AUTHOR(S):Sid Ahmed Dahmane, Abdelwahab Azzedine, Abdelkader Megueni
- Views: 61 hit(s) Pub. Date: 14 May 2020
AUTHOR(S): Chiheb Ben Regaya, Fethi Farhani, Abderrahmen Zaafouri, Abdelkader Chaari
- Views: 220 hit(s) Pub. Date: 29 December 2019
Decoupled Integral LQR Controller with Anti-windup Compensator for MIMO Two Rotor Aerodynamical System (TRAS)
AUTHOR(S): Saeed Al-Haddad, Herman Wahid
- Views: 188 hit(s) Pub. Date: 29 December 2019
Comparative Analysis of the Hydrogenerator Technical State Estimation Models in Fuzzy-Information Conditions
AUTHOR(S):Mykola V. Kosterev, Volodymyr V. Litvinov, Volodymyr V. Litvinov
- Views: 177 hit(s) Pub. Date: 29 December 2019
Improve the Accuracy of Short-term Forecasting Algorithms by Standardized Load Profile and Support Regression Vector: Case Study Vietnam
AUTHOR(S): Nguyen Tuan Dung, Nguyen Thanh Phuong
- Views: 193 hit(s) Pub. Date: 29 December 2019
AUTHOR(S):Ahmed Chouya, Mohamed Chenafa, Abdellah Mansouri
- Views: 191 hit(s) Pub. Date: 27 December 2019
AUTHOR(S):Pinar Akpinar, Mariya A. Abubakar
- Views: 158 hit(s) Pub. Date: 27 December 2019
Comparison of Artificial Neural Network Controller and PID Controller in on Line of Real Time Industrial Temperature Process Control
AUTHOR(S):Abdulgani Albagul, Hafed Efheij, Beleid Alsharif
- Views: 314 hit(s) Pub. Date: 11 December 2019
Finite Control Set – Model Predictive Control of a Nine Level Packed U Cell Grid Connected Multilevel Inverter
AUTHOR(S): Alaa’Abuqubaita, Sameer Khader, Abdel Karim Daud, Hamza Makhamreh
- Views: 259 hit(s) Pub. Date: 26 November 2019
Analysis, Review and Development of a Conceptual Model, based on Class Diagrams as a Component of UML, Focused on Industrial Automation
AUTHOR(S):Erik F. Méndez Garcés, Gabriela M. Mafla, Francisco Reyes
- Views: 527 hit(s) Pub. Date: 14 May 2019
Estimating of Analysis Results for Structures with Linear Base Isolation Systems using Artificial Neural Network Model
AUTHOR(S):Melda Yucel, Seda Öncü-Davas, Sinan Melih Nigdeli, Gebrail Bekdas, Selçuk Sevgen
- Views: 598 hit(s) Pub. Date: 04 December 2018
Design of an Augmented Automatic Choosing Control by Weighted Gradient Optimization Automatic Choosing Functions for Nonlinear Systems
- Views: 540 hit(s) Pub. Date: 22 November 2018
Integration of Low-Cost Vision System with the Fanuc M-1ia Robot for Sorting and Assembly Operations
AUTHOR(S):L. Van Der Westhuizen, I. A. Gorlach
- Views: 649 hit(s) Pub. Date: 25 September 2018
Application of Nonlinear Autoregressive Neural Network with Exogen for Modeling Demographic Dynamics in Large Urban Agglomeration
AUTHOR(S): Dmitry Tarasov, Alexander Sergeev, Ashat Sydikhov
- Views: 844 hit(s) Pub. Date: 12 April 2018
AUTHOR(S): Houda Barbouch, Abderraouf Khemiri, Nahla Khraief, Safya Belghith
- Views: 839 hit(s) Pub. Date: 31 December 2017
Stability Analysis of Photovoltaic Systems Using Krasovskii’s Method Based on The Second Method Of Liapunov
AUTHOR(S): Anbarasi Mp, Jovitha Jerome
- Views: 885 hit(s) Pub. Date: 31 December 2017
Electric Vehicle Speed Control using Three Phase Inverter operated by DSP-based Space Vector Pulse Width Modulation Technique
AUTHOR(S): Saidi Hamza, Noureddinemansour, Midounabdelhamid
- Views: 874 hit(s) Pub. Date: 31 December 2017
Adaptive Neuro-Fuzzy Scheduled Load Frequency Controller for Multi Source Multi Area System Interconnected via Asynchronous Tie-line
AUTHOR(S): K.R.M. Vijaya Chandrakala, S. Balamurugan
- Views: 879 hit(s) Pub. Date: 31 December 2017
AUTHOR(S): Omer Aydogdu, Mehmet Latif Levent
- Views: 849 hit(s) Pub. Date: 29 December 2017
Speed control of switched reluctance motor using genetic algorithm and ant colony based on optimizing PID controller
AUTHOR(S): Hassan El-sayed Ahmed Ibrahim, Mohamed Said Sayed Ahmed, Khaled Mohamed Awad
- Views: 878 hit(s) Pub. Date: 28 November 2017
AUTHOR(S): Tami Y., Melbous A., Guessoum A.
- Views: 898 hit(s) Pub. Date: 20 November 2017
An Augmented Automatic Choosing Control Designed by Extremizing a Combination of Hamiltonian and Lyapunov Functions for Nonlinear Systems
AUTHOR(S): Toshinori Nawata
- Views: 786 hit(s) Pub. Date: 15 November 2017
AUTHOR(S): Baycan Vural, Eser Takmaz, Oguzhan Urhan
- Views: 872 hit(s) Pub. Date: 29 August 2017
AUTHOR(S): V.V. Okolnishnikov, S.V. Rudometov, S.R. Shakirov, S.S. Zhuravlev
- Views: 830 hit(s) Pub. Date: 17 August 2017
AUTHOR(S): Niyonsaba Therence, Uwizeyimana Providence, Ntaryamira Evariste, Akimana Rachelle
- Views: 945 hit(s) Pub. Date: 19 June 2017
AUTHOR(S): Jose Manuel Lopez-Guede, Ana Boyano, Igor Ansoategui, Ekaitz Zulueta, Jose Antonio Ramos-Hernanz
- Views: 895 hit(s) Pub. Date: 15 May 2017
AUTHOR(S): Mohammed A. H. Ali, Musa Mailah, Wan Azhar B. Yussof, Zamzuri Bin Hamedon, Zulkili B. M. Yussof
- Views: 1165 hit(s) Pub. Date: 22 February 2017
Robust Exponential Stability of a Class of Uncertain Lur’e Systems of Neutral Type Bywirtinger-Based Integral Inequality
AUTHOR(S): Nuntawan Jinati, Saovalak Vunpoang, Orathai Saradee, Wajaree Weera
- Views: 1027 hit(s) Pub. Date: 13 December 2016
Design of Neural Predictor for Performance Analysis of Experimental Automated System in Oral Photography of Dental Treatment
AUTHOR(S): Cem A. Gürgan, Sahin Yildirim
- Views: 1011 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Ivaylo Penev, Milena Karova, Mariana Todorova
- Views: 1201 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Rojanee Khummongkol, Masao Yokota
- Views: 1082 hit(s) Pub. Date: 22 September 2016
Method for Optimizing the Number and Precision of Interval-Valued Parameters in a Multi-Object System
AUTHOR(S):Amaury Caballero, Kang Yen, Jose L. Abreu, Aldo Pardo
- Views: 1065 hit(s) Pub. Date: 15 June 2016
Design of Neural Network Based Fuzzy Inference System for Speed Control of Heavy Duty Vehicles with Electronic Throttle Control System
AUTHOR(S):Ikbal Eski, Sahin Yildirim
- Views: 1114 hit(s) Pub. Date: 22 April 2016
The Continuous-Time Hinfinity Model Matching Problem: 1 DOF Static State Feedback with Integral Control Approach
AUTHOR(S):Murat Akin, Tankut Acarman
- Views: 1069 hit(s) Pub. Date: 12 April 2016
New Fuzzy Aggregations. Part III: Application of New FPOWA Operators in the Problem of Political Management
AUTHOR(S): Gia Sirbiladze, Otar Badagadze, Gvantsa Tsulaia
- Views: 1169 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Gia Sirbiladze, Otar Badagadze, Gvantsa Tsulaia
- Views: 1075 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Gia Sirbiladze, Otar Badagadze, Gvantsa Tsulaia
- Views: 1106 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Jose David Rojas, Orlando Arrieta, Ramon Vilanova
- Views: 1137 hit(s) Pub. Date: 16 March 2016
Controllers Comparison to Stabilize a Two-Wheeled Inverted Pendulum: PID, LQR and Sliding Mode Control
AUTHOR(S): Juan Villacres, Michelle Viscaino, Marco Herrera, Oscar Camacho
- Views: 1342 hit(s) Pub. Date: 16 March 2016
Prof. George Vachtsevanos, Georgia Institute of Technology, Atlanta, Georgia, USA
Members of the Editorial Board
|Prof. Wasfy B. Mikhael, IEEE Fellow, Vice President IEEE Circuits and Systems,University of Central Florida, Orlando, USA|
|Prof. Pierre Borne, IEEE France Section Chair, IEEE Fellow, IEEE/SMC Past President, Ecole Centrale de Lille, France|
|Prof. Daniel Kammen, University of California, Berkeley, USA|
|Prof. David A. Johnson, University of Waterloo, CanadaProf. D. Subbaram Naidu, IEEE Fellow, Idaho State University, USA|
|Prof. Panos M. Pardalos, Distinguished Professor of Industrial and Systems Engineering, University of Florida, USA|
|Prof. Jan Awrejcewicz, Technical University of Lodz, Lodz, Poland|
|Prof. Imre J. Rudas, Obuda University, Budapest, Hungary|
|Prof. Carla Pinto, Polytechnic of Porto, Porto, Portugal|
|Prof. Hung-Yuan Chung, National Central University, Taiwan|
|Prof. Dimitrios A. Karras, Sterea Hellas Institute of Technology, Greece|
|Prof. Elbrous M. Jafarov, Istanbul Technical University, Istanbul, Turkey|
|Prof. Tadeusz Kaczorek, IEEE Fellow, Warsaw University of Technology, Poland|
|Prof. Yuriy S. Shmaliy (IEEE Fellow), Universidad de Guanajuato, MEXICO|
Aims and Scope
The International Journal of Control Systems and Robotics is an open access journal. The goal of this journal is to provide a platform for academicians, researchers and practitioners all over the world to promote, share, and discuss various new issues and developments in all areas of Control Systems and Robotics. Manuscripts are subject to a rigorous and fair peer-review process. Accepted papers will appear online within 3-4 weeks after their submission. The journal publishes papers including but not limited to the following topics:
Circuits and Electronics for Control, Electrical and Electronic Measurement, Large Scale Systems, Hierarchical Control, Hybrid Systems, Digital Control, Fuzzy Systems and Fuzzy Control, Neural Networks and Neural Control, Genetic Algorithms and Evolutionary Control, Intelligent Control, Non-linear Systems and Non-Linear Automatic Control, Sliding Mode Control, Differential Geometry methods in non-linear control, Adaptive Control, Robust Control, Optimal Control, Stochastic Control, Satellite Systems Control, Industrial Control, CAD/CAM systems, Manufacturing Systems Control, Man-Machine Interaction, Cybernetics, Chemical processes control, Multivariable Control, Multirate Control, Parallel and Distributed Systems, Decentralized Control, Real-time Control, Human-Machine Systems and Cybernetics, Modeling, Simulation, Optimization Problems in Control Engineering, Decision Support Systems, Failure of Systems, Fault Tolerance, Diagnostics, Machine Learning, Knowledge Acquisition, Virtual Reality for Automation, Microprocessors, Embedded Systems, Geometric modeling and Fractals, Financial Aspects in Control Engineering, Control of Large Systems via Internet, Control Education, Automation in Biology, Automation in Medicine, Automation in Chemical Engineering, Machines and Mechanical Engineering, Control in Agriculture, Control in Business, Management and Economics, Control in Social Sciences, Applications in Astronomy (telescopes), Signal Processing Systems for Control, Application in Underwater Systems and Oceanic Engineering, Unmanned Vehicles, Artificial Man, Philosophical Aspects of Control, Instrumentation and Measurement, Sensors, Data and Knowledge Acquisition, Industrial Measurement, Electronics, VLSI for Manufacturing Systems, Supervision, Diagnosis and Man-Machine Interaction,, Flexible Structures, Modeling and Model Reduction, Production Planning, Scheduling and CIME, Quintitative methods, Transportation Systems, Environmental Engineering, Water and Gas Systems, Decision Support Systems, Large Scale manufacturing processes, Industrial Control, Complex Systems, Chemical Industry, Oil Industry, Car Industry, Mechatronics, Power Systems, Aerospace and Naval Applications, Modelling, analysis and simulation, Kinematics, Dynamics and Control of robots, Robotics materials, Robotics languages, Human-Robot Interfaces, Motion and path planning, Manipulation and Grasping, Legged and Whiled Robots, Discrete Event Dynamics Systems, Petri Nets, Distributed Robotics Systems, Cellular and Biologically Inspired Robots, Sensor Design, Integration and Fusion, Personal and Service Robots, Space and underwater Robots, Teleoperation, Telerobotics, Network Robotics, Nanotechnologies in Robotics, Communication problems in robotics, Mechatronics, Electronics for robotics systems, Complex architectures, Neural Networks, Fuzzy logic and Evolutionary Computation in Robots, Robot Vision, Man-machine systems, Cybernetics, Bio-cybernetics, Artificial life, Remote sensing, Industrial Applications
1. Open Special IssuesAt the moment we have no open Special Issue
2. Special Issue Guidelines: Every proposal for special issue must be sent to us and should include the following
The journal for which the Special Issue is intended * A suggested title for the Special Issue * Proposed Aims and Scope * A list of Guest Editors who will join the Lead Guest Editor in managing the Special Issue, including their names, emails, affiliations, and a short biography (one paragraph) of each of the Guest Editors * A proposed timeline and schedule which includes: * Deadline for submission (6 months from the initial Call-for-Papers) * First round of review (3 months after submission deadline) * Tentative publication date (3 months after the first round of review) All proposals are subject to approval by the journal following a discussion of the proposed Special Issue among the journals Editorial Board. If approved, a Call-for-Papers for the Special Issue will be issued and posted online. Each proposal will be evaluated by three independent experts according to the following Criteria * Relevance to the Journal * Scientific - Technical Originality, * Scientific content And advances beyond the State-Of-The-Art * Potential Impact and tnterest for the readers The Guest Editors cannot act as reviewers for the Special Issues manuscripts. This is to ensure a high-quality, fair, and unbiased peer-review process of every manuscript submitted to the journal, since any manuscript must be recommended by one or more (usually two or more) external reviewers and the Guest Editor before acceptance for publication. The name of the Guest Editor recommending the manuscript for publication is published with the manuscript to indicate and acknowledge their invaluable contribution to the peer-review process and the indispensability of their contributions to the running of the journals. The peer-review process is single blinded; that is, the reviewers know who the authors of the manuscript are, but the authors do not have access to the information of who the peer reviewers are. Every journal published by Hindawi has an acknowledgment page for the researchers who have performed the peer-review process for at least one manuscript in the past year. Without the significant contributions made by these researchers, the publication of the journal would not be possible.
3. Published Special IssuesAt the moment we have no open Special Issue
Time for Publication
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
International Institute Of Organized Research (I2OR)
Polish Scholarly Bibliography (PBN)
Scientific Indexing Services (SIS)
Eurasian Scientific Journal Index
IARAS sends each paper to 3 independent reviewers, experts in the area of the paper. So, each paper will be evaluated by three independent experts according to the following Criteria 1) Relevance to the Journal 2) Scientific - Technical Originality, Potential Impact and Interest for the audience 3) Scientific/Technical Content and Advances beyond The State-Of-The-Art 4) Quality of the Presentation, clarity of the Content 5) Comments for the authors The reviewers are going to indicate their familiarity with the paper's subject, evaluate the paper along the aforementioned criteria. Finally, the Editor-in-Chief or a Member of the Editorial Board will decide whether a paper will be accepted or not. Our Score System will classify the papers as follows * Publish as it is * Consider after Minor Changes * Consider after Major Changes * Reject If the Editor recommends Publish as it is the manuscript will undergo a final check by the journals editorial office in order to ensure that the manuscript and its review process adhere to the journals guidelines and policies. Once this is done, the authors will be notified of the manuscripts acceptance, and the manuscript will appear in the Articles in Press section of the journals website. If the Editor recommends Consider after Minor Changes, the authors are notified to prepare and submit a final copy of their manuscript with the required minor changes suggested by the reviewers. The Editor reviews the revised manuscript after the minor changes have been made by the authors. Once the Editor is satisfied with the final manuscript, the manuscript can be accepted. If the Editor recommends Consider after Major Changes, the recommendation is communicated to the authors. The authors are expected to revise their manuscripts in accordance with the changes recommended by the reviewers and to submit their revised manuscript in a timely manner. Once the revised manuscript is submitted, the Editor can then make an editorial recommendation which can be Publish Unaltered, Consider after Minor Changes, or Reject. If the Editor recommends rejecting the manuscript, the rejection is immediate. Also, if the majority of the reviewers recommend rejecting the manuscript, the rejection is immediate. All journals published by IARAS are committed to publishing only original material, i.e., material that has neither been published elsewhere, nor is under review elsewhere. IARAS as a participant of CrossCheck uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. Manuscripts that are found to have been plagiarized from a manuscript by other authors, whether published or unpublished, will incur plagiarism sanctions.
IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct.
The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow")
Terms of Collaboration
1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals.
2). After the Review process is completed by the Assoc. Editor and the Reviewers, it is no longer allowed for the authors to withdraw their paper.
3). PEER REVIEW: All submitted papers are subject to strict peer-review process by at least three international reviewers that are experts in the area of the particular paper. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. The possible decisions include acceptance, acceptance with revisions, or rejection.
4). If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted.
5). Rejected articles will not be re-reviewed.
6). Articles may be rejected without review if they are obviously not suitable for publication.
7). The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism.
8). The reviewers evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.
9). The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
10). Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.
11). Peer review assists the publisher in making editorial decisions and through the editorial communications with the experts form the scientific board ant the author may also assist the author in improving the paper.
12). Manuscripts received for review are treated as confidential documents and are reviewed by anonymous staff.
13). A reviewer should also call to the publisher's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.
14). Authors of contributions and studies research should present an accurate account of the work performed as well as an objective discussion of its significance.
15). A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable.
16). The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
17). Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
18). Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
19). All sources of financial support for the project should be disclosed.
20). Authors should make themselves aware of the paper processing charges and registration fees of the publication they submit a paper to by reading the respective sections.
21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..
Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is single blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and decisions letters of manuscripts are sent within 4 weeks. The editors of this journal take the responsibility to enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal take such publishing ethics issues very seriously and are trained to proceed in such cases with a zero tolerance policy. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Authors wishing to publish their papers in the Journal are asked to abide to the following rules: a) Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission. b) Authors should accurately present their research findings and include an objective discussion of the significance of their findings. c) Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work. d) Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication. f) Simultaneous submission of manuscripts to more than one journal is not tolerated. Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted). g) If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken. h) Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license. * Plagiarism, data fabrication and image manipulation are not tolerated. * Plagiarism is not acceptable in IARAS submissions. * Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source. Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited. If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
International Journal of Control Systems and Robotics currently has an acceptance rate of 30%.
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader Food and Nutrition Science - An International Journal: 150 EUR/paper (*) (*) 150 EUR/paper is the publication fee if you use Bank Deposit.
will ever have to buy a subscription or pay any pay-per-view fees to access articles in the electronic version of the journal.
There is hence no revenue at IARAS neither from the sale of subscriptions to the electronic version of the journal nor from pay-per-view fees.
Yet, the online publication process does involve costs including those pertaining to setup and maintenance of the publication infrastructure, routine operation of the journal, processing of manuscripts through peer-reviews, editing, publishing, maintaining the scholarly record, and archiving. To cover these costs, the journals depends on Publication Fees. Publication Fees are due when a manuscript has been accepted for publication.
International Journal of Agricultural Science: 150 EUR/paper (*)
International Journal of Applied Physics: 150 EUR/paper (*)
International Journal of Biochemistry Research: 150 EUR/paper (*)
International Journal of Biology and Biomedicine: 150 EUR/paper (*)
International Journal of Chemistry and Chemical Engineering Systems: 150 EUR/paper (*)
International Journal of Circuits and Electronics: 150 / paper
International Journal of Communications: 150 EUR/paper (*)
International Journal of Computers: 150 EUR/paper (*)
International Journal of Control Systems and Robotics: 150 EUR/paper (*)
International Journal of Cultural Heritage: 150 EUR/paper (*)
International Journal of Economics and Management Systems: 150 EUR/paper (*)
International Journal of Education and Learning Systems: 150 EUR/paper (*)
Journal of Electromagnetics: 150 EUR/paper (*)
International Journal of Environmental Science: 150 EUR/paper (*)
International Journal of Instrumentation and Measurement: 150 EUR/paper (*)
International Journal of Internet of Things and Web Services: 150 EUR/paper (*)
International Journal of Mathematical and Computational Methods: 150 EUR/paper (*)
International Journal of Mechanical Engineering: 150 EUR/paper (*)
International Journal of Medical Physiology: 150 EUR/paper (*)
International Journal of Power Systems: 150 EUR/paper (*)
International Journal of Renewable Energy Sources: 150 EUR/paper (*)
International Journal of Signal Processing: 150 EUR/paper (*)
International Journal of Theoretical and Applied Mechanics: 150 EUR/paper (*)
International Journal of Tourism: 150 EUR/paper (*)
International Journal of Transportation Systems: 150 EUR/paper (*)
International Journal of Veterinary Medicine: 150 EUR/paper (*)
If you want to use Credit Card, it is 158 EUR due to conversions in local
currency and bank commissions.
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader
Food and Nutrition Science - An International Journal: 150 EUR/paper (*)
(*) 150 EUR/paper is the publication fee if you use Bank Deposit.
So far for the "International Journal of Control Systems and Robotics"
we have used the following Reviewers
Valentina E. Balas
Eustache Muteba Ayumba
Hassan Elsayed Ahmad Ibrahim
Kavikumar Jacob Kavikumar
Kok Mun Ng
Lungu Mihai Aureliu
Mohd Ashraf Ahmad
Mostafa Mostafa Abutaleb
Prof Harry Coomar Shumsher Rughooputh
Rabie A. Ramadan Rabie
Dr. Rakesh K. Arya
Saheeb Ahmed Kayani
Vipul Arvindbhai Shah
Cheng Yee Low
Prof. Dhaval Vyas
Krishna Kumar Sharma
Imre J. Rudas
Collin Howe Hing Tang
Syed Saad Azhar Ali
Muhammad Naufal Mansor
Carlos E. Formigoni
Submit a Manuscript
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission
Current e-mail addresses must be provided for all suggested reviewers.
Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission
If for some technical reason online submission is not successful, the author can submit the manuscript to firstname.lastname@example.org