Revolt a Performance of IMD by Rectified Number of MLI Through Simulink Computational Method

PDF

ABSTRACT

Titled research work has been dealt with three different topologies of Multilevel Inverter. In the past decades, the researchers have dealt with the conventional topology one which possesses the twelve switches of Multilevel Inverter is applied to an Induction motor drive. The present research work has been introduced a new topology II system which reduces 10 and 5 switches in induction motor. The performance of the research work has been investigated through MATLAB simulation.

KEYWORDS

Conventional Topology; Multilevel Inverter; Total Harmonics Distortion

REFERENCES

[1] Ebrahim Babaei, “ A New General Topology for Cascaded Multilevel Inverters With Reduced Number of Components Based on Developed H-Bridge” , IEEE Transactions Industrial Electronics, Vol. 61, No. 8, August 2014.

[2] Prachi Salodkar, “ A New Simplified Multilevel Inverter Topology for Grid-Connected Application” , 2014 IEEE Students’ Conference on Electrical, Electronics and Computer Science. 978-1-4799-2526-1/14/$31.00 ©2014 IEEE.

[3] S.Umasankar, “ A New 7-Level Symmetric Multilevel Inverter with Minimum Number of Switches” , Hindawi Publishing Corporation ISRN Electronics Volume 2013, Article ID 476876.

[4] D P.Kothari, “Cascaded Seven Level Inverter With Reduced Number Of Switches Using Level Shifting PWM Technique”, 2013 International conference on power, energy and control (ICPEC).pp 676-679.

[5] Y.Hinago and H. Koizumi, “A singlephase multilevel inverter using switched series/parallel dc voltage sources,” IEEE Trans. Ind. Electron., vol. 57, no. 8, pp. 2643–2650, Aug. 2010.

[6] G. Waltrich and I. Barbi, “Three-phase cascaded multilevel inverter using power cells with two inverter legs in series,” IEEE Trans. Ind. Appl.,vol. 57, no. 8, pp. 2605–2612, Aug. 2010.

[7] W. K. Choi and F. S. Kang, “H-bridge based multilevel inverter using PWM switching function,” in Proc. INTELEC, 2009, pp. 1–5.

[8] E. Babaei, M. Farhadi Kangarlu, and F. Najaty Mazgar, “Symmetric and asymmetric multilevel inverter topologies with reduced switching devices,” Elect. Power Syst. Res., vol. 86, pp. 122–130, May 2012.

[9] J. Ebrahimi, E. Babaei, and G. B. Gharehpetian, “A new multilevel converter topology with reduced number of power electronic components,” IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 655–667, Feb. 2012.

[10] E. Babaei, S. H. Hosseini, G. B. Gharehpetian, M. Tarafdar Haque, and M. Sabahi, “Reduction of DC voltage sources and switches in asymmetrical multilevel converters using a novel topology,” Elect. Power Syst. Res., vol. 77, no. 8, pp. 1073–1085, Jun. 2007.

[11] E. Babaei and S. H. Hosseini, “New cascaded multilevel inverter topology with minimum number of switches,” Energy Convers. Manage., vol. 50, no. 11, pp. 2761–2767, Nov. 2009.

[12] S.Daher, J.Schmid, and F.L.M. Antnus, “ Multilevel Inverter Topologies For Stand Alone P.V System” ,IEEE trans.ind.electronics.,vol.55,no.7,pp,2703- 2712,july 2008.

[13] J.Rodriguez,J.Lai,And F.Z.Peng, “Multilevel Inverters: A Survey Of Topologies, Controls and Application” , IEEE Transactions On Industrial Electronics, Vol. 49, No. 4, August 2002.

Cite this paper

P.Rajan, P.Ranjith. (2018) Revolt a Performance of IMD by Rectified Number of MLI Through Simulink Computational Method. International Journal of Power Systems, 3, 58-74