Almeida, A., Cunha, J., The implementation of an Activity-Based Costing (ABC) system in a manufacturing company, Procedia Manufacturing, Vol.13, 2017, pp. 932-939.
 Gottmann, J., Pfeffer, M., Sihn, W., Process Oriented Production Evaluation, Procedia CIRP, No.12, 2013, pp. 336-341.
 Musinszki, Z., Cost Allocation Problems and Solutions, Controller Info, No.4, 2015, pp. 2- 10.
 Hammer, M., Somers, K., Karre, H., Ramsauer, C., Profit per Hour as a Target Process Control Parameter for Manufacturing Systems Enabled by Big Data Analytics and Industry 4.0 Infrastructure, Procedia CIRP, No.63., 2017, pp. 715-720.
 Santana, A., Afonso, P., Zanin, A., Wernke, R., Costing Models for Capacity Optimization in Industry 4.0: Trade-Off between Used Capacity and Operational Efficiency, Procedia Manufacturing, Vol.13, 2017, pp. 1183-1190.
 Pandey, M.D., van der Weide, J.A.M., Stochastic Renewal Process Models for Estimation of Damage Cost over the Life-Cycle of a Structure, Structural Safety, Vol.67, 2017, pp. 27-38.
 Tamas, P., Application of a Simulation Investigational Method for Efficiency Improvement of SMED Method, Academic Journal of Manufacturing Engineering, Vol.15, No.2, 2017, pp. 23-30.
 Kumar, R., Roy, S., Gunjan, P, Sahoo, A., Sarkar, D.D., Das, R.K., Analysis of MRR and Surface Roughness in Machining Ti-6Al-4V ELI Titanium Alloy Using EDM Process, Procedia Manufacturing, No.20, 2018, pp. 358-364.
 Hernandez, A.E.B., Beno, T., Repo, J., Wretland, A., Integrated Optimization Model for Cutting Data Selection Based on Maximal MRR and Tool Utilization in Continuous Machining Operations, CIRP Journal of Manufacturing Science and Technology, Vol.13, 2016, pp. 46-50.
 Ramana, M.V., Kumar, G., Optimization of Material Removal Rate in Turning of AISI 321 Stainless Steel Using Taguchi Methodology, Materials Today: Proceedings, No.5, 2018, pp. 4965-4970.
 Tamiloli, N., Venkatesan, J., Ramnath, B.V., A grey-fuzzy modeling for evaluating surface roughness and material removal rate of coated end milling insert, Measurement, No.84, 2016, pp. 68-82.
 Das, D., Sahoo, B.P., Bansal, S., Mishra, P., Experimental investigation on material removal rate and chip forms during turning T6 tempered Al 7075 alloy, Materials Today: Proceedings, No.5, 2018, pp. 3250-3256.
 Buj-Corral, I., Vivancos-Calvet, J., Coba- Salcedo, M., Modelling of surface finish and material removal rate in rough honing, Precision Engineering, No.38, 2014, pp. 100- 108.
 Mohammadi, A., Tehrani, A.F., Emanian, E., Karimi, D., Statistical analysis of wire electrical discharge turning on material removal rate, Journal of Materials Processing Technology, No.205, 2008, pp. 283-289.
 Tonday, H.R., Tigga, A.M., Evaluation of the Influence of Wire Electrical Discharge Machining Parameters on Material Removal Rate and Surface Characteristics in Cutting of Inconel 825, Materials Today: Proceedings, No.4, 2017, pp. 9865-9869.
 Zeng, S., Blunt, L., Experimental investigation and analytical modelling of the effects of process parameters on material removal rate for bonnet polishing of cobalt chrome alloy, Precision Engineering, No.38, 2014, pp. 348- 355.
 Kumar, R., Bilga, P.S., Singh, S., Multi objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operation, Journal of Cleaner Production, No.164, 2017, pp. 45-57.
 Mukherjee, S., Kamal, A., Kumar. K., Optimization of Material Removal Rate During Turning of SAE 1020 Material in CNC Lathe using Taguchi Technique, Procedia Engineering, No.97, 2014, pp. 29.35.
 Budak, E., Tekeli, A., Maximizing Chatter Free Material Removal Rate in Milling through Optimal Selection of Axial and Radial Depth of Cut, CIRP Annals, Vol.54, No.1, 2005, pp. 353-356.
 Sardinas, R.Q., Santana, M.R., Brindis, E.A., Genetic algorithm-based multi-objective optimization of cutting parameters in turning processes, Engineering Applications of Artificial Intelligence, No.19, 2006, pp. 127.133.
 Waikar, R.A., Guo, Y. B., A Comprehensive Characterization of 3D Surface Topography Induced by Hard Turning versus Grinding, Journal of Materials Processing Technology, No.197, 2008, pp. 189-199.
 Klocke, F., Brinkmeier, E., Weinert, K., Capability Profile of Hard Cutting and Grinding Process, Annals of the CIRP, Vol.54, No.2, 2005, pp. 22-54.
 Mamalis, A.G., Kundrak, J., Gyani, K., On the Dry Machining of Steel Surfaces Using Superhard Tools, The International Journal of Advanced Manufacturing Technology, Vol.12, No.3, 2002, pp. 157-162.
 Kundrak, J., Mamalis, A.G., Markopulos, A., Finishing of Hardened Boreholes: Grinding or Hard Cutting?, Materials and Manufacturing Processes, Vol.19, No.6, 2004, pp. 979-993.
 Awad, M.I., Hassan, N.M., Joint Decisions of Machining Process Parameters Setting and Lot- Size Determination with Environmental and Quality Cost Consideration, Journal of Manufacturing Systems, No.46, 2018, pp. 79- 92.
 Hallgren, S., Pejryd, L., Ekengren, J., Additive Manufacturing and High Speed Machining – Cost comparison of Short Lead Time Manufacturing Methods, Procedia CIRP, No.50, 2016, pp. 384-389.
 Kundrak, J., Varga, G., Deszpoth, I., Molnar, V., Some Aspects of Machining of Bore Holes, Applied Mechanics and Materials, No.309, 2013, pp. 126-132.