Articles
Articles
-
Railway System ‘Vehicle-Track’: Relation Between the Spectral Density of Excitation vs of Response
- Information
- Views: 142 hit(s) Pub. Date: 26 March 2024
AUTHOR(S): Konstantinos Sp. Giannakos -
A Fuel Oil Production Plant Through Pyrolysis of the Waste High-Density Polyethylene
- Information
- Views: 353 hit(s) Pub. Date: 31 December 2023
AUTHOR(S): Ilirjan Malollari, Redi Buzo, Alma Peposhi -
The Effect of Using Lauric Acid on Cooler Boxes and Peltier as a Media Cooler Box
- Information
- Views: 262 hit(s) Pub. Date: 13 November 2023
AUTHOR(S):Ahmad Fauzi, Dody Irawan, Fuazen, Raudhatul Fadhilah -
Effect of Cooling Using Added Peltier Ice Pack on Cool Box
- Information
- Views: 304 hit(s) Pub. Date: 13 November 2023
AUTHOR(S): Atma Redho, Doddy Irawan, Eko Julianto, Raudhatul Fadhilah -
The Dynamics of Cavitation Bubble Collapse Impacting Fine Particles Near Spherical Wall
- Information
- Views: 247 hit(s) Pub. Date: 19 September 2023
AUTHOR(S):Jamal-Deen Kukurah, Anthony Akayeti, Joseph Sekyi-Ansah, James Kwasi Quaisie, Abdul-Hamid Mohammed, Philip Yamba, Bismark Addai -
Redesign and Simulation of a Hammer Mill to Minimize Consume of Iron Filings
- Information
- Views: 438 hit(s) Pub. Date: 21 July 2023
AUTHOR(S):Abdul-Hamid Mohammed, Kwabena Offeh Gyimah, Philip Yamba, Jamal-Deen Kukurah, Joseph Sekyi-Ansah, Anthony Akayeti, James Kwasi Quaisie,... -
A Survey On Heat Pipe Heat Recovery Systems
- Information
- Views: 294 hit(s) Pub. Date: 04 July 2023
AUTHOR(S):Babli Lodhi, Dr. Shrihar Pandey -
Effect of Producing Natural Water by Dehumidification of Atmospheric Air Using Conventionally Designed Atmospheric Water Generator (AWG) in a Humidified Area of Sultanate of Oman
- Information
- Views: 257 hit(s) Pub. Date: 03 July 2023
AUTHOR(S):Majid Sulaiyam Ghaneem Al Duwaiki, Mohammed Khamis Salim Alhashemi, S. Janakiraman -
Hardness and Metallographic Characteristics Analysis of AISI 1040 Steel Utilizing Heat Treatment Processes
- Information
- Views: 389 hit(s) Pub. Date: 09 June 2023
AUTHOR(S):Dwi Purwanto -
A Review on Enhancement of Developing Noise-less Suction Muffler for Reciprocating Compressor
- Information
- Views: 372 hit(s) Pub. Date: 01 June 2023
AUTHOR(S):K. Santosh Kumar, K. Kishore, P. Usha Sri -
Effects Of Various Temperatures On Impact Strength, Hardness And Metallography In ST 37 Steel For Plates By Heat Treatment And Quenching Processes
- Information
- Views: 487 hit(s) Pub. Date: 22 March 2023
AUTHOR(S):Dwi Purwanto -
Base on Solid-works Design of Compact High Efficient Solar Water Heater
- Information
- Views: 514 hit(s) Pub. Date: 14 March 2023
AUTHOR(S):Ramcy Saah Stubblefield -
Experimental Study and Analysis of the Effect of Phase Change Material (PCM) Mass Variation on Solar Still Desalination Equipment
- Information
- Views: 549 hit(s) Pub. Date: 24 January 2023
AUTHOR(S): Haidir Ali, Doddy Irawan, Fuazen, Raudhatul Fadhilah -
Effect of Using Phase Change Material (PCM) Paraffin Wax and Lauric Acid as Heat Storage on Water Productivity in Solar Desalination
- Information
- Views: 442 hit(s) Pub. Date: 24 January 2023
AUTHOR(S):Vinsensius Hendrik, Raudhatul Fadhilah, Doddy Irawan, Eko Sarwono -
Design of a Seawater Desalination Device for Laboratory Scale Solar Still Systems with the Addition of PCM (Phase Change Material) as a Heat Storage Material
- Information
- Views: 436 hit(s) Pub. Date: 29 December 2022
AUTHOR(S): Noor Iskandar, Doddy Irawan, Eko Julianto, Raudhatul Fadhilah -
The Effect of Rija-rija Lignocellulose Addition on Compressive Strength and Absorbility of Composite Bricks
- Information
- Views: 415 hit(s) Pub. Date: 29 December 2022
AUTHOR(S): Rio Hartanto, Doddy Irawan, Eko Julianto, Raudhatul Fadhilah -
Effect of Cavitation Water Jet Peening on 8090Al-li Fatigue Life N/cycle
- Information
- Views: 354 hit(s) Pub. Date: 28 December 2022
AUTHOR(S): Joseph Sekyi-Ansah, James Kwasi Quaisie, Stephen Eduku, Philip Baidoo, Philip Yamba, Felix Uba, Enock A. Doudu, Emmanuel Amankwah -
Analysis of Predictive Maintenance in Industry 4.0: A review
- Information
- Views: 553 hit(s) Pub. Date: 02 December 2022
AUTHOR(S): Udai Chandra Jha, R. Jitendra Sai, M. V. B. Krishna Reddy, Abhishek Singh -
Generic Model for Management of Safety of Technical Installations with Small Modular Reactors
- Information
- Views: 503 hit(s) Pub. Date: 02 December 2022
AUTHOR(S):Dana Prochazkova -
New Exact Solutions of Wave and Heat Equations via Andualem and Khan Transform
- Information
- Views: 559 hit(s) Pub. Date: 10 November 2022
AUTHOR(S):Mulugeta Andualem, Ilyas Khan, Atinafu Asfaw -
Comparison of International and European Standards Regarding Energy Management in Industry
- Information
- Views: 439 hit(s) Pub. Date: 07 October 2022
AUTHOR(S):Carina Beermann, Petr Mastny -
Wireless Vehicle Deceleration Speed System (WVDSS)
- Information
- Views: 489 hit(s) Pub. Date: 26 September 2022
AUTHOR(S): Suleiman Q. Abu-Ein -
Analysis and Modeling of a Flexible Manufacturing System based on Petri Nets
- Information
- Views: 536 hit(s) Pub. Date: 09 September 2022
AUTHOR(S):Mohamed Najeh Lakhoua, Jihen El Khaldi, Youssef El Fekih -
The Influence of Dynamics and Vibrational Characteristics on Weldability of Joining Metals Ultrasonically
- Information
- Views: 613 hit(s) Pub. Date: 22 June 2022
AUTHOR(S):Ziad. Sh. Al Sarraf -
About Competitive and Adaptive Control in Manufacturing Process
- Information
- Views: 750 hit(s) Pub. Date: 05 May 2022
AUTHOR(S):Daschievici Luiza, Ghelase Daniela -
Mathematical Modelling and Computer Simulation of the Flow Around a Formula 1 Racing Car
- Information
- Views: 941 hit(s) Pub. Date: 04 April 2022
AUTHOR(S):T. A. Chrysoloras, N. C. Markatos -
Modeling of the Competitive Management Efficiency
- Information
- Views: 506 hit(s) Pub. Date: 23 March 2022
AUTHOR(S):Daniela Ghelase, Luiza Daschievici -
Effect of Packing Profile on Optimisation of Plastic Injection Moulding Process
- Information
- Views: 798 hit(s) Pub. Date: 22 February 2022
AUTHOR(S):Osayoghoghome Peter Aigbogun, Jacob Olaitan Akindapo -
Comparison Between the Evolution of the Wear Rate and the Temperature in the Cutting Area
- Information
- Views: 671 hit(s) Pub. Date: 11 February 2022
AUTHOR(S):Daschievici Luiza, Ghelase Daniela -
Comparison of International and European Standards in the Field of Energy Management
- Information
- Views: 696 hit(s) Pub. Date: 27 January 2022
AUTHOR(S):Carina Beermann -
Comparison Stand Tests and Road tests of brake systems under Various Conditions
- Information
- Views: 617 hit(s) Pub. Date: 31 December 2021
AUTHOR(S):Waleed Momani, Sayel M. Fayyad -
Analysis of the Influencing Factors in the Production of Parts with Nonconformities
- Information
- Views: 669 hit(s) Pub. Date: 08 December 2021
AUTHOR(S):Flavia Fechete -
Mathematical Model for Heat Collector
- Information
- Views: 799 hit(s) Pub. Date: 25 November 2021
AUTHOR(S):Krešimir Orozović, Branko Balon -
Increasing the Efficacity of an Anti-hail Rocket
- Information
- Views: 683 hit(s) Pub. Date: 08 October 2021
AUTHOR(S):Cristina Mihailescu, Marius Radulescu -
Processing of Biogas Industrial Waste – Application in a Manufacturing Unit
- Information
- Views: 730 hit(s) Pub. Date: 28 July 2021
AUTHOR(S):G. Pouliou, A. Vasileiadou, Z. Ziaka, S. Vasileiadis -
Tribological Aspects of the Dynamic and Thermal Phenomena Modelling in the Cutting Process
- Information
- Views: 697 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Daschievici Luiza, Ghelase Daniela -
Thermodynamic Process of an Ideal Heat Transfer Process in a System with a Solar Collector as a Higher Temperature Tank
- Information
- Views: 1010 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Krešimir Orozović, Branko Balon -
On Forced Vibrations Caused by Earthquakes
- Information
- Views: 805 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Anton Bogachov, Felix Sadyrbaev -
Estimate Flutter Speed Half Wing Model of N219 using MSC NASTRAN
- Information
- Views: 685 hit(s) Pub. Date: 11 May 2021
AUTHOR(S):Mirna Sari, Muchamad Bayu Sakti Pratama, Harus L.G -
An approach to the Influence of Fluid Viscosity and the Cutting Parameters in Turning a Carbon Steel Using Surface Methodology
- Information
- Views: 776 hit(s) Pub. Date: 02 April 2021
AUTHOR(S):Kamel Bousnina, Ali Falleh -
Optimization and Prediction of Dilution Percentage in Submerged Arc Welding Process
- Information
- Views: 881 hit(s) Pub. Date: 01 April 2021
AUTHOR(S):S. Praveen, S. Praveen Kumar -
Iiot and Industry 4.0
- Information
- Views: 722 hit(s) Pub. Date: 01 March 2021
AUTHOR(S): Urmila A. Patil, Rajashree D. Patil -
Results of the Analysis of the Effects of Low-sulphur Fuel Oil on the Operation of the Marine Two-stroke Slow-speed Diesel Engine
- Information
- Views: 789 hit(s) Pub. Date: 23 February 2021
AUTHOR(S):Ratko Bozic -
Behavioral Relationship of the Market qnd Manufacturing System
- Information
- Views: 808 hit(s) Pub. Date: 28 December 2020
AUTHOR(S): Ghelase Daniela, Daschievici Luiza -
Reiforcement learning in Cognitive Engineering of Manufacturing processes
- Information
- Views: 751 hit(s) Pub. Date: 28 December 2020
AUTHOR(S): Daschievici Luiza, Ghelase Daniela -
Development of Polymer-matrix Composite Material Using Banana Stem Fibre and Bagasse Particles for Production of Automobile Brake Pad
- Information
- Views: 975 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Akindapo Jacob Olaitan, Agbo Joseph Chidome -
Performance Test of Multi Micro-Channel Evaporators for Cooling a High Heat Fluxelectronic Devices
- Information
- Views: 745 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Mohamed Karim, A.M.K El-Ghonemy, Eldesouki I. Eid -
Study on the Polyhedral Triangular Tessellation of the Sphere
- Information
- Views: 882 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Fechete Flavia -
Ceramic Coatings via Friction Stir Processing: Challenges and Drawbacks for Industrial Applications
- Information
- Views: 810 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Milena Folea, Mircea Anton Vasiloni -
Performance Evaluation and Off Design Analysis of ihe HPAnd LP Feed Water Heaters on a 3x135 MW Coal Fired Power Plant
- Information
- Views: 844 hit(s) Pub. Date: 27 November 2020
AUTHOR(S):Jameson R. Almedilla, Leonel L. Pabilona, Eliseo P. Villanueva -
Performance Optimization of Centrifugal Fan with Ducts through CFD Simulation of Impeller Design
- Information
- Views: 994 hit(s) Pub. Date: 25 November 2020
AUTHOR(S): L. Umamaheswararao, V. Chandrasimha -
A Comparative Study for Different Shapes of Airfoils
- Information
- Views: 1308 hit(s) Pub. Date: 22 December 2019
AUTHOR(S): Mohamed Adel -
Using of Simple Scheduling Rules in Decision Process
- Information
- Views: 1288 hit(s) Pub. Date: 30 August 2019
AUTHOR(S):Ioan Ghimbaseanu -
Optimization Problem of Local Constraints for Coherent Topology Behavior
- Information
- Views: 1120 hit(s) Pub. Date: 30 August 2019
AUTHOR(S):Ioan Enescu -
Heat Distribution on Thin Plates with Point Sources
- Information
- Views: 1292 hit(s) Pub. Date: 23 August 2019
AUTHOR(S):Imam Solekhudin -
Finishing and Strengthening of Internal Cylindrical Surfaces by Vibratory-Rolling
- Information
- Views: 1155 hit(s) Pub. Date: 23 August 2019
AUTHOR(S):Badea Lepadatescu -
Flyback Converter of Electrical Discharge Machining Power Supply: Application to Surface Texturing
- Information
- Views: 1314 hit(s) Pub. Date: 11 April 2019
AUTHOR(S):Nazriah Mahmud, Azli Yahya, Eko Supriyanto -
A Visualization of Flow Patterns During Adiabatic Two-Phase Flow of Air-Water Mixtures in Microchannel
- Information
- Views: 1337 hit(s) Pub. Date: 22 January 2019
AUTHOR(S):Napaphat Prathansong -
Experimental Evaluation of the Performance of Heat Pipes with Nanoparticle Layer
- Information
- Views: 1411 hit(s) Pub. Date: 18 December 2018
AUTHOR(S):Tomio Okawa, Menglei Wang, Koji Enoki -
Study of Axial Force and Torque at Drilling on ZTAL4Cu1 Alloy
- Information
- Views: 1349 hit(s) Pub. Date: 03 December 2018
AUTHOR(S):Badea Lepadatescu -
Study Regarding the Accuracy of Measurement by Factors as Repeatability and Reproducibility
- Information
- Views: 1397 hit(s) Pub. Date: 22 November 2018
AUTHOR(S):Ioan Ghimbaseanu -
3D CFD Model of Thermogasdynamic State of the New Safe Confinement of Chernobyl NPP
- Information
- Views: 1616 hit(s) Pub. Date: 25 October 2018
AUTHOR(S):Pavlo Krukovskyi, Vladyslav Oliinyk, Mikhail Metel -
Increasing of Carbon Steel Performances by Superficial Heat Treatments in Plasma
- Information
- Views: 1608 hit(s) Pub. Date: 24 September 2018
AUTHOR(S): Bolfa Traian Eugen -
Studies Regarding Finishing and Work Hardening the Internal Surfaces by Radial Vibratory Rolling Method
- Information
- Views: 1564 hit(s) Pub. Date: 24 September 2018
AUTHOR(S): Badea Lepadatescu, Anisor Nedelcu -
Experimental Characterization of the Heat Transfer in a Latent Direct Contact Thermal Energy Storage with One Nozzle in Labor Scale
- Information
- Views: 2398 hit(s) Pub. Date: 25 August 2018
AUTHOR(S): Stefan Krimmel, Anastasia Stamatiou, Jörg Worlitschek, Heimo Walter -
One Dimensional Mathematical Model for a Thermocline Energy Storage Device
- Information
- Views: 1681 hit(s) Pub. Date: 25 August 2018
AUTHOR(S): Heimo Walter, Natalie Strohmayer, Michael Hameter -
Biosensor Based on Total Internal Reflection Imaging Ellipsometry
- Information
- Views: 1602 hit(s) Pub. Date: 11 July 2018
AUTHOR(S): Yu Niu, Gang Jin -
The guidelines in determining the precision and amount of variation of gauging systems used in the manufacturing process
- Information
- Views: 1477 hit(s) Pub. Date: 31 May 2018
AUTHOR(S): Simona Duicu -
Studies regarding the ways of estimation the reliability of cutting tools and handling stress constraints
- Information
- Views: 1410 hit(s) Pub. Date: 31 May 2018
AUTHOR(S): Ioan Ghimbasanu -
Proper Arrangement of Reinforcing Ribs for Elimination of Thermal Deformations in Metallurgical Products
- Information
- Views: 1767 hit(s) Pub. Date: 20 April 2018
AUTHOR(S): Matarneh M.E., Al Quran F.M., Chigarev V. V., Ioza A. V -
Examination of Shape Error of Outer Cylindrical Surfaces Machined by Environmentally Friendly Way
- Information
- Views: 1593 hit(s) Pub. Date: 19 April 2018
AUTHOR(S): Gyula Varga, Tibor Puskás, István Debreceni -
Decision-making in procedure selection on the basis of efficiency in machining hardened surfaces
- Information
- Views: 1696 hit(s) Pub. Date: 18 April 2018
AUTHOR(S): Janos Kundrak, Viktor Molnar, Istvan Deszpoth -
Theoretical and Experimental Analysis of the Effect of Chip Size Ratio on Cutting Forces in Face Milling of Steel
- Information
- Views: 2054 hit(s) Pub. Date: 18 April 2018
AUTHOR(S): János Kundrák, Angelos P. Markopoulos, Tamás Makkai, Antal Nagy -
Modeling of Unsteady Two-Phase Flow over a Stretching Sheet with Analysis of Heat and Mass Transfer due to Electrification of Particles and Viscous Dissipation
- Information
- Views: 1812 hit(s) Pub. Date: 16 April 2018
AUTHOR(S): Aswin Kumar Rauta, Saroj Kumar Mishra -
Buoyancy-driven Thermal and Flow Characteristics in Gaps between Two Glasses of Multi-framed Window
- Information
- Views: 1507 hit(s) Pub. Date: 11 April 2018
AUTHOR(S): Juhee Lee, Younjun Lee -
Approximate Solution for Magnetohydrodynamics Fluid Flow between Two Circular Discs
- Information
- Views: 1661 hit(s) Pub. Date: 11 April 2018
AUTHOR(S): Fatma Ayaz, Hayriye Yetim, Nilay Akgonullu Pirim -
Mechanical Properties of CFRP/EVA Composites According to Lamination Ratio
- Information
- Views: 1871 hit(s) Pub. Date: 27 December 2017
AUTHOR(S): Sun-Ho Go, Seong-Min Yun, Hee-Jae Shin, Jang-Ho Lee, Lee-Ku Kwac, Hong-Gun Kim -
Ensemble Selection in Expensive Optimization Problems
- Information
- Views: 1818 hit(s) Pub. Date: 27 December 2017
AUTHOR(S): Yoel Tenne -
Reconstructed gasification technology
- Information
- Views: 1836 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Pavel Friedel, Jakub Čespiva -
An Improved Method for Forming Large Diameter Pipes with an Enlarged Wall Based on the UOE Process
- Information
- Views: 1595 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): Yu. B. Chechulin, A. Kichka -
Boundary layer and mesh refinement effects on aerodynamic performances of horizontal axis wind turbine (HAWT)
- Information
- Views: 1953 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): Younes El Khchine, Mohammed Sriti -
Heat Transfer and Pressure Drop Characteristics in a packed bed Solar Air Heater
- Information
- Views: 1801 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): L. Varshney, Rameshwar Kumar Singh -
Reliability prediction of tensile strength of a glass fiber reinforced polyamide using response surface method
- Information
- Views: 1628 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): Mohamed Makki Mhalla, Ahmed Bahloul, Chokri Bouraoui -
Modeling and Simulation of the Competitiveness of Manufacturing Systems
- Information
- Views: 1712 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Ghelase Daniela, Daschievici Luiza, Ioana Diaconescu -
Modeling and Simulation in Machining Processes
- Information
- Views: 1975 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Daschievici Luiza, Ghelase Daniela, Ioana Diaconescu -
Special Lubrication Problems for Bearings Running at High Speed
- Information
- Views: 1934 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Traian Eugen Bolfa -
Study of the Instability due the Different Position of an Aileron
- Information
- Views: 1795 hit(s) Pub. Date: 25 September 2017
AUTHOR(S): Oana Dumitrescu, Bogdan Gherman, Valeriu Drăgan -
Industrial Process Steam-Consumption Prediction through an Artificial Neural Networks (ANNS) Approach
- Information
- Views: 2202 hit(s) Pub. Date: 23 August 2017
AUTHOR(S): Fitsum Bekele Tilahun, Ramchandra Bhandari, Menegesha Mamo -
Cutting Tool Reliability Testing and Data Proceeding
- Information
- Views: 1976 hit(s) Pub. Date: 22 June 2017
AUTHOR(S): Stamate Valentin -
Some Considerations Regarding the Influence of Coal Quality on the Environment
- Information
- Views: 1800 hit(s) Pub. Date: 22 June 2017
AUTHOR(S): Bolfa Traian Eugen -
Studying Fluid Mechanics for Better Understanding Simulation Technologies. A Special Approach for Maritime Universities
- Information
- Views: 2008 hit(s) Pub. Date: 22 June 2017
AUTHOR(S): Dumitru Dinu -
One Application of the ENFR Fracture Test: Coupon Testing for Wind Turbine Blade Materials
- Information
- Views: 1822 hit(s) Pub. Date: 15 May 2017
AUTHOR(S): Ana Boyano, Igor Ansoategui, Unai Fernandez-Gamiz, Ekaitz Zulueta, Jose Manuel Lopez-Guede, Faustino Mujika -
Study On The Turning Process Of High Temperature Nickel‐based Superalloy Inconel 718
- Information
- Views: 1578 hit(s) Pub. Date: 25 April 2017
AUTHOR(S): Mussokulov Nursulton, Dr.Wang Zhenhua -
Progress of Solution Methods Based Boundary Layers of Turbulent Flow
- Information
- Views: 1953 hit(s) Pub. Date: 24 April 2017
AUTHOR(S): Sabah Tamimi -
Discrete Model of Hydraulic Fracture Crack Propagation in Media with Filtration
- Information
- Views: 1660 hit(s) Pub. Date: 24 April 2017
AUTHOR(S): Sergey Kanaun, Daniel Morales -
Investigation of Neural Classifiers for Recognition of Micro Components of Solar Concentrators
- Information
- Views: 1557 hit(s) Pub. Date: 28 March 2017
AUTHOR(S): Tetyana Baydyk, Ernst Kussul, Gengis Kanhg Toledo-Ramirez -
Low-temperature Mechanical Behavior of Reinforced Polyurethane Foam
- Information
- Views: 1903 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Jeong-Hyeon Kim, Seul-Kee Kim, Sungkyun Park, Kang Hyun Park, Jae-Myung Lee -
Effect of Loading Direction and Temperature on Compressive Behavior of Compressed Laminated Wood in LNG/LPG Tank Supporter
- Information
- Views: 1917 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Dong-Man Ryu, Jong-Hwan Kim, Jae-Myung Lee -
Characteristics of Heat Transfer of Buoyancy-driven Rectangular Cavity with Various Aspect Ratios
- Information
- Views: 1889 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Juhee Lee -
Numerical Quantification of Thermal Properties of Insulation Coating
- Information
- Views: 1782 hit(s) Pub. Date: 04 January 2017
AUTHOR(S): Jozef Kacur, Michal Kopcok, Jozefa Lukovicová, Alena Struhárová -
Smart Materials For The Internal Vibro-Acoustic Performance Improvement In Turboprop Aircraft
- Information
- Views: 1844 hit(s) Pub. Date: 14 December 2016
AUTHOR(S): Massimo Viscardi, Maurizio Arena, Giuseppina Barra, Liberata Guadagno -
Testing of Hydraulically Driven Ramming Device
- Information
- Views: 1895 hit(s) Pub. Date: 14 December 2016
AUTHOR(S): Jiri Balla, Zbynek Krist, Cong Ich Le -
Structural Analysis of the Forming Press for Airplane Stringers
- Information
- Views: 1957 hit(s) Pub. Date: 14 December 2016
AUTHOR(S): Chae Yoon Yang, Hyun Ho Kim, Chul Ki Song -
Effect of the Changing of the Feed on Surface Topography at Face Milling
- Information
- Views: 1854 hit(s) Pub. Date: 24 October 2016
AUTHOR(S): Csaba Felho, Janos Kundrak -
A Study of Micro to Nano Structure Fine Solid Line Printing for Graphene Ink by Micro-flexographic Printing Method
- Information
- Views: 2075 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Suhaimi Hassan, Mohd Sallehuddin Yusof, Mohd Idris Maksud, Muhamad Nor Nodin -
Use of Finite Element Method (FEM) to Determine Spatio-Temporal Evolution of Pollutants in River-Type Systems
- Information
- Views: 1832 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Galina Marusic, Calin Ciufudean, Diana Marusic -
Thermal Performance Comparison of Ejecting Thermosyphon Heat Pipe with Conventional Thermosyphon Heat Pipe
- Information
- Views: 1853 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Abdullah Yildiz, Mustafa Ali Ersöz, Kadir Gündogan -
Block Nested Refinement and Numerical Estimation for Sudden Expansion Pipes in Various Step Angles
- Information
- Views: 1884 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Christina G. Georgantopoulou -
Teenage Cyclist - Pick Up Crash by Multibody Simulation; HIC Evaluation and Comparison with Previous Results
- Information
- Views: 1816 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Filippo Carollo, Vincenzo Naso, Gabriele Virzi’ Mariotti -
Active Vibration Control of a Mounting Bracket for Automotive Gearboxes
- Information
- Views: 2010 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):D. Magliacano, M. Ciminello, I. Dimino, M. Viscardi, A. Concilio -
Techno-Economic Analysis of Ranque-Hilsch Vortex Tube Aided Hybrid Cooling and Drying System
- Information
- Views: 2132 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Merve Senturk Acar, Halit Arat, Oguz Arslan -
Analysis of the Operational Reliability of the Rotary Cup Burner of a Marine Boiler
- Information
- Views: 1871 hit(s) Pub. Date: 27 April 2016
AUTHOR(S):Goran Kovacevic, Josko Dvornik, Srdan Dvornik -
Control of Autonomous Underwater Vehicles using Neural Network Based Robust Control System
- Information
- Views: 1905 hit(s) Pub. Date: 22 April 2016
AUTHOR(S): Ikbal Eski, Sahin Yildirim -
A Measurement Practice for Thermal Characteristics of Porous Mediums
- Information
- Views: 1779 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Melda Ozdinc Carpinlioglu, Ozkan Kirec -
Analysis on Flow Characteristic According to Change of Working Fluid Temperature and Swash Plate Angle in Swash Plate Piston Pump
- Information
- Views: 1798 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Chung-Ho Lee, Jeong-Se Suh -
Proposed of ITS Specification for BRT
- Information
- Views: 1826 hit(s) Pub. Date: 23 March 2016
AUTHOR(S): Cledson Akio Sakurai, Caio Fernando Fontana, Claudio Luiz Marte, Leopoldo Yoshioka, Antonio Gil Da Silva Andrade -
Measurements of 3D Sound Characterisation in an UNESCO Theatre in Italy
- Information
- Views: 1830 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Lamberto Tronchin -
Verification of eCall Unit Parameters to Describe the Traffic Accident Seriousness
- Information
- Views: 1822 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Josef Mik, Jana Kadlecova, Petr Bouchner -
Aggressive and Dangerous Behavior of Car and Motorcycle Drivers in the Czech Republic – Analysis of Floating Cars Records
- Information
- Views: 1758 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Petr Bouchner, Stanislav Novotny -
Results of Inspections of Risk Management Quality in Facilities of Critical Infrastructure
- Information
- Views: 1900 hit(s) Pub. Date: 17 March 2016
AUTHOR(S): Dana Prochazkova, Jan Prochazka -
On Testing of Vehicle Active Suspension Robust Control on An One-Quarter-Car Test Stand
- Information
- Views: 2099 hit(s) Pub. Date: 29 February 2016
AUTHOR(S): Katerina Hyniova
Editorial Board
Editor-in-Chief
Prof. Vincenzo Niola, Departement of Mechanical Engineering for Energetics, University of Naples "Federico II"
Naples, Italy
Members of the Editorial Board
Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
Prof. Ottavia Corbi, University of Naples Federico II, Naples, Italy
Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
Prof. Jiin-Yuh Jang, University Distinguished Prof., ASME Fellow, National Cheng-Kung University, Taiwan
Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Acamedy of Engineering of Korea), Korea
Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
Prof. Ottavia Corbi, University of Naples Federico II, Italy
Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
Prof. Christopher G. Provatidis, National Technical University of Athens, Zografou, Athens, Greece
Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
Prof. Marina Shitikova, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
Prof. J. Quartieri, University of Salerno, Italy
Prof. Marcin Kaminski, Department of Structural Mechanics, Al. Politechniki 6, 90-924 Lodz, Poland
Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
Prof. Moran Wang, Tsinghua University, Beijing, China
Prof. Gongnan Xie, Northwestern Polytechnical University, China
Prof. Ali Fatemi, The University of Toledo, Ohio, USA
Prof. Mehdi Ahmadian, Virginia Tech, USA
Prof. Gilbert-Rainer Gillich, "Eftimie Murgu" University of Resita, Romania
Aims and Scope
Aims and Scope
The "International Journal of Mechanical Engineering" is an open access journal. The goal of this journal is to provide a platform for academicians, researchers and practitioners all over the world to promote, share, and discuss various new issues and developments in all areas of Mechanical Engineering. Manuscripts are subject to a rigorous and fair peer-review process. Accepted papers will appear online within 3-4 weeks after their submission. The journal publishes papers including but not limited to the following topics:
Aerodynamics, Fluid Dynamics, Compressible Flows, Computational Mechanics, Biomechanics, Automotive Engineering, Heat and Mass Transfer, Nanomaterial Engineering, Plasticity Mechanics, Fracture, Geomechanics, Multibody Dynamics, Nonlinear Dynamics, Structural Dynamics, Vibrations, Acoustics, Noise Control, Material Engineering, Transport Phenomena, Manufacturing Process, Mechatronics, Transport phenomena (heat, mass transfer and fluid flows), Mathematical modeling in Mechanical engineering, Mechanical engineering education, Plasticity, Fracture and Damage Mechanics, Mechanics of Nanomaterials, Fluid-Structure Interaction, Damage Identification and Non Destructive Evaluation (NDE), Computational and Experimental Mechanics, Geomechanics and Mechanics of Granular Materials, Flows in Porous Media, Impact and Multibody, Dynamics, Nonlinear Dynamics, Structural Dynamics and Control, Dynamic Instability and Buckling, Vibrations, Acoustics and Noise Control, Manufacturing Processes, Advanced Materials and Smart Structures, Micro ElectroMechanical Systems (MEMS), Mechatronics, Transport Phenomena in Micro/Nanoscale, Aerodynamics and Aeroelasticity, Computational Fluid Dynamics (CFD), Turbulence and Multiphase Flows, Biomechanics and Biomaterials, Surface Engineering and Contact Mechanics, Heat and Mass Transfer
Special Issues
Special Issues
1. Open Special Issues
At the moment we have no open Special Issue
2. Special Issue Guidelines: Every proposal for special issue must be sent to us and should include the following
The journal for which the Special Issue is intended
* A suggested title for the Special Issue
* Proposed Aims and Scope
* A list of Guest Editors who will join the Lead Guest Editor in managing the Special Issue, including their names, emails, affiliations, and a short biography (one paragraph) of each of the Guest Editors
* A proposed timeline and schedule which includes:
* Deadline for submission (6 months from the initial Call-for-Papers)
* First round of review (3 months after submission deadline)
* Tentative publication date (3 months after the first round of review)
All proposals are subject to approval by the journal following a discussion of the proposed Special Issue among the journals Editorial Board. If approved, a Call-for-Papers for the Special Issue will be issued and posted online.
Each proposal will be evaluated by three independent experts according to the following Criteria
* Relevance to the Journal
* Scientific - Technical Originality,
* Scientific content And advances beyond the State-Of-The-Art
* Potential Impact and tnterest for the readers
The Guest Editors cannot act as reviewers for the Special Issues manuscripts. This is to ensure a high-quality, fair, and unbiased peer-review process of every manuscript submitted to the journal, since any manuscript must be recommended by one or more (usually two or more) external reviewers and the Guest Editor before acceptance for publication.
The name of the Guest Editor recommending the manuscript for publication is published with the manuscript to indicate and acknowledge their invaluable contribution to the peer-review process and the indispensability of their contributions to the running of the journals.
The peer-review process is single blinded; that is, the reviewers know who the authors of the manuscript are, but the authors do not have access to the information of who the peer reviewers are. Every journal published by Hindawi has an acknowledgment page for the researchers who have performed the peer-review process for at least one manuscript in the past year. Without the significant contributions made by these researchers, the publication of the journal would not be possible.
3. Published Special Issues
At the moment we have no open Special Issue
Time for Publication
Time for Publication
The average time between submission and final decision is 40 days and the average time between acceptance and publication is 30 days.
Indexes
Indexes
Web of Science (Clarivate Analytics)
There are 421 citations for articles published in this journal, which increase by 45% compared to citations as of December 2021.
Google Scholar
There are 1944 citations for articles published in this Journal as of December 2023 based on the statistics from Google Scholar.
The 2-year Google-based Journal Impact Factor (2-GJIF) is 1.16.
This journal is indexed by the following indexes - databases:
Index Copernicus
Cosmos Impactfactors
Google Scholar
International Institute Of Organized Research (I2OR)
ROAD
Polish Scholarly Bibliography (PBN)
Research Bible
JURN
Scientific Indexing Services (SIS)
Eurasian Scientific Journal Index
EBSCO
Academic Journals Database
AiritiLibrary
Autoritetslister for serier og forlag
Base Search
CALIS
ChaoXing Periodicals
Chemical Abstracts Service (CAS)
Citefactor
CNKI SCHOLAR
Cnplinker
COPAC
CQVIP
DTU Findit
Elektronische Zeitschriftenbibliothek(EZB)
GETIT@YALE(Yale University Library)
Harvard Library E-Journals
Infotrieve
i-Scholar
JournalSeek
JournalTOCs
MIAR
National Science and Technology Library(NSTL)
National Science Library, Chinese Academy of Sciences (NSLC)
Open Access Journals Search Engine(OAJSE)
Open Access Library
Open J-Gate
PUBDB DESY Publication Database
Research Bible
ResearchGate
SciFinder
SciLit
SHERPA/RoMEO
Stanford University Libraries
Système Universitaire de Documentation (Sudoc)
Technische Informationsbibliothek (TIB)
The Library of Congress
Ulrich’s Periodicals Directory
WanFang
World Journal Clout Index (2021 STM)
Worldcat
Zeitschriftendatenbank (ZDB)
Review Process
Review Process
IARAS sends each paper to 3 independent reviewers, experts in the area of the paper. So, each paper will be evaluated by three independent experts according to the following Criteria
1) Relevance to the Journal
2) Scientific - Technical Originality, Potential Impact and Interest for the audience
3) Scientific/Technical Content and Advances beyond The State-Of-The-Art
4) Quality of the Presentation, clarity of the Content
5) Comments for the authors
The reviewers are going to indicate their familiarity with the paper's subject, evaluate the paper along the aforementioned criteria. Finally, the Editor-in-Chief or a Member of the Editorial Board will decide whether a paper will be accepted or not.
Our Score System will classify the papers as follows
* Publish as it is
* Consider after Minor Changes
* Consider after Major Changes
* Reject
If the Editor recommends Publish as it is the manuscript will undergo a final check by the journals editorial office in order to ensure that the manuscript and its review process adhere to the journals guidelines and policies. Once this is done, the authors will be notified of the manuscripts acceptance, and the manuscript will appear in the Articles in Press section of the journals website.
If the Editor recommends Consider after Minor Changes, the authors are notified to prepare and submit a final copy of their manuscript with the required minor changes suggested by the reviewers. The Editor reviews the revised manuscript after the minor changes have been made by the authors. Once the Editor is satisfied with the final manuscript, the manuscript can be accepted.
If the Editor recommends Consider after Major Changes, the recommendation is communicated to the authors. The authors are expected to revise their manuscripts in accordance with the changes recommended by the reviewers and to submit their revised manuscript in a timely manner. Once the revised manuscript is submitted, the Editor can then make an editorial recommendation which can be Publish Unaltered, Consider after Minor Changes, or Reject.
If the Editor recommends rejecting the manuscript, the rejection is immediate. Also, if the majority of the reviewers recommend rejecting the manuscript, the rejection is immediate.
All journals published by IARAS are committed to publishing only original material, i.e., material that has neither been published elsewhere, nor is under review elsewhere. IARAS as a participant of CrossCheck uses the iThenticate software to detect instances of overlapping and similar text in submitted manuscripts. Manuscripts that are found to have been plagiarized from a manuscript by other authors, whether published or unpublished, will incur plagiarism sanctions.
Publication Ethics and Publication Malpractice Statement
Publication Ethics and Publication Malpractice Statement
STATEMENT: IARAS is committed to maintaining high standards through a rigorous peer-review together with strict ethical policies. Any infringements of professional ethical codes, such as plagiarism, fraudulent use of data, bogus claims of authorship, should be taken very seriously by the editors with zero tolerance. IARAS follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE Flowcharts for Resolving Cases of Suspected Misconduct. ΙARAS follows strictly these GUIDELINES ON GOOD PUBLICATION PRACTICE (from COPE): https://publicationethics.org/files/u7141/1999pdf13.pdf The submitted manuscript should not have been previously published in any form and must not be currently under consideration for publication elsewhere. Please find further information on Publication Ethics at "Editorial Workflow" (Menu item "Editorial Workflow") 1). COPYRIGHT: By submitting a paper the author understands that its copyright is transferred to IARAS. IARAS may publish it at their discretion and the author may not resubmit it anywhere else, and that includes other IARAS publications. Based on this copyright transfer of the paper, IARAS is entitled to publish the paper to its journals. 19). All sources of financial support for the project should be disclosed. 21). The IARAS Open Access Journals do not require from the authors to submit any copyright form. An author can withdraw a paper until 30 days after the paper submission. After these 30 days no withdrawal is allowed. It is the discretion to the Publisher to publish a paper with or without fees..Terms of Collaboration
2). After the Review process is completed by the Assoc. Editor and the Reviewers, it is no longer allowed for the authors to withdraw their paper.
3). PEER REVIEW: All submitted papers are subject to strict peer-review process by at least three international reviewers that are experts in the area of the particular paper. The factors that are taken into account in review are relevance, soundness, significance, originality, readability and language. The possible decisions include acceptance, acceptance with revisions, or rejection.
4). If authors are encouraged to revise and resubmit a submission, there is no guarantee that the revised submission will be accepted.
5). Rejected articles will not be re-reviewed.
6). Articles may be rejected without review if they are obviously not suitable for publication.
7). The paper acceptance is constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism.
8). The reviewers evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.
9). The staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, other editorial advisers, and the publisher, as appropriate.
10). Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.
11). Peer review assists the publisher in making editorial decisions and through the editorial communications with the experts form the scientific board ant the author may also assist the author in improving the paper.
12). Manuscripts received for review are treated as confidential documents and are reviewed by anonymous staff.
13). A reviewer should also call to the publisher's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.
14). Authors of contributions and studies research should present an accurate account of the work performed as well as an objective discussion of its significance.
15). A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behavior and are unacceptable.
16). The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
17). Submitting the same manuscript to more than one publication concurrently constitutes unethical publishing behaviour and is unacceptable.
18). Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
20). Authors should make themselves aware of the paper processing charges and registration fees of the publication they submit a paper to by reading the respective sections.
Editorial Workflow
Editorial Workflow
*MANAGEMENT: Our Editor-in-Chief manages this Journal. Receives the articles from IARAS,
checks them, rejects those that are not appropriate and forwards to reviewers whatever he believes that deserves an evaluation via the system of peer review.
Co-Editors-in-Chief have an Advisory Role.
* OWNERSHIP: IARAS Publications Ltd.Manuscripts not adhering to journal guidelines will be returned to authors without scientific evaluation. Submitted manuscripts adhering to journal guidelines are reviewed by the Editor-in-Chief or an Editor, who will assign them to reviewers. The review process is single blind. The Editor prepares a decision letter according to the comments of the reviewers, which is sent to the corresponding author. All non-reviewed manuscripts are sent back within 10 days and decisions letters of manuscripts are sent within 4 weeks.
The editors of this journal take the responsibility to enforce a rigorous peer-review process together with strict ethical policies and standards to ensure to add high quality scientific works to the field of scholarly publication. Unfortunately, cases of plagiarism, data falsification, image manipulation, inappropriate authorship credit, and the like, do arise. The editors of the Journal take such publishing ethics issues very seriously and are trained to proceed in such cases with a zero tolerance policy.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
Authors wishing to publish their papers in the Journal are asked to abide to the following rules:
a) Any facts that might be perceived as a possible conflict of interest of the author(s) must be disclosed in the paper prior to submission.
b) Authors should accurately present their research findings and include an objective discussion of the significance of their findings.
c) Data and methods used in the research need to be presented in sufficient detail in the paper, so that other researchers can replicate the work.
d) Raw data should preferably be publicly deposited by the authors before submission of their manuscript. Authors need to at least have the raw data readily available for presentation to the referees and the editors of the journal, if requested. Authors need to ensure appropriate measures are taken so that raw data is retained in full for a reasonable time after publication.
f) Simultaneous submission of manuscripts to more than one journal is not tolerated.
Republishing content that is not novel is not tolerated (for example, an English translation of a paper that is already published in another language will not be accepted).
g) If errors and inaccuracies are found by the authors after publication of their paper, they need to be promptly communicated to the editors of this journal so that appropriate actions can be taken.
h) Your manuscript should not contain any information that has already been published. If you include already published figures or images, please obtain the necessary permission from the copyright holder to publish under the CC-BY license.
* Plagiarism, data fabrication and image manipulation are not tolerated.
* Plagiarism is not acceptable in IARAS submissions.
* Plagiarism includes copying text, ideas, images, or data from another source, even from your own publications, without giving any credit to the original source.
Reuse of text that is copied from another source must be between quotes and the original source must be cited. If a study's design or the manuscript's structure or language has been inspired by previous works, these works must be explicitly cited.
If plagiarism is detected during the peer review process, the manuscript may be rejected. If plagiarism is detected after publication, we may publish a correction or retract the paper.
Acceptance Rate
Acceptance Rate
International Journal of Mechanical Engineering currently has an acceptance rate of 30%.
Publication Fees
Publication Fees
IARAS Journals are Open Access journal accessible for free on the Internet. We guarantee that no university library or individual reader Food and Nutrition Science - An International Journal: Except the fees, IARAS does not have any other source of Revenue. 310 105 EUR /paper until December 31, 2024
will ever have to buy a subscription or pay any pay-per-view fees to access articles in the electronic version of the journal.
There is hence no revenue at IARAS neither from the sale of subscriptions to the electronic version of the journal nor from pay-per-view fees.
Yet, the online publication process does involve costs including those pertaining to setup and maintenance of the publication infrastructure, routine operation of the journal, processing of manuscripts through peer-reviews, editing, publishing, maintaining the scholarly record, and archiving. To cover these costs, the journals depends on Publication Fees. Publication Fees are due when a manuscript has been accepted for publication.310 105 EUR /paper until December 31, 2024
International Journal of Agricultural Science: 310 105 EUR /paper until December 31, 2024
International Journal of Applied Physics: 310 105 EUR /paper until December 31, 2024
International Journal of Biochemistry Research: 310 105 EUR /paper until December 31, 2024
International Journal of Biology and Biomedicine: 310 105 EUR /paper until December 31, 2024
International Journal of Chemistry and Chemical Engineering Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Circuits and Electronics: 310 105 EUR /paper until December 31, 2024
International Journal of Communications: 310 105 EUR /paper until December 31, 2024
International Journal of Computers: 310 105 EUR /paper until December 31, 2024
International Journal of Control Systems and Robotics: 310 105 EUR /paper until December 31, 2024
International Journal of Cultural Heritage: 310 105 EUR /paper until December 31, 2024
International Journal of Economics and Management Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Education and Learning Systems: 310 105 EUR /paper until December 31, 2024
Journal of Electromagnetics: 310 105 EUR /paper until December 31, 2024
International Journal of Environmental Science: 310 105 EUR /paper until December 31, 2024
International Journal of Instrumentation and Measurement: 310 105 EUR /paper until December 31, 2024
International Journal of Internet of Things and Web Services: 310 105 EUR /paper until December 31, 2024
International Journal of Mathematical and Computational Methods: 310 105 EUR /paper until December 31, 2024
International Journal of Mechanical Engineering: 310 105 EUR /paper until December 31, 2024
International Journal of Medical Physiology: 310 105 EUR /paper until December 31, 2024
International Journal of Power Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Renewable Energy Sources: 310 105 EUR /paper until December 31, 2024
International Journal of Signal Processing: 310 105 EUR /paper until December 31, 2024
International Journal of Theoretical and Applied Mechanics: 310 105 EUR /paper until December 31, 2024
International Journal of Tourism: 310 105 EUR /paper until December 31, 2024
International Journal of Transportation Systems: 310 105 EUR /paper until December 31, 2024
International Journal of Veterinary Medicine: 310 105 EUR /paper until December 31, 2024
IARAS does not have subscriptions, does not have advertising revenue, does not sell reprints, and does not have any other institutional or organizational support.
Publishing fees or waiver status should not influence editorial decision making.
Sometimes, excellent papers might be published without fees, especially if the comments from the three Reviewers are that the article does not need corrections and can be published "as it is" or if the authors have special financial difficulties.
IARAS does not have Direct Marketing Activities
Reviewers Acknowledgment
Reviewers Acknowledgment
So far for the "International Journal of Environmental Science"
we have used the following Reviewers
Rosca Adrian
Bensafi Abd-El-hamid
Hsien-lun Wong Alan
Jose Alberto Duarte Moller
Adamou-mitiche Amel Baha Houda
Alina Adriana Minea
Mohammad Al-Amri
Alexander N. Pisarchik
Asher Yahalom
Athina Lazakidou
Cristian Patrascioiu
Catalin Popescu
Daniela Ghelase
Daniela Cristina Momete
Cotoros Diana
Anton V. Doroshin
Chandrasekaran Manoharan
Digital Preservation
IARAS is partnering with Portico to preserve collections from its Digital Archives products. Digital Preservation
IARAS’s Portico participation means that there will be uninterrupted access to the historical content in these collections.
IARAS launched its Digital Archives in 2016 as part of an ongoing initiative to digitize important primary documents of historical source materials used by scholars and students.
EBSCO will be taking part in Portico’s D-Collection Preservation Service which preserves digitized historic collections on behalf of participating publishers.
This service is solely supported by publishers that have committed their collections to the archive and more than 120 d-collections are preserved in Portico today.
Contact Information
Contact Information
*Neofit Rilski 61, Sofia 1000, BULGARIA Αnnexes: ENSEIRB rue A Schweitzer 33400, Talence, FRANCE Metohiu 45, Nicosia, 1101, CYPRUS
Email: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.
Submit a Manuscript
Submit a Manuscript
Manuscripts should be submitted by one of the authors of the manuscript through the online manuscript submission system: Paper Submission
Current e-mail addresses must be provided for all suggested reviewers.
Regardless of the source of the word-processing tool, only electronic MS-Word or PDF or LaTeX files can be submitted through the online submission system: Paper Submission
If for some technical reason online submission is not successful, the author can submit the manuscript to This email address is being protected from spambots. You need JavaScript enabled to view it.