REFERENCES
[1] N. Sammes, Fuel Cell Technology: Reaching towards commercialization,U.K.: Springer Verlag, 2006.
[2] G. Fontes, C. Turpin, S. Astier and T. A. Meynard, Interactions between fuel cells and power converters: Influence of current harmonics on a fuel cell stack, IEEE Trans. Power Electron., vol.22, no.2,pp.670678, Mar.2007.
[3] P. Thounthong, B. Davat, S. Rael, and P. Sethakul, Fuel starvation, IEEE Ind. Appl.Mag.,vol. 15, no.4, pp.5259, Jul./Aug. 2009.
[4] S. Wang, Y. Kenarangui, and B. Fahimi, Impact of boost converter switching frequency on optimal operation of fuel cell systems, in Proc. IEEE vehicle power propulsion cong.,2006, pp. 15.
[5] S.K. Mazumder, R.L. Burra, and K. Acharya, A ripplemitigating and energyefficient fuel cell powerconditioning system, IEEE Trans. Power Electron., vol. 22, no.4, pp. 14371452, Jul. 2007.
[6] B. Axelrod, Y. Berkovich, and A. Ioinovici, Switched capacitor/switchedinductor structures for getting transformerless hybrid DCDC PWM converters, IEEE Trans. Circuits Syst, I: Reg. Papers, vol. 55, no.2, pp.687696, Mar. 2008.
[7] Z./ Qun and F. C. Lee, High efficiency, high stepup DCDC converters, IEEE Trans. Power Electron., vol. 18, no. 1, pp.6573, Jan. 2003.
[8] H. YiPing, C. JiannFuh, L. TsorngJuu, and Y. LungSheng, A novel high stepup converter for a micro grid system, IEEE Trans. Power Electron., vol.26, no.4, pp. 11271136, Apr. 2011.
[9] L. Wuhua, F. Lingli, Z. Yi, H. Xiangning, X. Dewei, and W. Bin, High stepup and highefficiency fuelcell power generation system with active clamp flybackforward converter, IEEE Trans. Ind. Electron., vol. 59, no.1, pp. 599610, Jan.2012.
[10] Y. Changwoo, K. Joongeun, and C. Sewan, Multiphase DCDC converters using a boosthalf bridge cell for highvoltage and highpower applications, IEEE Trans. Power Electron., vol. 26, no. 2, pp. 381388, Feb. 2011.
[11] R. D Middlebrook, Transformerless DCtoDC converters with large conversion ratios, IEEE Trans. Power Electron., vol. 3, no.4, pp. 484 488, Oct. 1988.
[12] A. A. FArdoun and E. H. ismail, Ultra stepup DCDC converter with reduced switch stress, IEEE Trans. Ind. Appl., vol. 46, no.5, pp. 2025 2034, Sep./Oct. 2010.
[13] M. Prudente, L. L. Pfitscher, G. Emmendoerfer, E. F. Romaneli, and R. Gules, Votlage multiplier cells applied to nonisolated DCDC converters, IEEE Trans. Power Electron., vol.23, no.2, pp/ 871887, Mar. 2008.
[14] R. Gules, L. L. Pitscher, and L. C. Franco, An interleaved boost DCDC converter with large conversion ratio, in Proc. IEEE Int. Symp. Ind. Electron., 2003, pp. 411416.
[15] A. Shahin, M. Hinaje, J. Martin, S. Pierfederici, X. Rae, S. L. Rael, and B. Davat, High voltage ration DCDC converter for fuel cell applications, IEEE Trans. Ind. Electron., vol. 57, no.12, pp/ 39443955, Dec. 2010.
[16] P. Thounthong, P. Sethakul, X. Rae, S.L. Rael, and B. Davar, Fuel cell current ripple mitigation by interleaved technique for high power applications, in Proc. IEEE Ind. Appl. Soc. Annu. Meeting. Houston, TX. USA, 2009, pp. 18.
[17] X. Wu, L. Zhang, G. Shen, M. Shen, D. Xu and A. Ioinovici, A novel control method for lightloaded multiphase boost converter with voltage multiplier used as a frontend of a gridconnected fuelcell generation, in Proc. IEEE Energy convers. Congr. Expo., Phoenix, AZ, USA, 2011, pp. 413420.
[18] L. Zhang, G. Shen, M. Chen, A. Ioinovici, and Dehong Xu, Twophase interleaved boost converter with voltage multiplier under APS control method for fuel cell power system, in Proc. 7th Int. Power Electron. Motion control Conf., Jun. 25. 2012, vol.2, pp. 963967.
[19] S. Lee, P. Kim and Sewan Choi, High stepup softswithced converters using voltage multiplier cells, IEEE Trans. Power Electron., vol. 28, no. 7, pp/ 33793387, Jul. 2013.
