oalogo2  

AUTHOR(S):

Badea Lepadatescu

 

TITLE

Studies to avoid breaking tool in manufacturing by broaching operation

pdf PDF

ABSTRACT

In the paper is presented a study on the conditions to be met by the clamping device for the processing of the internal surfaces on the broaching machines. It is especially emphasized that in most cases, devices with spherical support are used for clamping the parts on the machine tool. They provide good conditions for avoiding the breaking of the broaching tool and meeting the dimensional, quality and geometrical conditions required by the technical documentation of the parts. The paper specifies the maximum and minimum limits between the size of the spherical device for a good execution of the broaching operation.

KEYWORDS

spherical device, concentricity, roughness, safety work

REFERENCES

[1] Boothroyd, G., and W.A. Knight, - Fundamentals of Machining and Machine Tools. 2d ed. New York: Marcel Deckker, 1989.

[2] Reshetov, D. N., and V.T. Portman, - Accuracy of machine Tools. New York: American Society of Mechanical Engineers, 1989.

[3] Weck, M. – Handbook of Machine Tools, - New York: Wiley, 1984.

[4] Orlov, P, - Fundamentals of machine design. Vol. IV, Moscow, Mir Publishers, 1997.

[5] Tochterman-Bodenstein, - Konstructionselemente des maschinenbaues. Vol.I. Berlin, Springer Verlag, 1998.

[6] Vidosic, J. P., - Metal Machining and forming technology. The Ronald press company. New York, 1984.

[7] Walker, J., - Machining fundamentals. Chicago, Goodheart- Willcox, 1989.

Cite this paper

Badea Lepadatescu. (2018) Studies to avoid breaking tool in manufacturing by broaching operation. International Journal of Theoretical and Applied Mechanics, 3, 42-48

 

cc.png
Copyright © 2018 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0