REFERENCES
[1] B. Illés, P. Tamás, P. Dobos, R. Skapinyecz, New challenges for quality assurance of manufacturing processes in industry 4.0, Solid State Phenomena, Vol. 261, 2017, pp. 481– 486, DOI 10.4028/www.scientific.net/SSP.261.481.
[2] L. Dudás, Developing a rotary internal combustion engine characterised by high speed operation, Lecture Notes in Mechanical Engineering, Vol. PartF12, 2017, pp. 7989, DOI 10.1007/9783319511894_8.
[3] J. Kundrák, K. Gyáni, C. Felhő, I. Deszpoth, The Effect of the Shape of Chip Cross Section on Cutting Force and Roughness when Increasing Feed in Face Milling, Manufacturing Technology, Vol. 17, No. 3, 2017, pp. 335342.
[4] W. Habrat, M. Motyka, K. Topolski, J. Sieniawski, Evaluation of the cutting force components and the surface roughness in the milling process of microand nanocrystalline titanium, Archives of Metallurgy and Materials, Vol. 61, No. 3, 2016, pp. 1033 1038, DOI 10.1515/amm20160226.
[5] I. Korkut, M.A. Donertas, The influence of feed rate and cutting speed on the cutting forces, surface roughness and toolchip contact length during face milling, Materials and Design, Vol. 28, 2007, pp. 308–312, DOI 10.1016/j.matdes.2005.06.002.
[6] H. Siller, C. Vila, C. Rodríguez, J. Abellán, Study of face milling of hardened AISI D3 steel with a special design of carbide tools, The International Journal of Advanced Manufacturing Technology, Vol. 40, No. 12, 2009, pp. 12–25, DOI 10.1007/s00170007 13090.
[7] J. Kundrák, C. Felhő, 3D roughness parameters of surfaces face milled by special tools, Manufacturing Technology, Vol. 16, No. 3, 2016, pp. 532538.
[8] B. Karpuschewski, J. Kundrák, T. Emmer, D. Borysenko, A new strategy in face milling  inverse cutting technology, Solid State Phenomena, Vol. 261, 2017, pp. 331–338, DOI 10.4028/www.scientific.net/SSP.261.331.
[9] J. Kundrák, T. Makkai, I. Deszpoth, Effect of cutting feed and chip size ratio on cutting force, Solid State Phenomena, Vol. 261, 2017, pp. 3– 8, DOI 10.4028/www.scientific.net/SSP.261.3.
[10] H.Q. Zheng, X.P. Li, Y.S. Wong, A.Y.C. Nee, Theoretical modelling and simulation of cutting forces in face milling with cutter runout, International Journal of Machine Tools and Manufacture, Vol. 39, No. 12, 1999, pp. 2003– 2018, DOI 10.1016/S08906955(99)000231.
[11] X.P. Li, H.Q. Zheng, Y.S. Wong, A.Y.C. Nee, An approach to theoretical modeling and simulation of face milling forces, Journal of Manufacturing Processes, Vol. 2, No. 4, 2000, pp. 225–240, DOI 10.1016/S1526 6125(00)700247.
[12] J. Kundrák, I. Deszpoth, V. Molnár, Comparative study of material removal in hard machining of bore holes, Tehnicki Vjesnik, Vol. 21, No. 1, 2014, pp. 183189.
[13] D.Y. Pimenov, V.I. Guzeev, T. Mikolajczyk, K. Patra, A study of the influence of processing parameters and tool wear on elastic displacements of the technological system under face milling. The International Journal of Advanced Manufacturing Technology, Vol. 92, No. 912, 2017, pp. 44734486, DOI 10.1007/s0017001705166.
[14] A. Matras, W. Zȩbala, R. Kowalczyk, Precision milling of hardened steel with CBN tools, Key Engineering Materials, Vol. 581, 2014, pp. 182187, DOI 10.4028/www.scientific.net/KEM.581.182.
[15] D.Y. Pimenov, Mathematical modeling of power spent in face milling taking into consideration tool wear, Journal of Friction and Wear, Vol. 26, No.1, 2015, pp. 4548, DOI 10.3103/S1068366615010110.
[16] P. Ižol, M. Vrabeľ, I. Maňková, Comparison of milling strategies when machining freeform surfaces, Materials Science Forum, Vol. 862, 2016, pp. 1825, DOI 10.4028/www.scientific.net/MSF.862.18.
[17] G. Varga, J. Kundrák, Effects of technological parameters on surface characteristics in face milling, Solid State Phenomena, Vol. 261, 2017, pp. 285292, DOI 10.4028/www.scientific.net/SSP.261.285.
[18] K. Saï, W. Bouzid, Roughness modeling in upface milling, The International Journal of Advanced Manufacturing Technology, Vol. 26, No. 4, 2005, pp. 324–329, DOI 10.1007/s0017000423052.
[19] M. Hadad, M. Ramezani, Modeling and analysis of a novel approach in machining and structuring of flat surfaces using face milling process, International Journal of Machine Tools and Manufacture, Vol. 105, 2016, pp. 32–44, DOI 10.1016/j.ijmachtools.2016.03.005.
[20] P. Franco, M. Estrems, F. Faura, A study of back cutting surface finish from tool errors and machine tool deviations during face milling, International Journal of Machine Tools and Manufacture, Vol. 48, 2008, pp. 112–123, DOI 10.1016/j.ijmachtools.2007.07.001.
[21] P. Nieslony, W. Grzesik, P. Laskowski, W. Habrat, FEMBased modelling of the influence of thermophysical properties of work and cutting tool materials on the process performance, Procedia CIRP, Vol. 8, 2013, pp. 38, DOI 10.1016/j.procir.2013.06.056.
[22] N.I. Galanis, D.E. Manolakos, Finite element analysis of the cutting forces in turning of femoral heads from AISI 316l stainless steel, Lecture Notes in Engineering and Computer Science, Vol. 2, 2014, pp. 12321237.
[23] E. Kaselouris, I.K. Nikolos, Y. Orphanos, M. Bakarezos, N. Papadogiannis, M. Tatarakis, V. Dimitriou, Elastoplastic study of nanosecondpulsed laser interaction with metallic films using 3D multiphysics FEM modeling, International Journal of Damage Mechanics, Vol. 25, No. 1, 2016, pp. 4255 DOI 10.1177/1056789515576553.
[24] E. Kaselouris, T. Papadoulis, E. Variantza, A. Baroutsos, V. Dimitriou, A study of explicit numerical simulations in orthogonal metal cutting, Solid State Phenomena, Vol. 261, 2017, pp. 339346, DOI 10.4028/www.scientific.net/SSP.261.339.
[25] X. Teng, D. Huo, W. Chen, E. Wong, L. Zheng, I. Shyha, Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius, Journal of Manufacturing Processes, Vol. 32, 2018, pp. 116126 DOI 10.1016/j.jmapro.2018.02.006.
[26] P. Nieslony, W. Grzesik, M. Bartoszuk, W. Habrat, Analysis of mechanical characteristics of face milling process of Ti6Al4V alloy using experimental and simulation data, Journal of Machine Engineering, Vol. 16, No. 3, 2016, pp. 5866.
[27] Q. Zhang, S. Zhang, J. Li, Three Dimensional Finite Element Simulation of Cutting Forces and Cutting Temperature in Hard Milling of AISI H13 Steel, Procedia Manufacturing, Vol. 10, 2017, pp. 3747, DOI 10.1016/j.promfg.2017.07.018.
[28] V. Gylienė, V. Eidukynas, The numerical analysis of cutting forces in High Feed face milling, assuming the milling tool geometry, Procedia CIRP, Vol. 46, 2016, pp. 436439, DOI 10.1016/j.procir.2016.03.132.
[29] C.P. Jesuthanam, S. Kumanan, P. Asokan, Surface roughness prediction using hybrid neural networks, Machining Science and Technology, Vol. 11, No. 2, 2007, pp. 271–286, DOI 10.1080/10910340701340141.
[30] S. Bharathi Raja, N. Baskar, Application of particle swarm optimization technique for achieving desired milled surface roughness in minimum machining time, Expert Systems with Applications, Vol. 39, No. 5, 2012, pp. 5982– 5989, DOI 10.1016/j.eswa.2011.11.110.
[31] P.M. Gopal, K. Soorya Prakash, Minimization of cutting force, temperature and surface roughness through GRA, TOPSIS and Taguchi techniques in end milling of Mg hybrid MMC, Measurement, Vol. 116, 2018, pp. 178–192, DOI 10.1016/j.measurement.2017.11.011.
[32] S. Wojciechowski, R.W. Maruda, G.M. Krolczyk, P. Niesłony, Application of signal to noise ratio and grey relational analysis to minimize forces and vibrations during precise ball end milling, Precision Engineering, Vol. 51, 2018, pp. 582596, DOI 10.1016/j.precisioneng.2017.10.014.
