TITLE

High Throughput Wireless Multihop Transmissions by Power Controlled Transmissions along Hop-by-Hop Shortening Route

pdf PDF

ABSTRACT

In data message transmissions in wireless multihop networks, intra-route collisions of data messages and control messages are required to be reduced or avoided for shorter transmission delay and higher end-to-end throughput of data messages. RH2SWL (Routing with Hop-by-Hop Shortening Wireless Links) avoids collisions between 2-hop neighbor intermediate wireless nodes and provides them more opportunities to forward data messages; however, 1-hop neighbor intermediate wireless nodes might forward data messages simultaneously, which causes collisions of data messages. This paper proposes an extension of RH2SWL introducing transmission power control of RTS/CTS control messages and intentional transmission interval of data messages in order to reduce collisions between data messages and control messages transmitted by 1-hop neighbor intermediate wireless nodes.

KEYWORDS

Wireless Multihop Networks, Sequence of Hop by Hop Shortening Wireless Links, Wireless Signal Transmission Power Control, RTS/CTS Control, Collision Avoidance

REFERENCES

[1] Chang, C.C., Chen, Y.D., Liao, W.H. and Shih K.P., “Transmission Power Adaptations for Data Collision Avoidance in Wireless Ad- Hoc Networks,” International Journal of Ad Hoc and Ubiquitous Computing, vol. 12, pp. 88–97 (2013).

[2] Fujii, T., Takahashi, M., Bandai, M., Udagawa, T. and Sasase, I., “An Efficient MAC Protocol in Wireless Ad-Hoc Networks with Heterogeneous Power Nodes,” Wireless Personal Multimedia Communications, 2002. The 5th International Symposium, pp. 776–780 (2002).

[3] Fujiwara, T., Sekiya, H., Bandai, M., Yokote, Y., Lu, J. and Yahagi, T., “A MAC Protocol for Broadcasting in Wireless Networks of Ad hoc Nodes with Heterogeneous Power Capabilities” International Symposium on Information Theory and its Applications, (2004).

[4] Lasowski, R. and Strassberger, M., “A Multi Channel Beaconing Service for Collision Avoidance in Vehicular Ad-Hoc Networks,” Proceedings of IEEE Vehicular Technology Conference (2011).

[5] Muqattash, A. and Krunz, M., “A Single- Channel Solution for Transmission Power Control inWireless Ad-Hoc Networks,” Proceedings of ACM MobiHoc (2004).

[6] Nguyen, D., Garcia-Luna-Aceves, J.J. and Obraczka, K., “Collision-Free Asynchronous Multi-Channel Access in Ad-Hoc Networks,” Proceedings of IEEE Global Telecommunications Conference (2009).

[7] Petig, T., Schiller, E.M. and Tsigas, P., “Self- Stabilizing TDMA Algorithms for Wireless Ad- Hoc Networks without External Reference,” Proceedings of the 13th Annual Mediterranean Workshop on Ad-Hoc Networking, pp. 87–94 (2013).

[8] Yang, Q. and Tang, B., “A TDMA based Media Access Control Protocol for Wireless Ad-Hoc Networks,” Proceedings of the 5th International Conference on Machine Vision (2013).

[9] “Wireless Systems for Industrial Automation: Process Control and Related Applications”, International Society of Automation, (2011).

Cite this paper

Satoshi Suda, Hiroaki Higaki. (2018) High Throughput Wireless Multihop Transmissions by Power Controlled Transmissions along Hop-by-Hop Shortening Route. International Journal of Computers, 3, 1-7

 

cc.png
Copyright © 2018 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0