oalogo2  

AUTHOR(S):

Alaa’Abuqubaita, Sameer Khader, Abdel Karim Daud, Hamza Makhamreh

 

TITLE

Finite Control Set – Model Predictive Control of a Nine Level Packed U Cell Grid Connected Multilevel Inverter

pdf PDF

ABSTRACT

This paper describes a photovoltaic-grid connected Nine Level Packed U Cell (PUC9) topology using a Finite Control Set – Model Predictive Control (FCS-MPC) technique. The proposed system is a singlephase multilevel inverter, with four pairs of switches that work in a complementary matter, one DC source and two flying capacitors connected to the grid through a filtering inductor. This topology has the ability to generate nine different voltage levels with less number of active and passive components comparing with conventional multilevel inverter topologies. The proposed control technique (FCS-MPC) aims at reducing the total harmonic distortion (THD) of the grid injected current while balancing the capacitors’ voltages at their nominal reference values. Robustness analysis of the proposed model including the effect of a step change in the injected current into the grid, parameters’ mismatching, and grid voltage sag and swell have been conducted on a single phase low power (PUC9) inverter. Theoretical analysis, mathematical modelling and simulation results using MATLAB/SIMULINK software are presented in this paper. The obtained THD of the injected current for the proposed model is 1.13% and the capacitors’ voltages error is less than 5%.

KEYWORDS

Multi Level Inverter, Genetic Algorithm, Packed U Cell Inverter, Total harmonic Distort

 

Cite this paper

Alaa’Abuqubaita, Sameer Khader, Abdel Karim Daud, Hamza Makhamreh. (2019) Finite Control Set – Model Predictive Control of a Nine Level Packed U Cell Grid Connected Multilevel Inverter. International Journal of Control Systems and Robotics, 4, 11-20

 

cc.png
Copyright © 2019 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0