR/paper (*)
International Journal of Applied Physics: 150 EUR/paper (*)
International Journal of Biochemistry Research: 150 EUR/paper (*)
International Journal of Biology and Biomedicine: 150 EUR/paper (*)
International Journal of Chemistry and Chemical Engineering Systems: 150 EUR/paper (*)
International Journal of Circuits and Electronics: 150 / paper
International Journal of Communications: 150 EUR/paper (*)
International Journal of Computers: 150 EUR/paper (*)
International Journal of Control Systems and Robotics: 150 EUR/paper (*)
International Journal of Cultural Heritage: 150 EUR/paper (*)
International Journal of Economics and Management Systems: 150 EUR/paper (*)
International Journal of Education and Learning Systems: 150 EUR/paper (*)
Journal of Electromagnetics: 150 EUR/paper (*)
International Journal of Environmental Science: 150 EUR/paper (*)
International Journal of Instrumentation and Measurement: 150 EUR/paper (*)
International Journal of Internet of Things and Web Services: 150 EUR/paper (*)
International Journal of Mathematical and Computational Methods: 150 EUR/paper (*)
International Journal of Mechanical Engineering: 150 EUR/paper (*)
International Journal of Medical Physiology: 150 EUR/paper (*)
International Journal of Power Systems: 150 EUR/paper (*)
International Journal of Renewable Energy Sources: 150 EUR/paper (*)
International Journal of Signal Processing: 150 EUR/paper (*)
International Journal of Theoretical and Applied Mechanics: 150 EUR/paper (*)
International Journal of Tourism: 150 EUR/paper (*)
International Journal of Transportation Systems: 150 EUR/paper (*)
International Journal of Veterinary Medicine: 150 EUR/paper (*)
If you want to use Credit Card, it is 158 EUR due to conversions in local
currency and bank commissions.
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader
Food and Nutrition Science - An International Journal: 150 EUR/paper (*)
(*) 150 EUR/paper is the publication fee if you use Bank Deposit.
So far for the "International Journal of Chemistry and Chemical Engineering Systems"
we have used the following Reviewers
Jose Alberto Duarte Moller
Mir Mohammad Alavi Nikje
Jose Alberto Duarte Moller
Fattaneh Daneshmand Malayeri
Elaine Inacio Bueno
Csaki (Apostolescu) Ioana
Jose Antonio Porfirio
Lungu Mihai Aureliu
Lakhoua Mohamed Najeh
Michael H. Schwarz
Mário Cesar Do Espirito Santo Ramos
Submit a Manuscript
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission Current e-mail addresses must be provided for all suggested reviewers. Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission If for some technical reason online submission is not successful, the author can submit the manuscript to firstname.lastname@example.org
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission
Current e-mail addresses must be provided for all suggested reviewers.
Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission
If for some technical reason online submission is not successful, the author can submit the manuscript to email@example.com