oalogo2  

AUTHOR(S):

Mohamed Chaour, Khedidja Bouhamla, Mounira Bourebia, Sofiane Bolkroune

 

TITLE

Numerical study of quenching heat treatment: Influence of the cooling modes on the hardness

pdf PDF

ABSTRACT

This paper is part of a research project aimed at improving the mechanical properties and microstructural of the grinding ball. In this study, we are interested in the numerical analysis by the finite difference method of quenching to examine the influence of quenching media on cooling rate and hardness. The numerical calculation was carried out using the FORTRAN language. The study is carried out on two alloy steels C32 and C70, simulating cooling curves from TTT diagrams. The results obtained for different cooling modes show that the material structure, the cooling rate and the hardness depend on the cooling medium

KEYWORDS

Numerical analysis, finite difference, quenching media, alloy steels

REFERENCES

[1] H. Li, G. Zhao, S. Niu and Y. Luan, Optimization of technology parameters for the plane-strain component in the process of gas quenching, Applied Mathematical Modeling, Vol.32, 2008, pp. 860-872.

[2] H. Li, G. Zhao, L. He and Y. Mo, Solution of non-linear thermal transient problems by a new adaptive time-step method in quenching process, Applied Mathematical Modeling, Vol.33, 2009, pp. 329-342.

[3] O. El Fakir, L. Wang, D. Balint, J. P. Dear, J. Lin and T. A.Dean, Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA5754, International Journal of Machine Tools & Manufacture, Vol.87, 2014, pp. 39-48.

[4] H. Soejima, Y. Mitsutake, S. Illias, K. Tsubaki and M. Monde, Application of the spray quenching to T6 heat treatment of thick A6061 hollow cylinders, Procedia Engineering, Vol.105, 2015, pp. 776-786.

[5] S. Tsuboyama, T. Higashi, Y. Mitsutake, A. K. Mazumder, K. Tsubaki and S. Bin Illias, Characteristics of transient heat transfer and wetting phenomena during laminar jet quenching on rotating cylinder, Procedia Engineering, Vol.105, 2015, pp. 787-797.

[6] L. Hou, H. Cheng, J. Li, Z. Li, B. Shao and J. Hou, Phase Composition of T10 Steel during Gas Quenching, Procedia Engineering, Vol.31, 2012, pp. 682-687.

[7] X. Han, Y. Zhong, K. Yang, Z. Cuiand J. Chen, Application of hot stamping process by integrating quenching &partitioning heat treatment to improve mechanical properties, Procedia Engineering, Vol.81, 2014, pp. 737- 743.

[8] P. Z.Cao, G. Z. Liuand K. Wu, Study of heat treatment parameters for large-scale hydraulic steel gate track, Water Science and Engineering, Vol.6, 2013, pp. 423-432.

[9] Y. Zhang, X. Jia, H. Sun, B. Sun, B. Liu, H. Liu, L. Kong and H. Ma, Enhanced thermoelectric performance of nanostructured CNTs/BiSbTe bulk composite from rapid pressure-quenching induced multi-scale microstructure, Journal of Materiomics, Vol.XX, 2016, pp. 1-8.

[10] P. Carlone, G. S. Palazzo and R. Pasquino, Finite element analysis of the steel quenching process: Temperaturefield and solid-solid phase change, Computers and Mathematics with Applications, Vol.59, 2010, pp. 585-594.

[11] X. Deng and D. Ju, Modeling and Simulation of Quenching and Tempering Process in steels, Physics Procedia, Vol.50, 2013, pp. 368-374.

[12] M. G. Teixeira, M. A. Rincon and I. S. Liu, Numerical analysis of quenching – Heat conduction in metallic materials, Applied Mathematical Modeling, Vol.33, 2009, pp. 2464-2473.

[13] V. Srinivasan, K. M. Moon, D. Greif, D. M. Wang and M. H. Kim, Numerical simulation of immersion quenching process of an engine cylinder head, Applied Mathematical Modeling, Vol.34, 2010, pp. 2111-2128.

Cite this paper

Mohamed Chaour, Khedidja Bouhamla, Mounira Bourebia, Sofiane Bolkroune. (2017) Numerical study of quenching heat treatment: Influence of the cooling modes on the hardness. International Journal of Theoretical and Applied Mechanics, 2, 115-118

 

cc.png
Copyright © 2017 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0