Articles
Articles
Study and Experimental Work on Friction Stir Welding of Similar and Dissimilar AZ31/ AZ91 Mg Alloys
An Effect of Blending Ratio on Mechanical and Thermal Properties of the Sawdust-cocoa Pod Briquettes
Microbeats Distributions on Tensor Fields
Analysis of Different Toolpath Strategies for Machining of The Steam Turbine Blade on Surface Roughness and Machining Time
Investigation of Nonlinear Fluid Flow Equation in a Porous Media and Evaluation of Convection Heat Transfer Coefficient, By Taking the Forchheimer Term into Account
Notes on Mathematical Techniques in Rotational and Non-rotational Cylindrical Disks
Two-Dimensional Flow of a Pressure-Dependent Viscosity Fluid in Porous Media with a Specified Streamfunction
Increasing the Accuracy of a Marine Diesel Engine Operation Limit by Thermal Factor
Crashing Analysis of end-capped thin-walled Steel Conical Frusta Containing Cutouts
Prediction of Strength Properties of Natural Fiber-porous Composites by Neural Networks
Simulation Approach of an Automation System for Heavy Equipment Feed Drives
Derivation and Analysis of the Navier-Stokes Equations in Coordinate System Rotating Around the Vertical Axis
Analysis the Effect of the Volute Diffuser on Unsteady Pressure Pulsation in a Centrifugal Pump at Large Operating Conditions
Memory Dependent Thermal Response in Generalized Magneto-thermoelastic Medium Having a Long Cylindrical Cavity
Effect of Cerium and Praseodymium Additions on Impact Toughness of AA5083 Alloy at Room Temperature and Sub-Zero-Temperature
Robust Numerical Solution for Solving Elastohydrodynamic Lubrication (EHL) Problems using Total Variation Diminishing (TVD) Approach
Modelling of Thermo Magnetic Field Effects on Stability Analysis of a Single Walled Carbon Nanotube Rested on Polymer Matrix
Nonlinear Model Predictive Control of a Stewart Platform Based on Improved Dynamic Model
Simulation of Fully Coupled Thermomechanical Analysis of Connecting Rod. Engine Type F4L912
An Effective Galerkin Boundary Element Method for a 3d Half-space Subjected to Surface Loads
Axisymmetric Problem of a Microelongated Thermoelastic Medium Due to Thermomechanical Sources
Analytical Investigations of Plane Wave Propagation Across a Single Tuned Mass Damper
Numerical Investigation of Heat Transfer Enhancement of Double Pipe Heat Exchanger
Characterization of PVA/chitosan Nano Fiber Membrane and Increasing Mechanical Properties with Cross-Linking by Heating
Elastically Damped Transient Response of Axially FG Straight Beams
FEM based Work Equivalent Nodal Load Derivations for Plates Resting on Winkler Foundations
Resonant Orbits for the Space Debris
Efficient 2D Stress Analysis of an Isotropic Bolted Joint Connection with Finite Dimensions using the Airy Stress Function
Performance Comparison of Location of Optimum TMD on Seismic Structures
Grey Wolf Optimizer Based Design of Reinforced Concrete Retaining Walls Considering Shear Key
Investigation of Cross-Sectional Dimension on Optimum Carbon Fiber Reinforced Polymer Design for Shear Capacity Increase of Reinforced Concrete Beams
Artificial Neural Network Model for Optimum Design of Tubular Columns
Time Delay Factor of Structural Control Systems for Excitations with and Without Pulses
Mass Ratio Factor on Optimum TMD Design in Frequency Domain
Some Researches in the Field of Fatigue Phenomenon in Engineering
Contribution to the Performance Computation by Enhanced Cooling Tower
Stress intensity factors in crack closure problems
Studies to avoid breaking tool in manufacturing by broaching operation
A review of Mechanical Properties of Jute-glass and Luffa-glass fiber reinforced epoxy hybrid composites
Experimental evaluation of 3D steel joint with loading in both axis
Bessel Models of Linear Viscoelasticity
Effect of High Performance Concrete Mixture on Behavior of Passive and Active Confined CFT
Variance of the Vertical Accelerations due to the Suspended Masses in the System “Railway Vehicle-Track”: Simulation Technique, Differential Equation, Fourier Transform and Approximants
The Relationship between the Impact Resistance, Sound Emittance and the Hardness of Wooden Floorings
Modeling Fluid Flow and Heat Transfer in Shell and Tube Heat Exchangers According to Shape and Layout of Tubes
An Experimental research on wake behind airfoil Naca0012 under various angles
Effect of butt joint distortion on Ti/Al dissimilar metal using Laser beam welding
Artificial Neural Networks based prediction and Multi Response Optimization on EDM of Aluminium/Fly ash composites
Torque Characterization of Magnetorheological Brake using Finite Element Analysis
The Effect of Coefficient of Restitution for Two Collision Models
Experimental Measurement of Volume Changes of Cement Concrete Specimens
Delamination of a Composite Laminated under Monotonic Loading
Numerical study of quenching heat treatment: Influence of the cooling modes on the hardness
Experimental Study of Two-Phase Flow Using Shadowgraphy and IPI Technique
Multiple Solutions of Slip Flow and Heat Transfer over an Exponential Shrinking Sheet with Stability Analysis
Impact of Low Temperatures on Compressive Strength of Concrete
Specific Problems Occurred in Dental Materials
Solution of Some Inverse Problems for Heat and Mass Transport in Unsaturated Porous Media
PIV Study of Flow Field in Rushton Turbine Stirred Vessel Influenced by Spatial Resolution
The Effect of Flow-Induced Oil-Water Emulsions on Pressure Drop
On the Integral Form of the Motion Equations for Free Surface Flow
Model of Fatigue Crack and Effect of Triaxiality
Fatigue Life Prediction of Titanium Specimens With TiO2 Surface
Some Considerations Regarding the Analysis of Pneumatic Actuators by Mathematical Models
Interaction Optimization in Multibody Dynamic System
Static and Free Vibration Analysis of Planar Curved Composite Beams on Elastic Foundation
Optimization of Mix Composition of Cement-less Wastepaper-Based Lightweight Block (CWLB)
Discontinouity Modelling for Finite Difference Method
Prediction of Plastic Deformation in the Stringer According to the Press Head
A Study on Effect of Immersion on the Mechanical Characteristics of Polyurethane Foam
A Study on Mechanical Behavior of Deformation Experienced Polyisocyanurate Foam under Compressive Load
Numerical Simulation on the Influence of Solidification Rate on Mechanical Properties of Semi-Crystalline Thermoplastic Composites
Melting Performance Enhancement of Triplex Tube Latent Thermal Storage Using Fins-NanoPCM Technique
The Effects of Supports on Optimum Design of RC Continuous Beams
Restricted Optimum Design of Reinforced Concrete Retaining Walls
Mechanical Behaviour - Idealised Zones on Stress Space
Utilization of Asphalt Belt as Sliding Joint for Friction Elimination
Experimental Verification of Innovative Shear Connection of Composite Steel-Concrete Beams Using Push-out Tests
Deformation of Foundation Structure and their Experimental Testing
Loading Tests of Adhesively Bonded Joints of Glass-Fibre Reinforced Plastic Composite Members
Analysis of Model Foundation Slab Focused on Strain Gauge Measurement
Freeze-Thaw Resistance of Self Compacting Concrete Incorporating Basic Pumice
Non-Linear Programing for Sizing Optimization of Truss Structures
Size Optimization of Truss Structures Employing Flower Pollination Algorithm without Grouping Structural Members
Optimum Tuning of Mass Dampers for Seismic Structures Using Flower Pollination Algorithm
Stability Analysis of a Geometrically Imperfect Structure Using a Random Field Model
A Simple Solution for Randomized Failure Modeling with the SPH Method
Natural Vibrations of a Nano-Beam with Cracks
A General Elastic Shell Model for Advanced Structures
Mathematical Modelling of Multirotor UAV
Linear Analysis of an Innovative System for Wooden Arches and Vaults
Passable Motions and Stick Motions of Friction-Induced Oscillator with 2-DOF on a Speed-Varying Belt
How to Handle Irregular Distribution of SPH Particles in Dynamic Fracture Analysis
Spectral and Statistical Analysis of the Internal Bore Evolution
Research on Quality Assurance for Parts Obtained by Machining
On Path Planning for Obstacle Avoidance: Comparison Between Two Finite Element Approaches
Hyper Velocity Impact Phenomenon and the Damages Caused by it to Structural Members
Sensitivity of FRF’s Curvature Difference Method in Detecting Damage
A Study of Determination of Geological Age by Thermal Analysis Method
Load Values Influence on Stresses in Monolithic Ceramic Molar Crowns
Stress Waves in Solids, Transmission, Reflection and Interaction and Fractures Caused by Them: State of the Art
Experimental Study on the Restrained Shrinkage Cracking of FRC Composite Metal Decks
Shear Strengthening Reinforced Concrete Beams with Externally Bonded Fiber-Reinforced Polymer: Updated Data Base
Approximation to Expectation Value of Non-Selfadjoint Operator in Anharmonic Exponential Oscillator System with Use of Two-Sided Rayleigh Quotient
Theoretical and Experimental Investigation of the Stability of Supersonic Boundary Layer on Porous Coating
Stability and Stabilization of the Solidification Front for Melt Flow in Cylindrical Channel with Phase Change on a Wall. Part 2
Stability Problems of Pyramidal von Mises Planar Trusses with Geometrical Imperfection
Fuzzy Analysis of the Serviceability Limit State of a Truss Cantilever
Strong and Weak Interactions in Stochastic Systems of Nonlinear Mechanics
A Study on the Fusion Reducer Module with No-Lubrication, High Precision for the Robot
Control of Supersonic Boundary Layer and its Stability by Means of Foreign Gas Injection Through the Porous Wall
Experimental Investigation of Active Disturbance Rejection Control for Vehicle Suspension Design
Bed Rugosity Determination for Critical Velocity Profile in Cohesionless Sediment Beds
Strengthening Concrete Sections by FRP Materials
An Experimental Study of Flow in Model of Hydraulic Turbine
Modeling of Hydrogen Embrittlement of Metals in Wet H2S Containing Environments
Numerical Investigation of Flow Structure in Hydraulic Turbines of High-Head Power Development
Heat Transfer Coefficients and Efficiency Loss in Plate Heat Exchangers During the Ammonia Liquor Cooling Process
Simulation of Behaviour Dynamics of the Ship Steam Boiler
Analysis of Combustibility Limits for Lean Methane/Air Mixtures in Cylindrical Annular Packed Bed
Second Order Differential Equation of Motion in Railways: the Variance of the Dynamic Component of Actions due to the Sprung Masses of the Vehicles
Effects of the individual terms of the lunar potential in the motion of satellites around the moon
Slip Effects on MHD Non-Darcy Boundary layer Flow over a Stretching Sheet in a Porous Medium with radiation and Ohmic Dissipation
Combined low-Reynolds-number k-ε model for recirculating flows
Editorial Board
Editor-in-Chief
Prof. Joseph Quartieri, University of Salerno, Salerno, Italy
Co-Editors-in-Chief
Prof. Claudio Guarnaccia, University of Salerno, Salerno, Italy
Prof. Lucjan Setlak, Polish Air Force University, Deblin, Poland
Members of the Editorial Board
Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
Prof. Jiin-Yuh Jang, University Distinguished Professor, ASME Fellow, National Cheng-Kung University, Taiwan
Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Acamedy of Engineering of Korea), Korea
Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
Prof. Sorinel Adrian Oprisan, Department of Physics and Astronomy, College of Charleston, USA
Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
Prof. Marcin Kaminski, Department of Structural Mechanics, Al. Politechniki 6, 90-924 Lodz, Poland
Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
Prof. Moran Wang, Tsinghua University, Beijing, China
Aims and Scope
Aims and Scope
The International Journal of Theoretical and Applied Mechanics is an open access journal. The goal of this journal is to provide a platform for academicians, researchers and practitioners all over the world to promote, share, and discuss various new issues and developments in all areas of Theoretical and Applied Mechanics. Manuscripts are subject to a rigorous and fair peer-review process. Accepted papers will appear online within 3-4 weeks after their submission. The journal publishes papers including but not limited to the following topics:
Plasticity, Fracture and Damage Mechanics, Mechanics of Nanomaterials, Fluid-Structure Interaction, Damage Identification and Non Destructive Evaluation (NDE), Computational and Experimental Mechanics, Geomechanics and Mechanics of Granular Materials, Flows in Porous Media, Impact and Multibody, Dynamics, Nonlinear Dynamics, Structural Dynamics and Control, Dynamic Instability and Buckling, Vibrations, Acoustics and Noise Control, Manufacturing Processes, Advanced Materials and Smart Structures, Micro ElectroMechanical Systems (MEMS), Mechatronics, Transport Phenomena in Micro/Nanoscale, Aerodynamics and Aeroelasticity, Computational Fluid Dynamics (CFD), Turbulence and Multiphase Flows, Biomechanics and Biomaterials, Surface Engineering and Contact Mechanics, Heat and Mass Transfer, Compressible Flows, Applications
Special Issues
Special Issues
1. Open Special Issues
At the moment we have no open Special Issue
2. Special Issue Guidelines: Every proposal for special issue must be sent to us and should include the following
The journal for which the Special Issue is intended
* A suggested title for the Special Issue
* Proposed Aims and Scope
* A list of Guest Editors who will join the Lead Guest Editor in managing the Special Issue, including their names, emails, affiliations, and a short biography (one paragraph) of each of the Guest Editors
* A proposed timeline and schedule which includes:
* Deadline for submission (6 months from the initial Call-for-Papers)
* First round of review (3 months after submission deadline)
* Tentative publication date (3 months after the first round of review)
All proposals are subject to approval by the journal following a discussion of the proposed Special Issue among the journals Editorial Board. If approved, a Call-for-Papers for the Special Issue will be issued and posted online.
Each proposal will be evaluated by three independent experts according to the following Criteria
* Relevance to the Journal
* Scientific - Technical Originality,
* Scientific content And advances beyond the State-Of-The-Art
* Potential Impact and tnterest for the readers
The Guest Editors cannot act as reviewers for the Special Issues manuscripts. This is to ensure a high-quality, fair, and unbiased peer-review process of every manuscript submitted to the journal, since any manuscript must be recommended by one or more (usually two or more) external reviewers and the Guest Editor before acceptance for publication.
The name of the Guest Editor recommending the manuscript for publication is published with the manuscript to indicate and acknowledge their invaluable contribution to the peer-review process and the indispensability of their contributions to the running of the journals.
The peer-review process is single blinded; that is, the reviewers know who the authors of the manuscript are, but the authors do not have access to the information of who the peer reviewers are. Every journal published by Hindawi has an acknowledgment page for the researchers who have performed the peer-review process for at least one manuscript in the past year. Without the significant contributions made by these researchers, the publication of the journal would not be possible.
3. Published Special Issues
At the moment we have no open Special Issue
Time for Publication
Time for Publication
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
Indexes
Indexes
This journal is indexed by the following indexes - databases:
Index Copernicus
Cosmos Impactfactors
Google Scholar
International Institute Of Organized Research (I2OR)
ROAD
Polish Scholarly Bibliography (PBN)
Research Bible
JURN
Scientific Indexing Services (SIS)
Eurasian Scientific Journal Index
EBSCO
Review Process
Review Process
IARAS sends each paper to 3 independent reviewers, experts in the area of the paper. So, each paper will be evaluated by three independent experts according to the following Criteria
1) Relevance to the Journal
2) Scientific - Technical Originality, Potential Impact and Interest for the audience
3) Scientific/Technical Content and Advances beyond The State-Of-The-Art
4) Quality of the Presentation, clarity of the Content
5) Comments for the authors
The reviewers are going to indicate their familiarity with the paper's subject, evaluate the paper along the aforementioned criteria. Finally, the Editor-in-Chief or a Member of the Editorial Board will decide whether a paper will be accepted or not.
Our Score System will classify the papers as follows
* Publish as it is
* Consider after Minor Changes
* Consider after Major Changes
* Reject
If the Editor recommends Publish as it is the manuscript will undergo a final check by the journals editorial office in order to ensure that the manuscript and its review process adhere to the journals guidelines and policies. Once this is done, the authors will be notified of the manuscripts acceptance, and the manuscript will appear in the Articles in Press section of the journals website.
If the Editor recommends Consider after Minor Changes, the authors are notified to prepare and submit a final copy of their manuscript with the required minor changes suggested by the reviewers. The Editor reviews the revised manuscript after the minor changes have been made by the authors. Once the Editor is satisfied with the final manuscript, the manuscript can be accepted.
If the Editor recommends Consider after Major Changes, the recommendation is communicated to the authors. The authors are expected to revise their manuscripts in accordance with the changes recommended by the reviewers and to submit their revised manuscript in a timely manner. Once the revised manuscript is submitted, the Editor can then make an editorial recommendation which can be Publish Unaltered, Consider after Minor Changes, or Reject.
If the Editor recommends rejecting the manuscript, the rejection is immediate. Also, if the majority of the reviewers recommend rejecting the manuscript, the rejection is immediate.
All journals published by IARAS are committed to publishing only original material, i.e., material that has neither been published elsewhere, nor is under review elsewhere. IARAS as a participant of CrossCheck uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. Manuscripts that are found to have been plagiarized from a manuscript by other authors, whether published or unpublished, will incur plagiarism sanctions.
Publication Ethics and Publication Malpractice Statement
Publication Ethics and Publication Malpractice Statement
STATEMENT: IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct. ΙARAS follows strictly these GUIDELINES ON GOOD PUBLICATION PRACTICE (from COPE): https://publicationethics.org/files/u7141/1999pdf13.pdf The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow") 1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals. 19). All sources of financial support for the project should be disclosed. 21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..Terms of Collaboration
2). After the Review process is completed by the Assoc. Editor and the Reviewers, it is no longer allowed for the authors to withdraw their paper.
3). PEER REVIEW: All submitted papers are subject to strict peer-review process by at least three international reviewers that are experts in the area of the particular paper. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. The possible decisions include acceptance, acceptance with revisions, or rejection.
4). If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted.
5). Rejected articles will not be re-reviewed.
6). Articles may be rejected without review if they are obviously not suitable for publication.
7). The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism.
8). The reviewers evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.
9). The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
10). Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.
11). Peer review assists the publisher in making editorial decisions and through the editorial communications with the experts form the scientific board ant the author may also assist the author in improving the paper.
12). Manuscripts received for review are treated as confidential documents and are reviewed by anonymous staff.
13). A reviewer should also call to the publisher's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.
14). Authors of contributions and studies research should present an accurate account of the work performed as well as an objective discussion of its significance.
15). A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable.
16). The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
17). Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
18). Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
20). Authors should make themselves aware of the paper processing charges and registration fees of the publication they submit a paper to by reading the respective sections.
Editorial Workflow
Editorial Workflow
*MANAGEMENT: Our Editor-in-Chief manages this Journal. Receives the articles from IARAS,
checks them, rejects those that are not appropriate and forwards to reviewers whatever he believes that deserves an evaluation via the system of peer review.
Co-Editors-in-Chief have an Advisory Role.
* OWNERSHIP: IARAS Publications Ltd.Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is single blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and decisions letters of manuscripts are sent within 4 weeks.
The editors of this journal take the responsibility to enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal take such publishing ethics issues very seriously and are trained to proceed in such cases with a zero tolerance policy.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Authors wishing to publish their papers in the Journal are asked to abide to the following rules:
a) Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission.
b) Authors should accurately present their research findings and include an objective discussion of the significance of their findings.
c) Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work.
d) Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication.
f) Simultaneous submission of manuscripts to more than one journal is not tolerated.
Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted).
g) If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken.
h) Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license.
* Plagiarism, data fabrication and image manipulation are not tolerated.
* Plagiarism is not acceptable in IARAS submissions.
* Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source.
Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited.
If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
Acceptance Rate
Acceptance Rate
International Journal of Theoretical and Applied Mechanics currently has an acceptance rate of 28%.
Publication Fees
Publication Fees
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader Food and Nutrition Science - An International Journal: Except the fees, IARAS does not have any other source of Revenue. 150 105 EUR /paper until December 31, 2023
will ever have to buy a subscription or pay any pay-per-view fees to access articles in the electronic version of the journal.
There is hence no revenue at IARAS neither from the sale of subscriptions to the electronic version of the journal nor from pay-per-view fees.
Yet, the online publication process does involve costs including those pertaining to setup and maintenance of the publication infrastructure, routine operation of the journal, processing of manuscripts through peer-reviews, editing, publishing, maintaining the scholarly record, and archiving. To cover these costs, the journals depends on Publication Fees. Publication Fees are due when a manuscript has been accepted for publication.150 105 EUR /paper until December 31, 2023
International Journal of Agricultural Science: 150 105 EUR /paper until December 31, 2023
International Journal of Applied Physics: 150 105 EUR /paper until December 31, 2023
International Journal of Biochemistry Research: 150 105 EUR /paper until December 31, 2023
International Journal of Biology and Biomedicine: 150 105 EUR /paper until December 31, 2023
International Journal of Chemistry and Chemical Engineering Systems: 150 105 EUR /paper until December 31, 2023
International Journal of Circuits and Electronics: 150 105 EUR /paper until December 31, 2023
International Journal of Communications: 150 105 EUR /paper until December 31, 2023
International Journal of Computers: 150 105 EUR /paper until December 31, 2023
International Journal of Control Systems and Robotics: 150 105 EUR /paper until December 31, 2023
International Journal of Cultural Heritage: 150 105 EUR /paper until December 31, 2023
International Journal of Economics and Management Systems: 150 105 EUR /paper until December 31, 2023
International Journal of Education and Learning Systems: 150 105 EUR /paper until December 31, 2023
Journal of Electromagnetics: 150 105 EUR /paper until December 31, 2023
International Journal of Environmental Science: 150 105 EUR /paper until December 31, 2023
International Journal of Instrumentation and Measurement: 150 105 EUR /paper until December 31, 2023
International Journal of Internet of Things and Web Services: 150 105 EUR /paper until December 31, 2023
International Journal of Mathematical and Computational Methods: 150 105 EUR /paper until December 31, 2023
International Journal of Mechanical Engineering: 150 105 EUR /paper until December 31, 2023
International Journal of Medical Physiology: 150 105 EUR /paper until December 31, 2023
International Journal of Power Systems: 150 105 EUR /paper until December 31, 2023
International Journal of Renewable Energy Sources: 150 105 EUR /paper until December 31, 2023
International Journal of Signal Processing: 150 105 EUR /paper until December 31, 2023
International Journal of Theoretical and Applied Mechanics: 150 105 EUR /paper until December 31, 2023
International Journal of Tourism: 150 105 EUR /paper until December 31, 2023
International Journal of Transportation Systems: 150 105 EUR /paper until December 31, 2023
International Journal of Veterinary Medicine: 150 105 EUR /paper until December 31, 2023
IARAS does not have subscriptions, does not have advertising revenue, does not sell reprints, and does not have any other institutional or organizational support.
Publishing fees or waiver status should not influence editorial decision making.
Sometimes, excellent papers might be published without fees, especially if the comments from the three Reviewers are that the article does not need corrections and can be published "as it is" or if the authors have special financial difficulties.
IARAS does not have Direct Marketing Activities
Reviewers Acknowledgment
Reviewers Acknowledgment
So far for the "International journal of Theoretical and Applied Mechanics"
we have used the following Reviewers
Jose Alberto Duarte Moller
Alina Adriana Minea
Che Sidik Nor Azwadi
Cotoros Diana
Elena Mereuta
Al Emran Ismail
Hamed Ziaeipoor
Ioan Doroftei
José Ignacio Hernández López
Krishnan Jayaraman
Guoxiang Liu
Calbureanu Popescu Madalina Xenia
Miguel Carriegos
Cosmin Sinescu
Mohsen Askari
Mostafa Kamkar Khaboushan
Muhammad Qasim
M.M. Noor
Oguz Arslan
Valeriy Perminov
Gillich Gilbert-rainer
Dr. Rosli Abu Bakar
Coroiu Petruţa Maria
Saurabh Kwatra
Silviu Nastac
S.Sarala Subramani
Yogesh Kumar
Zhenbi Su
Kun Luo
Syahrullail Samion
Georgel Chirita
Baritz Mihaela
J N Sharma Sharma
Luca Placidi
Shravan Shenoy
Liliana Porojan
Chunwei Lu Wini
Cavaropol Dan Victor
Sorin Gherghinescu
Vasile Cojocaru
Natasa Trisovic
Florin Nedelcut
Roots Larissa
Tomas Plachy
Luís Roseiro
Tapano Kumar Hotta
Anghel Vasile
Abdul Rajjak Shaikh
Seripah Awang Kechil
Carlos E. Formigoni
Helena Coumoulos
Hessam Ghasemnejad
Noor Fadiya Mohd Noor
Mahdi Falsafioon
Wen-Pin Hu
Dipti Prasad Mishra
Ivo Stancic
Hamid Bashiri Atrabi
Sachindra Rout
Mohammadreza Sedighi
Behnam Nilforooshan
Silviu Nastac
Raja Ishak Raja Hamzah
Zaini Ahmad
Hugo Rodrigues
Yunan Prawoto
Chao Wang
Nima Vaziri
Mohammad Israr
Mohammad Gudarzi
Digital Preservation
IARAS is partnering with Portico to preserve collections from its Digital Archives products. Digital Preservation
IARAS’s Portico participation means that there will be uninterrupted access to the historical content in these collections.
IARAS launched its Digital Archives in 2016 as part of an ongoing initiative to digitize important primary documents of historical source materials used by scholars and students.
EBSCO will be taking part in Portico’s D-Collection Preservation Service which preserves digitized historic collections on behalf of participating publishers.
This service is solely supported by publishers that have committed their collections to the archive and more than 120 d-collections are preserved in Portico today.
Contact Information
Contact Information
*Neofit Rilski 61, Sofia 1000, BULGARIA Αnnexes: ENSEIRB rue A Schweitzer 33400, Talence, FRANCE Metohiu 45, Nicosia, 1101, CYPRUS
Email: info@iaras.org, iaras.institute@gmail.com
Submit a Manuscript
Submit a Manuscript
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission Current e-mail addresses must be provided for all suggested reviewers. Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission If for some technical reason online submission is not successful, the author can submit the manuscript to support@iaras.org