This paper presents an original model developed by finite element method to simulate the behavior of the material to the method "Blind Hole Drilling", to determine the residual stress. Modeling of this method is possible through the use of the "Birth and Death" which have some elements of ANSYS library. After obtaining the analysis of movements, appropriate loads, a node located from the center hole at a radius calculated. In this way it is easier to estimate the stresses and deformations of a piece. Several measurements are made and based on this model is given in ANSYS. In this way we can have a map of tensions and deformations in a material.
residual stress, method "Blind Hole Drilling", welded constructions
 G. Gârleanu, Computerization and optimization of technological processes, Bucuresti, 2007.
 D. Gârleanu, “Pressure Welding Technology," Ed.Bren, Bucuresti 2014
 W.H. Lee, Computer Simulation of Shaped Charge Problem Ed. World Scientific Publishing Co. Pte. Ltd.,2006.
 P., Krusl, A Pragmatic Introduction to the Finite Element Method for Thermal and Stress Analysis, Ed. World Scientific Publishing Co. Pte. Ltd., 2006 ANSYS Tutorials
 Witt, F., F. Lee and W. Rider “A Comparison of Residual Stress Measurements Using Blindhole Drill, Abrasive Jet, Trepan Ring.“ Presented at Society for Experimental Stress Analysis Meeting, Dearborn, Michigan, 1981
 Measurement Group, Inc.“Measurement of Residual Stress By The Blind Hole Drilling Method” 2001
 Rendler, N.J. and I.Vigness. “Hole-drilling Strain-gage Method of Measuring Residual Stresses”. Proceedings of the Society of Experimental Stress Analysis. Vol. XXIII, No.2, 1996, pp. 577-586.
 Measurement of Residual Stresses by the Hole- Drilling Strain Gage Method.-Tech Note TN 503-6, Vishay Micro-Measurements
 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method.” ASTM Standard E 837-01/2001.
Cite this paper
Delia Garleanu, Claudia Borda, Gabriel Garleanu, Victor Popovici. (2017) Model Residual Stress by Finite Element Method. International Journal of Mathematical and Computational Methods, 2, 322-326
Copyright © 2017 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0